Effects of annealing on the microstructural evolution and phase transition in an AlCrCuFeNi2 high-entropy alloy.

Title Effects of annealing on the microstructural evolution and phase transition in an AlCrCuFeNi2 high-entropy alloy.
Authors L. Guo; W. Wu; S. Ni; Z. Wang; M. Song
Journal Micron
DOI 10.1016/j.micron.2017.06.007
Abstract

An AlCrCuFeNi2 high entropy alloy (HEA) was prepared by arc melting, followed by annealing at different temperatures. The elemental distributions, phase formation, morphology and microstructural evolution of the HEA in both the as-cast state and annealed state were investigated. The results indicate that the HEA undergoes elements segregation, precipitation and spinodal decomposition. The as-cast alloy consists of Cr-Fe-Ni rich FCC dendritic (DR) phase and BCC interdendritic (ID) phase. Spherical Fe-Cr rich BCC precipitates were found to disperse in Al-Ni rich B2 (ordered BCC) matrix. After heat treatments, the distribution of elements clearly changes, along with changes of the constituent phase and morphology. After annealing at 600°C, the DR region remains Cr-Fe-Ni rich phase, while some spherical precipitates transform into the needle-like structure within the ID region. The L12 (ordered FCC) nanorod-shaped phase ((Ni,Cu)3Al) and plate-like Al-Ni rich phase form within the DR region when annealing up to 900°C. The L12 phase almost dissolves in the FCC matrix due to the order-disorder transition and an obvious coarsening of the Fe-Cr rich phase occurs after annealing at 1100°C. The segregation of Cu atoms at the interface between DR and ID regions is found at the as-cast state, while a uniform distribution of Cu atoms in DR and ID regions was observed after annealing at 1100°C.

Citation L. Guo; W. Wu; S. Ni; Z. Wang; M. Song.Effects of annealing on the microstructural evolution and phase transition in an AlCrCuFeNi2 high-entropy alloy.. Micron. 2017;101:6977. doi:10.1016/j.micron.2017.06.007

Related Elements

Aluminum

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

Chromium

See more Chromium products. Chromium (atomic symbol: Cr, atomic number: 24) is a Block D, Group 6, Period 4 element with an atomic weight of 51.9961. Chromium Bohr ModelThe number of electrons in each of Chromium's shells is 2, 8, 13, 1 and its electron configuration is [Ar] 3d5 4s1. Louis Nicolas Vauquelin first discovered chromium in 1797 and first isolated it the following year. The chromium atom has a radius of 128 pm and a Van der Waals radius of 189 pm. In its elemental form, chromium has a lustrous steel-gray appearance. Elemental ChromiumChromium is the hardest metallic element in the periodic table and the only element that exhibits antiferromagnetic ordering at room temperature, above which it transforms into a paramagnetic solid. The most common source of chromium is chromite ore (FeCr2O4). Due to its various colorful compounds, Chromium was named after the Greek word 'chroma.' meaning color.

Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Iron

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.

Nickel

See more Nickel products. Nickel (atomic symbol: Ni, atomic number: 28) is a Block D, Group 4, Period 4 element with an atomic weight of 58.6934. Nickel Bohr ModelThe number of electrons in each of nickel's shells is [2, 8, 16, 2] and its electron configuration is [Ar]3d8 4s2. Nickel was first discovered by Alex Constedt in 1751. The nickel atom has a radius of 124 pm and a Van der Waals radius of 184 pm. In its elemental form, nickel has a lustrous metallic silver appearance. Nickel is a hard and ductile transition metal that is considered corrosion-resistant because of its slow rate of oxidation. Elemental NickelIt is one of four elements that are ferromagnetic and is used in the production of various type of magnets for commercial use. Nickel is sometimes found free in nature but is more commonly found in ores. The bulk of mined nickel comes from laterite and magmatic sulfide ores. The name originates from the German word kupfernickel, which means "false copper" from the illusory copper color of the ore.

Related Forms & Applications