A Detailed Molecular Dynamics Simulation and Experimental Investigation on the Interfacial Bonding Mechanism of an Epoxy Adhesive on Carbon Steel Sheets Decorated with a Novel Cerium-Lanthanum Nanofilm.

Title A Detailed Molecular Dynamics Simulation and Experimental Investigation on the Interfacial Bonding Mechanism of an Epoxy Adhesive on Carbon Steel Sheets Decorated with a Novel Cerium-Lanthanum Nanofilm.
Authors G. Bahlakeh; B. Ramezanzadeh
Journal ACS Appl Mater Interfaces
DOI 10.1021/acsami.7b00644
Abstract

The influences of steel surface treatment by a novel cerium-lanthanum (Ce-La) nanofilm on the adhesion mechanism of an epoxy adhesive were studied through experimental and modeling approaches. The surface morphology and microstructure of the film deposited were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The surface free energy and work of adhesion values were evaluated through contact angle analysis. Also, the interfacial adhesion strength between the epoxy adhesive and steel surface, together with failure forms, were examined through pull-off test, under dry and wet conditions, and Fourier transform infrared (FT-IR) spectroscopy. The results obtained from experiments revealed that depositing a Ce-La nanofilm on the steel surface increased its roughness and surface free energy, and strengthened the epoxy coating adhesion. It was also observed that the epoxy adhesion on the Ce-La treated steel was stronger, compared to the Ce-treated surface. Furthermore, the adhesion extent and surface bonding mechanism of aminoamide-cross-linked epoxy resin were computationally modeled by applying atomistic molecular dynamics (MD) and electronic density functional theory (DFT) methods. The modeling results evidenced that epoxy resin adhered more strongly to the conversion layer (represented by CeO2 and La2O3), compared to an untreated steel surface (i.e., pure and oxidized iron). The epoxy binding onto CeO2(111), La2O3(001), Fe2O3(110), and Fe3O4(100) almost occurred via electrostatic interactions, while its adhesion mechanism over FeO(100) and Fe(110) surfaces was based on van der Waals forces. The computations also demonstrated that the epoxy adsorption energy decreased in wet environments, because of solvent affinity toward the epoxy and the surface, but the rate of reduction was smaller over CeO2 and La2O3, compared to that observed with iron oxides. These modeling outcomes were consistent with our experiments and proposed the superior epoxy adhesion on modified steel sheets.

Citation G. Bahlakeh; B. Ramezanzadeh.A Detailed Molecular Dynamics Simulation and Experimental Investigation on the Interfacial Bonding Mechanism of an Epoxy Adhesive on Carbon Steel Sheets Decorated with a Novel Cerium-Lanthanum Nanofilm.. ACS Appl Mater Interfaces. 2017;9(20):1753617551. doi:10.1021/acsami.7b00644

Related Elements

Carbon

See more Carbon products. Carbon (atomic symbol: C, atomic number: 6) is a Block P, Group 14, Period 2 element. Carbon Bohr ModelThe number of electrons in each of Carbon's shells is 2, 4 and its electron configuration is [He]2s2 2p2. In its elemental form, carbon can take various physical forms (known as allotropes) based on the type of bonds between carbon atoms; the most well known allotropes are diamond, graphite, amorphous carbon, glassy carbon, and nanostructured forms such as carbon nanotubes, fullerenes, and nanofibers . Carbon is at the same time one of the softest (as graphite) and hardest (as diamond) materials found in nature. It is the 15th most abundant element in the Earth's crust, and the fourth most abundant element (by mass) in the universe after hydrogen, helium, and oxygen. Carbon was discovered by the Egyptians and Sumerians circa 3750 BC. It was first recognized as an element by Antoine Lavoisier in 1789.

Cerium

See more Cerium products. Cerium (atomic symbol: Ce, atomic number: 58) is a Block F, Group 3, Period 6 element with an atomic weight of 140.116. The number of electrons in each of cerium's shells is 2, 8, 18, 19, 9, 2 and its electron configuration is [Xe]4f2 6s2. Cerium Bohr ModelThe cerium atom has a radius of 182.5 pm and a Van der Waals radius of 235 pm. In its elemental form, cerium has a silvery white appearance. Cerium is the most abundant of the rare earth metals. It is characterized chemically by having two valence states, the +3 cerous and +4 ceric states. The ceric state is the only non-trivalent rare earth ion stable in aqueous solutions. Elemental CeriumIt is therefore strongly acidic and oxidizing, in addition to being moderately toxic.The cerous state closely resembles the other trivalent rare earths. Cerium is found in the minerals allanite, bastnasite, hydroxylbastnasite, monazite, rhabdophane, synchysite and zircon. Cerium was discovered by Martin Heinrich Klaproth, Jöns Jakob Berzelius, and Wilhelm Hisinger in 1803 and first isolated by Carl Gustaf Mosander in 1839. The element was named after the asteroid Ceres, which itself was named after the Roman god of agriculture.

Lanthanum

See more Lanthanum products. Lanthanum (atomic symbol: La, atomic number: 57) is a Block F, Group 3, Period 6 element with an atomic weight of 138.90547. Lanthanum Bohr ModelThe number of electrons in each of lanthanum's shells is [2, 8, 18, 18, 9, 2] and its electron configuration is [Xe] 5d1 6s2. The lanthanum atom has a radius of 187 pm and a Van der Waals radius of 240 pm. Lanthanum was first discovered by Carl Mosander in 1838. In its elemental form, lanthanum has a silvery white appearance.Elemental Lanthanum It is a soft, malleable, and ductile metal that oxidizes easily in air. Lanthanum is the first element in the rare earth or lanthanide series. It is the model for all the other trivalent rare earths and it is the second most abundant of the rare earths after cerium. Lanthanum is found in minerals such as monazite and bastnasite. The name lanthanum originates from the Greek word Lanthaneia, which means 'to lie hidden'.