Effects of an Erbium-Yttrium-Aluminum-Garnet (Er-YAG) Laser and an Ultrasonic Scaler on TiO2-Coated Titanium Surfaces Contaminated with Subgingival Plaque: an in Vitro Study to Assess Post-Treatment Biocompatibility to Osteogenic Cells.

Title Effects of an Erbium-Yttrium-Aluminum-Garnet (Er-YAG) Laser and an Ultrasonic Scaler on TiO2-Coated Titanium Surfaces Contaminated with Subgingival Plaque: an in Vitro Study to Assess Post-Treatment Biocompatibility to Osteogenic Cells.
Authors M. Giannelli; D. Bani; A. Tani; F. Materassi; F. Chellini; C. Sassoli
Journal J Periodontol
DOI 10.1902/jop.2017.170195
Abstract

BACKGROUND: We evaluated the effects of conventional ultrasonic scaler vs. Er-YAG laser on titanium surfaces contaminated with subgingival plaque from peri-implantitis patients in terms of: plaque and bio-corroded titanium oxide coating removal; surface change induction; residual biocompatibility towards osteoblasts.

METHODS: Subgingival plaque-coated titanium discs with moderately rough surface were fixed with ethanol and treated with ultrasonic scaler (metal tip) or Er-YAG laser (20.3 J/cm(2) or 38.2 J/cm(2)) in non-contact mode. Fluorescent detection of residual plaque was performed. Disc surface morphology was evaluated by scanning electron microscopy. Saos-2 osteoblasts viability, attachment, proliferation and differentiation on new and treated discs were assayed by propidium iodide/syto assay and confocal microscopic analysis of cytoskeleton, Ki67, expression of osteopontin and alkaline phosphatase and formation of mineralized nodules.

RESULTS: Both methods resulted in effective debridement of the treated surfaces, the plaque area being reduced to 11.7% with ultrasonic scaler and up to 0.03% with Er-YAG laser (38.2 J/cm(2)). The ultrasound-treated discs showed marked surface changes, incomplete removal of the TiO2 layer and scanty plaque aggregates, while Er-YAG laser (38.2 J/cm(2)) completely stripped away the plaque and TiO2 layer leaving a micro-pitted surface. Both treatments maintained a good bio-compatibility of the surfaces to Saos-2 osteoblasts. Air-water cooling kept the disc temperature below the critical threshold of 47°C.

CONCLUSIONS: This study shows that ultrasonic scaler with metal tip is less efficient than high-energy Er-YAG irradiation to remove plaque and TiO2 layer on anodized discs, although both procedures appear capable of restoring an adequate osseo-conductivity of the treated surfaces.

Citation M. Giannelli; D. Bani; A. Tani; F. Materassi; F. Chellini; C. Sassoli.Effects of an Erbium-Yttrium-Aluminum-Garnet (Er-YAG) Laser and an Ultrasonic Scaler on TiO2-Coated Titanium Surfaces Contaminated with Subgingival Plaque: an in Vitro Study to Assess Post-Treatment Biocompatibility to Osteogenic Cells.. J Periodontol. 2017:115. doi:10.1902/jop.2017.170195

Related Elements

Aluminum

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

Erbium

See more Erbium products. Erbium (atomic symbol: Er, atomic number: 68) is a Block F, Group 3, Period 6 element with an atomic radius of 167.259. Erbium Bohr ModelThe number of electrons in each of Erbium's shells is [2, 8, 18, 30, 8, 2] and its electron configuration is [Xe]4f12 6s2. The erbium atom has a radius of 176 pm and a Van der Waals radius of 235 pm. Erbium was discovered by Carl Mosander in 1843. Sources of Erbium include the mineral monazite and sand ores. Erbium is a member of the lanthanide or rare earth series of elements.Elemental Erbium Picture In its elemental form, erbium is soft and malleable. It is fairly stable in air and does not oxidize as rapidly as some of the other rare earth metals. Erbium's ions fluoresce in a bright pink color, making them highly useful for imaging and optical applications. It is named after the Swedish town Ytterby where it was first discovered.

Titanium

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.

Yttrium

See more Yttrium products. Yttrium (atomic symbol: Y, atomic number: 39) is a Block D, Group 3, Period 5 element with an atomic weight of 88.90585. Yttrium Bohr ModelThe number of electrons in each of yttrium's shells is [2, 8, 18, 9, 2] and its electron configuration is [Kr] 4d1 5s2. The yttrium atom has a radius of 180 pm and a Van der Waals radius of 219 pm. Yttrium was discovered by Johann Gadolin in 1794 and first isolated by Carl Gustav Mosander in 1840. In its elemental form, Yttrium has a silvery white metallic appearance. Yttrium has the highest thermodynamic affinity for oxygen of any element. Elemental YttriumYttrium is not found in nature as a free element and is almost always found combined with the lanthanides in rare earth minerals. While not part of the rare earth series, it resembles the heavy rare earths which are sometimes referred to as the "yttrics" for this reason. Another unique characteristic derives from its ability to form crystals with useful properties. The name yttrium originated from a Swedish village near Vaxholm called Yttbery where it was discovered.

Related Forms & Applications