Barium Silicide Sputtering Target

CAS #:

Linear Formula:

BaSi2

MDL Number:

N/A

EC No.:

215-131-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Barium Silicide Sputtering Target
BA-SID-02-ST
Pricing > SDS > Data Sheet >
(3N) 99.9% Barium Silicide Sputtering Target
BA-SID-03-ST
Pricing > SDS > Data Sheet >
(4N) 99.99% Barium Silicide Sputtering Target
BA-SID-04-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Barium Silicide Sputtering Target
BA-SID-05-ST
Pricing > SDS > Data Sheet >

Barium Silicide Sputtering Target Properties (Theoretical)

Compound Formula BaH2Si2
Molecular Weight 1932.497
Appearance Gray solid
Melting Point 1180 °C
Boiling Point N/A
Density N/A
Solubility in H2O Reacts violently
Storage Temperature 15-20 °C
Exact Mass 193.859 g/mol
Monoisotopic Mass 193.859 g/mol
Charge N/A

Barium Silicide Sputtering Target Health & Safety Information

Signal Word Danger
Hazard Statements H260-H302-H312-H315-H319-H332
Hazard Codes F, Xi
Precautionary Statements P223-P231+P232-P261-P280-P301+P312-P302+P352-P304+P340-P305+P351+P338-P332+P313-P402+P404
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information UN2813 4.3/PG I
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/20/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Barium Silicide Sputtering Target

Product Number: All applicable American Elements product codes, e.g. BA-SID-02-ST , BA-SID-03-ST , BA-SID-04-ST , BA-SID-05-ST

CAS #: 1304-40-1

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Statement of Hazard:
Dangerous when wet, Irritant, Reacts violently with water
Acute Health Hazard:
Irritant to eyes, skin, mucous membranes and respiratory system.
May be harmful by ingestion, skin absorption and inhalation.
Chronic Health Hazard:
Not Available
To the best of our knowledge, the toxicological properties of this chemical have not been
thoroughly investigated. Use appropriate procedures and precautions to prevent or minimize
exposure.
HMIS Rating:
H: 1
F: 1
P: 2
NFPA Rating:
H: 1
F: 1
R: 2
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS):
Acute toxicity, dermal (Category 4), H312
Acute toxicity, inhalation (Category 4), H332
Acute toxicity, oral (Category 4), H302
Serious eye damage/eye irritation (Category 2A), H319
Skin corrosion/irritation (Category 2), H315
Substances and mixtures which, in contact with water, emit flammable gases (Category 1), H260
Pictogram:

Flame - GHS02 Exclamation Mark - GHS07

Signal Word: Danger
Hazard Statement(s):
H260 In contact with water releases flammable gases which may ignite spontaneously.
H302 Harmful if swallowed.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
Precautionary Statement(s):
P223 Keep away from any possible contact with water, because of violent reaction and possible flash fire.
P231+P232 Handle under inert gas. Protect from moisture.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312 IF SWALLOWED: call a POISON CENTER or doctor/physician
IF you feel unwell.
P302+P352 IF ON SKIN: wash with plenty of soap and water.
P304+P340 IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313 IF SKIN irritation occurs: Get medical advice/attention.
P402+P404 Store in a dry place. Store in a closed container.
Supplemental Statement(s):
EUH014 Reacts violently with water


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name: Barium silicide
Cas no.: 1304-40-1
EINECS Number: 234-547-3
Molecular Formula: BaSi2


SECTION 4. FIRST AID MEASURES

Eye Contact:
Flush eyes with large amounts of water for fifteen minutes. Separate eyelids with fingers. If irritation persists, seek medical attention.
Skin Contact:
Wash skin with soap and water. If irritation persists, seek medical attention.
Ingestion:
Do not induce vomiting. Seek medical attention.
Inhalation:
Move to a fresh air environment. Contact a physician if breathing becomes difficult.


SECTION 5. FIREFIGHTING MEASURES

Flash Point (ºC): Not Available
Explosion Limits: Not Available
Auto Ignition Temperature (ºC): Not Available
Extinguishing Media:
Carbon dioxide, dry chemical powder or alcohol-resistant foam. Do not use water spray.
Protective Equipment:
Wear self-contained respirator and fully protective impervious suit.
Specific Hazards:
May emit hazardous fumes under fire conditions. Reacts violently with water.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Protection:
Wear a self-contained breathing apparatus, rubber boots and gloves, and disposable coveralls. Dispose of coveralls after use. Remove from ignition sources if safe to do so. Follow emergency response plan and contact proper authorities if needed.
Keep unprotected persons away.
Environmental Protection:
Keep spills out of sewers and bodies of water. Dike and contain the spill with inert material. Absorb on sand, vermiculite or diatomite. Transfer material to a container for disposal or recovery. Ventilate area and wash spill site after material pickup is complete.


SECTION 7. HANDLING AND STORAGE

Handling and Storage:
Avoid breathing dust, vapor, mist or gas. Avoid contact with skin and eyes. Avoid prolonged or repeated exposure. Use only in a chemical fume hood. Open and handle container with care. Keep ignition sources away.
Store in a tightly closed container in a dry, well-ventilated place. Store
under inert gas. Store under nitrogen.
Sensitivities: Air, Moisture
Storage Temperature (ºC): 15 to 30


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Controls:
Use product in a well ventilated area or under a fume hood. Use proper lab equipment while handling this product. Keep away from incompatible materials for possible risk of hazardous reaction.
Eye Protection:
Wear appropriate protective eyeglass or chemical safety goggles. Make sure that there is an eyewash station in your vicinity.
Skin Protection:
Wear impervious gloves and protective clothing.
Respiratory Protection:
Use a NIOSH approved respirator when exposure limits are exceeded or if irritation or other symptoms are experienced.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Powder
Odor: Not Available
Odor Threshold: Not Available
Flash Point (ºC): Not Available
Auto Ignition Temperature (ºC): Not Available
Melting Point (ºC): Not Available
Boiling Point (ºC): Not Available
Evaporation Rate: Not Available
pH Value: Not Available
Density (g/cm³): Not Available
Refractive Index (n²ºD): Not Available
Viscosity: Not Available
Solubility in Water: Not Available
Solubility in Other: Not Available
Vapor Pressure (mmHg): Not Available
Vapor Density (Air=1): Not Available


SECTION 10. STABILITY AND REACTIVITY

Stability:
Stable under normal temperatures and pressures.
Incompatibility:
Strong oxidizing agents, water, alcohol, acids, bases
Reactivity:
Product may react with incompatible materials to release other hazardous substances.
Conditions to Avoid:
Heat, flame, sparks, other ignition sources.
Hazardous Decomposition Products:
Barium oxides, Silicon oxides


SECTION 11. TOXICOLOGICAL INFORMATION

RTECS Reference: Not Available
Target Organs: Not Available
Toxicity Data: Not Available
Carcinogenicity: National Toxicology Program (NTP) listed: Not Available
International Agency for Research on Cancer (IARC) listed: Not Available
Potential Symptoms: Not Available


SECTION 12. ECOLOGICAL INFORMATION

Toxicity: Not Available


SECTION 13. DISPOSAL CONSIDERATIONS

Contact a licensed professional waste disposal service. Dispose in a manner consistent with
federal, state and local environmental regulations.


SECTION 14. TRANSPORT INFORMATION

DOT Shipping Name: Water-Reactive Solid, N.O.S.
DOT UN Number: UN2813
DOT Hazard Class: Class 4.3
DOT Packing Group: PGI
IMDG Shipping Name: Water-Reactive Solid, N.O.S.
IMDG UN Number: UN2813
IMDG Hazard Class: Class 4.3
IMDG Packing Group: PGI
Marine Pollutant: No
IATA Shipping Name: Water-Reactive Solid, N.O.S.
IATA UN Number: UN2813
IATA Hazard Class: Class 4.3
IATA Packing Group: PGI


SECTION 15. REGULATORY INFORMATION

United States
Toxic Substance Control Act (TSCA) listed:
Yes
Superfund Amendments and Reauthorization Act (SARA 302) listed:
No
Superfund Amendments and Reauthorization Act (SARA 311/312) listed:
No
Superfund Amendments and Reauthorization Act (SARA 313) listed:
No
European Union
European Inventory of Existing Chemical Substances (EINECS): 234-547-3
Canada
Canadian Domestic Substances List (DSL) listed:
No
Canadian Non-Domestic Substances List (NDSL) listed:
Yes


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Barium Silicide Sputtering Target

American Elements specializes in producing high purity Barium Silicide Sputtering Targets with the highest possible density High Purity (99.99%) Barium Silicide Sputtering Targetand smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard sputtering targets for thin film deposition are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Rotary (cylindrical), round, rectangular, square, ring, annular, oval, "dog-bone" and other shaped targets are available in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. Please request a quote above for more information on lead time and pricing.

Barium Silicide Sputtering Target Synonyms

Barium disilicide

Chemical Identifiers

Linear Formula BaSi2
MDL Number N/A
EC No. 215-131-0
Beilstein/Reaxys No. N/A
Pubchem CID 92135802
IUPAC Name barium(2+); silicon(1-)
SMILES [Si-].[Si-].[Ba+2]
InchI Identifier InChI=1S/Ba.2Si/q+2;2*-1
InchI Key SLZXMZVNEHADNR-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

Barium

See more Barium products. Barium (atomic symbol: Ba, atomic number: 56) is a Block S, Group 2, Period 6 element with an atomic weight of 137.27. The number of electrons in each of barium's shells is [2, 8, 18, 18, 8, 2] and its electron configuration is [Xe] 6s2. Barium Bohr ModelBarium is a member of the alkaline-earth metals. The barium atom has a radius of 222 pm and a Van der Waals radius of 268 pm. Barium was discovered by Carl Wilhelm Scheele in 1772 and first isolated by Humphry Davy in 1808. Elemental BariumIn its elemental form, barium is a soft, silvery-gray metal. Industrial applications for barium include acting as a "getter," or unwanted gas remover, for vacuum tubes, and as an additive to steel and cast iron. Barium is also alloyed with silicon and aluminum in load-bearing alloys. The main commercial source of barium is the mineral barite (BaSO4); it does not occur naturally as a free element . The name barium is derived from the Greek word "barys," meaning heavy.

Silicon

See more Silicon products. Silicon (atomic symbol: Si, atomic number: 14) is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. Silicon Bohr MoleculeThe number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm. Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Elemental SiliconSilica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.

TODAY'S TOP DISCOVERY!

December 20, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks

Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks