Sodium Selenate Decahydrate

CAS #:

Linear Formula:

Na2SeO4 • 10H2O

MDL Number:

MFCD00149174

EC No.:

236-501-8

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Sodium Selenate Decahydrate
NA-SEAT-02-C.10HYD
Pricing > SDS > Data Sheet >
(3N) 99.9% Sodium Selenate Decahydrate
NA-SEAT-03-C.10HYD
Pricing > SDS > Data Sheet >
(4N) 99.99% Sodium Selenate Decahydrate
NA-SEAT-04-C.10HYD
Pricing > SDS > Data Sheet >
(5N) 99.999% Sodium Selenate Decahydrate
NA-SEAT-05-C.10HYD
Pricing > SDS > Data Sheet >

Sodium Selenate Decahydrate Properties (Theoretical)

Compound Formula H20Na2O14Se
Molecular Weight 188.94
Appearance White crystals
Melting Point 35 °C (dec.)
Boiling Point N/A
Density 1.6 g/cm3
Solubility in H2O Soluble
Exact Mass 369.981 g/mol
Monoisotopic Mass 369.981 g/mol

Sodium Selenate Decahydrate Health & Safety Information

Signal Word Danger
Hazard Statements H301-H331-H373-H410
Hazard Codes T, N
Precautionary Statements P261-P273-P301 + P310-P311-P501
Risk Codes 23/25-33-50/53
Safety Statements 20/21-28-45-60-61
RTECS Number VS6650000
Transport Information UN 2630 6.1/PG 1
WGK Germany 2
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/19/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Sodium Selenate Decahydrate

Product Number: All applicable American Elements product codes, e.g. NA-SEAT-02-C.10HYD , NA-SEAT-03-C.10HYD , NA-SEAT-04-C.10HYD , NA-SEAT-05-C.10HYD

CAS #: 10102-23-5

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Acute oral toxicity Category 3
Acute Inhalation Toxicity - Dusts and Mists Category 3
Specific target organ toxicity - (repeated exposure) Category 2
Label Elements

Skull and Crossbones - GHS06 Health Hazard - GHS08 Environment - GHS09

Signal Word
Danger
Hazard Statements
Toxic if swallowed
Toxic if inhaled
May cause damage to organs through prolonged or repeated exposure
Precautionary Statements
Prevention
Wash face, hands and any exposed skin thoroughly after handling
Do not eat, drink or smoke when using this product
Use only outdoors or in a well-ventilated area
Do not breathe dust/fume/gas/mist/vapors/spray
Response
Get medical attention/advice if you feel unwell
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Call a POISON CENTER or doctor/physician
Ingestion
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
Rinse mouth
Storage
Store locked up
Store in a well-ventilated place. Keep container tightly closed
Disposal
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC)
Very toxic to aquatic life with long lasting effects


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Component
Selenic acid, disodium salt, decahydrate
CAS-No
10102-23-5


SECTION 4. FIRST AID MEASURES

General Advice
Show this safety data sheet to the doctor in attendance. Immediate medical attention is required.
Eye Contact
In the case of contact with eyes, rinse immediately with plenty of water and seek medical
advice. Rinse immediately with plenty of water, also under the eyelids, for at least 15
minutes.
Skin Contact
Wash off immediately with plenty of water for at least 15 minutes. Immediate medical
attention is required.
Inhalation
Move to fresh air. If not breathing, give artificial respiration. Do not use mouth-to-mouth
method if victim ingested or inhaled the substance; give artificial respiration with the aid of a
pocket mask equipped with a one-way valve or other proper respiratory medical device.
Immediate medical attention is required.
Ingestion
Do not induce vomiting. Call a physician or Poison Control Center immediately.
Most important symptoms and effects
None reasonably foreseeable.
Notes to Physician
Treat symptomatically


SECTION 5. FIREFIGHTING MEASURES

Suitable Extinguishing Media
Not combustible.
Unsuitable Extinguishing Media
No information available
Flash Point
No information available
Method - No information available
Autoignition Temperature
No information available
Explosion Limits
Upper No data available
Lower No data available
Sensitivity to Mechanical Impact
No information available
Sensitivity to Static Discharge
No information available
Specific Hazards Arising from the Chemical
Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous Combustion Products
Selenium oxide Sodium oxides
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Precautions
Ensure adequate ventilation. Use personal protective equipment. Avoid dust formation.
Keep people away from and upwind of spill/leak. Evacuate personnel to safe areas.
Environmental Precautions
Do not flush into surface water or sanitary sewer system. Do not allow material to
contaminate ground water system. Prevent product from entering drains. Local authorities
should be advised if significant spillages cannot be contained. Should not be released into
the environment.
Methods for Containment and Clean Up
Sweep up or vacuum up spillage and collect in suitable container for disposal. Avoid dust
formation


SECTION 7. HANDLING AND STORAGE

Handling
Wear personal protective equipment. Do not get in eyes, on skin, or on clothing. Avoid dust
formation. Use only under a chemical fume hood. Do not breathe vapors/dust. Do not
ingest.
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Measures
Ensure adequate ventilation, especially in confined areas.
Personal Protective Equipment
Eye/face Protection
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin and body protection
Long sleeved clothing.
Respiratory Protection
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard
EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or other symptoms are experienced.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Physical State
Solid Crystalline
Appearance
White
Odor
No information available
Odor Threshold
No information available
pH
No information available
Melting Point/Range
35 °C / 95 °F
Boiling Point/Range
No information available
Flash Point
No information available
Evaporation Rate
Not applicable
Flammability (solid,gas)
No information available
Flammability or explosive limits
Upper
No data available
Lower
No data available
Vapor Pressure
No information available
Vapor Density
Not applicable
Specific Gravity
1.6 g/cm3
Solubility
No information available
Partition coefficient; n-octanol/water
No data available
Autoignition Temperature
No information available
Decomposition Temperature
No information available
Viscosity
Not applicable
Molecular Formula
Na2 SeO4.10H2 O
Molecular Weight
369.09 (188.94anhy)


SECTION 10. STABILITY AND REACTIVITY

Reactive Hazard
None known, based on information available
Stability
Stable under normal conditions.
Conditions to Avoid
Incompatible products.
Incompatible Materials
Oxidizing agents
Hazardous Decomposition Products
Selenium oxide, Sodium oxides
Hazardous Polymerization
Hazardous polymerization does not occur.
Hazardous Reactions
None under normal processing.


SECTION 11. TOXICOLOGICAL INFORMATION

Acute Toxicity
Product Information
Component Information
Toxicologically Synergistic Products
No information available
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Irritation
No information available
Sensitization
No information available
Carcinogenicity
Component
Selenic acid, disodium salt, decahydrate
IARC Not listed
NTP Not listed
ACGIH Not listed
OSHA Not listed
Mexico Not listed
Mutagenic Effects
No information available
Reproductive Effects
No information available.
Developmental Effects
No information available.
Teratogenicity
No information available.
STOT - single exposure
None known
STOT - repeated exposure
None known
Aspiration hazard
No information available
Symptoms / effects,both acute and delayed
No information available
Endocrine Disruptor Information
No information available
Other Adverse Effects
The toxicological properties have not been fully investigated.


SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity
Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. The product contains following
substances which are hazardous for the environment. May cause long-term adverse effects in the environment. Do not allow
material to contaminate ground water system.
Persistence and Degradability
based on information available. May persist
Bioaccumulation/ Accumulation
No information available.
Mobility
Will likely be mobile in the environment due to its water solubility.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste Disposal Methods
Chemical waste generators must determine whether a discarded chemical is classified as a
hazardous waste. Chemical waste generators must also consult local, regional, and
national hazardous waste regulations to ensure complete and accurate classification.


SECTION 14. TRANSPORT INFORMATION

DOT
UN-No UN2630
Proper Shipping Name SELENATES
Proper technical name (Sodium selenate decahydrate)
Hazard Class 6.1
Packing Group I
TDG
UN-No UN2630
Proper Shipping Name SELENATES
Hazard Class 6.1
Packing Group I
IATA
UN-No UN2630
Proper Shipping Name SELENATES
Hazard Class 6.1
Packing Group I
IMDG/IMO
UN-No UN2630
Proper Shipping Name SELENATES
Hazard Class 6.1
Packing Group I


SECTION 15. REGULATORY INFORMATION

U.S. Federal Regulations
TSCA 12(b) Not applicable
SARA 313 Not applicable
SARA 311/312 Hazard Categories See section 2 for more information
CWA (Clean Water Act) CWA - Toxic Pollutants
Clean Air Act HAPS Data
OSHA Not applicable
CERCLA Not applicable
California Proposition 65 This product does not contain any Proposition 65 chemicals
U.S. State Right-to-Know Regulations Not applicable
U.S. Department of Transportation
Reportable Quantity (RQ): N
DOT Marine Pollutant N
DOT Severe Marine Pollutant N
U.S. Department of Homeland Security
This product does not contain any DHS chemicals.

Other International Regulations
Mexico - Grade No information available


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Sodium Selenate Decahydrate

Selenate IonSodium Selenate Decahydrate is generally immediately available in most volumes. Hydrate or anhydrous forms may be purchased. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Sodium Selenate Decahydrate Synonyms

Disodium selenate decahydrate, selenic acid sodium salt decahydrate

Chemical Identifiers

Linear Formula Na2SeO4 • 10H2O
MDL Number MFCD00149174
EC No. 236-501-8
Beilstein/Reaxys No. N/A
Pubchem CID 202320
IUPAC Name disodium selenate decahydrate
SMILES O.O.O.O.O.O.O.O.O.O.[O-][Se](=O)(=O)[O-].[Na+].[Na+]
InchI Identifier InChI=1S/2Na.H2O4Se.10H2O/c;;1-5(2,3)4;;;;;;;;;;/h;;(H2,1,2,3,4);10*1H2/q2*+1;;;;;;;;;;;/p-2
InchI Key TYVNFQRMDPFYPC-UHFFFAOYSA-L

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Selenium

Selenium Bohr ModelSee more Selenium products. Selenium (atomic symbol: Se, atomic number: 34) is a Block P, Group 16, Period 4 element with an atomic radius of 78.96. The number of electrons in each of Selenium's shells is 2, 8, 18, 6 and its electron configuration is [Ar] 3d10 4s2 4p4. The selenium atom has a radius of 120 pm and a Van der Waals radius of 190 pm. Selenium is a non-metal with several allotropes: a black, vitreous form with an irregular crystal structure three red-colored forms with monoclinic crystal structures and a gray form with a hexagonal crystal structure, the most stable and dense form of the element. Elemental SeleniumOne of the most common uses for selenium is in glass production the red tint that it lends to glass neutralizes green or yellow tints from impurities in the glass materials. Selenium was discovered and first isolated by Jöns Jakob Berzelius and Johann Gottlieb Gahn in 1817. The origin of the name Selenium comes from the Greek word "Selênê," meaning moon.

Sodium

Sodium Bohr ModelSee more Sodium products. Sodium (atomic symbol: Na, atomic number: 11) is a Block D, Group 5, Period 4 element with an atomic weight of 22.989769. The number of electrons in each of Sodium's shells is [2, 8, 1] and its electron configuration is [Ne] 3s1. The sodium atom has a radius of 185.8 pm and a Van der Waals radius of 227 pm. Sodium was discovered and first isolated by Sir Humphrey Davy in 1807. In its elemental form, sodium has a silvery-white metallic appearance. It is the sixth most abundant element, making up 2.6 % of the earth's crust. Sodium does not occur in nature as a free element and must be extracted from its compounds (e.g., feldspars, sodalite, and rock salt). The name Sodium is thought to come from the Arabic word suda, meaning "headache" (due to sodium carbonate's headache-alleviating properties), and its elemental symbol Na comes from natrium, its Latin name.

TODAY'S TOP DISCOVERY!

December 19, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks

Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks