SECTION 1. IDENTIFICATION
Product Identifiers: All applicable American Elements product codes for CAS #7783-48-4
Relevant identified uses of the substance: Scientific research and development
Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351
Emergency telephone number:
Domestic, North America +1 800-424-9300
International +1 703-527-3887
SECTION 2. HAZARDS IDENTIFICATION
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE
Harmful in contact with skin and eyes. Particular care must be exercised when machining and creating dust or particles.
2.2. LABEL ELEMENTS
Signal Word: Warning
H315 Causes skin irritation
H319 Causes serious eye irritation.
H332 Harmful if inhaled
Precautionary Statements:
P262 Do not breathe dust/fume/gas/mist/vapors/spray.
P301+P310 IF SWALLOWED: Immediately call a poison centre or doctor. Rinse mouth.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
2.3. OTHER HAZARDS
None
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1. SUBSTANCES
Component Name CAS number % EC number (EINECS) EU index UN number
Strontium Fluoride 7783-48-4 100% 232-000-3 - -
SECTION 4. FIRST AID MEASURES
4.1. DESCRIPTION OF FIRST AID MEASURES
GENERAL: Consult a doctor for specific advice.
EYES: Irrigate thoroughly with water for at least 15 minutes. Obtain medical attention.
SKIN: Wash thoroughly with soap and water. Dry area with clean towel. Remove contaminated clothing and wash clothing before re-use.
INHALATION: Remove to fresh air. Perform artificial respiration if breathing has stopped. When breathing is difficult, properly trained personnel may administer oxygen. Keep affected person warm and at rest. Obtain medical attention.
INGESTION: Induce vomiting if conscious and as directed by properly qualified personnel. Wash out mouth thoroughly with water. Never make an unconscious person vomit or drink fluids. Obtain Medical Attention Immediately!.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
Refer to Section 2.2 and to section 11.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
No Data.
SECTION 5. FIREFIGHTING MEASURES
5.1. EXTINGUISHING MEDIA
This product does not burn.
5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Material may evolve toxic fumes in a fire.
5.3. ADVICE FOR FIREFIGHTERS
Use breathing apparatus if necessary.
SECTION 6. ACCIDENTAL RELEASE MEASURES
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
Wear suitable protective clothing & equipment as listed under Section 8. Avoid making dust.
6.2. ENVIRONMENTAL PRECAUTIONS
Prevent further leakage or spillage. Do not let product enter drains. Do not discharge to the environment.
6.3. METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Take up and containerize for proper disposal. Containerize any cleaning materials used for proper disposal.
6.4. REFERENCE TO OTHER SECTIONS
Dispose as in Section 13.
SECTION 7. HANDLING AND STORAGE
7.1. PRECAUTIONS FOR SAFE HANDLING:
Keep away from heat. Avoid contact with skin and eyes. Protect against physical damage. Avoid generating dust.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Keep away from foodstuffs. Keep away from strong acids.
7.3. SPECIFIC END USES
Optical Material for Manufacture of Optical Components
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. CONTROL PARAMETERS
OCCUPATIONAL EXPOSURE LIMITS (OEL) = 2.5 mg/m3
EXPOSURE CONTROLS
Protective gloves made of PVA are required. Use of a laboratory coat is suggested. Safety goggles or safety glasses with side shields are required if there is any possibility of chipping or dust creation. Respirators must be worn when the threshold limit is exceeded. Provide adequate general mechanical ventilation, and local exhaust ventilation. Wash hands immediately after handling the product.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE : Clear glassy geometric shapes, no odour. FLASH POINT: Not Applicable
BOILING POINT (760mm Hg) 2460C FLAMMABILITY: Not Applicable
MELTING POINT: 1400C EXPLOSIVE PROPERTIES: Not Applicable
SPECIFIC GRAVITY: 4.24 g/mL Vapor PRESSURE: Negligible at 25C
SOLUBILITY IN WATER: 0.12 g/100ml H2O at 27C pH IN AQUEOUS SOLUTION: No data available
9.2. OTHER SAFETY INFORMATION
None
SECTION 10. STABILITY AND REACTIVITY
10.1. REACTIVITY
Reacts with strong mineral acids.
10.2. CHEMICAL STABILITY
Stable under normal conditions of storage and use
10.3. POSSIBILITY OF HAZARDOUS REACTIONS
None known
10.4. CONDITIONS TO AVOID
Avoid strong acids
10.5. INCOMPATIBLE MATERIALS
Strong Mineral Acids.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS
Decomposition product is Hydrogen Fluoride gas.
SECTION 11. TOXICOLOGICAL INFORMATION
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS
Toxic by ingestion and inhalation of dust, with a cumulative effect. Affects nervous system. Particular care must be exercised when machining and creating dust or particles. Inhalation of dust may irritate respiratory system.
TOXIC DOSE - LD50 > 10600 mg/kg (oral/rat) CARCINOGENICITY: No evidence of carcinogenic properties.
MUTAGENICITY/TERATOGENICITY: No evidence of reproductive effects.
SECTION 12. ECOLOGICAL INFORMATION
12.1. TOXICITY
Hazard to drinking water.
12.2. PERSISTENCE AND DEGRADABILITY
No Data
12.3. BIOACCUMULATIVE POTENTIAL
No Data
12.4. MOBILITY IN SOIL
No Data
12.5. RESULTS OF PBT AND vPvB ASSESSMENT
Not required or conducted
12.6. OTHER ADVERSE AFFECTS
The following applies to inorganic fluorides in general: biological effects: fish: L idus LC50 660mg/l; bacteria:Ps putida toxic from 231 mg/l up; algae: Sc quadricauda toxic from 249mg/l up; protozoa:E.sulcatum toxic from 101mg/l up; U parduczi toxic from 71mg/l up (all values as NaF). Hazard to drinking water.
The following applies to strontium compounds in general: toxic for aquatic organisms: fish: Salmo toxic from 1mg/l up; lethal from 1500mg/l up in 2 weeks, from 10g/l in 1 day, fish-nutrient animals: toxic from 3500mg/l up (values calculated as Sr)
SECTION 13. DISPOSAL CONSIDERATIONS
13.1. WASTE TREATMENT METHODS
Chemical residues are generally classified as special waste, and are covered by regulations which vary according to location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company.
SECTION 14. TRANSPORT INFORMATION
14.1. UN NUMBER: None
14.2. UN PROPER SHIPPING NAME:
Not subject to transportation regulations.
14.3. TRANSPORT HAZARD CLASS: None
14.4. PACKING GROUP: None
14.5. ENVIRONMENTAL HAZARDS: None
14.6. SPECIAL PRECAUTIONS FOR USER: None
14.7. TRANSPORT IN BULK MARPOL / IBC: No Data
SECTION 15. REGULATORY INFORMATION
15.1. SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS / LEGISLATION SPECIFIC FOR THE SUBSTANCE OR MIXTURE
TSCA: Not listed in the TSCA inventory
16. OTHER INFORMATION
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.
