Manganese Chloride

CAS #:

Linear Formula:

MnCl2

MDL Number:

MFCD00011114

EC No.:

231-869-6

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Manganese(II) Chloride
MN2-CL-02-C.AHYD
Pricing > SDS > Data Sheet >
(3N) 99.9% Manganese(II) Chloride
MN2-CL-03-C.AHYD
Pricing > SDS > Data Sheet >
(4N) 99.99% Manganese(II) Chloride
MN2-CL-04-C.AHYD
Pricing > SDS > Data Sheet >
(5N) 99.999% Manganese(II) Chloride
MN2-CL-05-C.AHYD
Pricing > SDS > Data Sheet >

Manganese Chloride Properties (Theoretical)

Compound Formula Cl2Mn
Molecular Weight 125.84
Appearance pink crystals or crystalline powder
Melting Point 654° C (1,209° F)
Boiling Point 1,225° C (2,237° F)
Density 2.98 g/cm3
Solubility in H2O N/A
Exact Mass 124.87575 g/mol
Monoisotopic Mass 124.87575 g/mol

Manganese Chloride Health & Safety Information

Signal Word Danger
Hazard Statements H302
Hazard Codes Xn
Precautionary Statements P301 + P312 + P330
Flash Point Not applicable
Risk Codes 22-52
Safety Statements N/A
RTECS Number N/A
Transport Information UN 3077 9 / PGIII
WGK Germany 1
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 03/28/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Manganese Chloride

Product Number: All applicable American Elements product codes, e.g. MN2-CL-02-C.AHYD , MN2-CL-03-C.AHYD , MN2-CL-04-C.AHYD , MN2-CL-05-C.AHYD

CAS #: 7773-01-5

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
The substance is not classified according to the Globally Harmonized System (GHS).
GHS label elements not applicable
Hazard pictograms not applicable
Signal word not applicable
Hazard statements not applicable
Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P232 Protect from moisture.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Classification system:
NFPA ratings (scale 0 - 4)
1


Health = 1
Fire = 0
Reactivity = 0
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
*1


Health = *1
Fire = 0
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
CAS # / Substance Name
7773-01-5 Manganese dichloride
Identification number(s)
EC number: 231-869-6


SECTION 4. FIRST AID MEASURES

Description of first aid measures
General information: No special measures required.
If inhaled: Supply fresh air; consult doctor in case of complaints.
In case of skin contact: Generally the product does not irritate the skin.
In case of eye contact: Rinse opened eye for several minutes under running water.
If swallowed: If symptoms persist consult doctor.
Most important symptoms and effects, both acute and delayed:
No data available
Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture No data available
Advice for firefighters
Protective equipment: No special measures required.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: No special measures required.
Methods and materials for containment and cleanup: Pick up mechanically.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Precautions for safe handling No special measures required.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No data available


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems: No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
7773-01-5 manganese dichloride
PEL Ceiling limit value: 5 mg/m3
as Mn
REL Short-term value: 3 mg/m3
Long-term value: 1 mg/m3
as Mn
TLV Long-term value: 0.02* 0.1* mg/m3
as Mn; *respirable **inhalable fraction
Additional information: The lists that were valid during the creation were used as basis.
Exposure controls
ersonal protective equipment:
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Breathing equipment: Not required.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies by manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Safety glasses


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Manganese Chloride

High purity Manganese Chloride Chloride IonManganese Chloride (Manganese(II) Chloride, or Manganese Dichloride) is an excellent water soluble crystalline Manganese source for uses compatible with chlorides. Hydrate or anhydrous forms may be purchased. Forms include beads, flakes, powder, chunks, and others. Chloride compounds can conduct electricity when fused or dissolved in water. Chloride materials can be decomposed by electrolysis to chlorine gas and the metal. They are formed through various chlorination processes whereby at least one chlorine anion (Cl-) is covalently bonded to the relevant metal or cation. Ultra high purity and proprietary formulations can be prepared. The chloride ion controls fluid equilibrium and pH levels in metabolic systems. They can form either inorganic or organic compounds. Manganese Chloride is generally immediately available in most volumes. Ultra high purity and high purity compositions improve both optical quality and usefulness as scientific standards. Nanoscale elemental powders and suspensions, as alternative high surface area forms, may be considered. We also produce Manganese Chloride Solution. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Manganese Chloride Synonyms

Manganese(II) chloride, Manganese dichloride, Manganous chloride, Manganese(2+) dichloride, manganese chloride, Sacchite, Manganous chloride dihydrate, Manganese dichloride dihydrate, 38639-72-4

Chemical Identifiers

Linear Formula MnCl2
MDL Number MFCD00011114
EC No. 231-869-6
Beilstein/Reaxys No. N/A
Pubchem CID 24480
IUPAC Name manganese(2+) dichloride
SMILES Cl[Mn]Cl
InchI Identifier InChI=1S/2ClH.Mn/h2*1H;/q;;+2/p-2
InchI Key GLFNIEUTAYBVOC-UHFFFAOYSA-L

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Chlorine

Chlorine is a Block P, Group 17, Period 3 element. Its electron configuration is [Ne]3s23p5. The chlorine atom has a covalent radius of 102±4 pm and its Van der Waals radius is 175 pm. Chlorine ModelIn its elemental form, chlorine is a yellow-green gas. Chlorine is the second lightest halogen after fluorine. It has the third highest electronegativity and the highest electron affinity of all elements, making it a strong oxidizing agent. It is rarely found by itself in nature. Chlorine was discovered and first isolated by Carl Wilhelm Scheele in 1774. It was first recognized as an element by Humphry Davy in 1808.

Manganese

See more Manganese products. Manganese (atomic symbol: Mn, atomic number: 25) is a Block D, Group 7, Period 4 element with an atomic weight of 54.938045. Manganese Bohr ModelThe number of electrons in each of Manganese's shells is [2, 8, 13, 2] and its electron configuration is [Ar] 3d5 4s2. The manganese atom has a radius of 127 pm and a Van der Waals radius of 197 pm. Manganese was first discovered by Torbern Olof Bergman in 1770 and first isolated by Johann Gottlieb Gahn in 1774. In its elemental form, manganese has a silvery metallic appearance. Elemental ManganeseIt is a paramagnetic metal that oxidizes easily in addition to being very hard and brittle. Manganese is found as a free element in nature and also in the minerals pyrolusite, braunite, psilomelane, and rhodochrosite. The name Manganese originates from the Latin word mangnes, meaning "magnet."

TODAY'S TOP DISCOVERY!

March 28, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy

U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy