Ethylferrocene

CAS #:

Linear Formula:

C12H14Fe

MDL Number:

MFCD00059071

EC No.:

215-056-3

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(1N8) 98% Ethylferrocene
E-FEC-018-LIQ
Pricing > SDS > Data Sheet >
(2N) 99% Ethylferrocene
E-FEC-02-LIQ
Pricing > SDS > Data Sheet >

Ethylferrocene Properties (Theoretical)

Compound Formula C12H14Fe
Molecular Weight 214.08
Appearance Yellow to brown liquid
Melting Point N/A
Boiling Point 264 °C
Density 1.256 g/mL
Solubility in H2O N/A
Refractive Index 1.601
Exact Mass 214.044488
Monoisotopic Mass 214.044488

Ethylferrocene Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319H335
Hazard Codes Xi
Precautionary Statements P262-P280-P305+P351+P338-P304+P340-P403+P233-P501
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/24/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Ethylferrocene

Product Number: All applicable American Elements product codes, e.g. E-FEC-02-LIQ , E-FEC-018-LIQ

CAS #: 1273-89-8

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.

Exclamation Mark - GHS07

Signal word:
Warning

Hazard-determining components of labeling:
Ethylferrocene, 98%

Hazard statements:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary statements:
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.

NFPA ratings (scale 0 - 4):
Health = 1
Fire = 0
Reactivity = 0

HMIS-ratings (scale 0 - 4):
Health = 1
Fire = 0
Reactivity = 0

Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

CAS No. / Description
1273-89-8 / Ethylferrocene, 98%

EC number: 215-056-3


SECTION 4. FIRST AID MEASURES

After inhalation:
In case of unconsciousness place patient stably in side position for transportation.

After skin contact:
Immediately wash with water and soap and rinse thoroughly.

After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing:
If symptoms persist consult doctor.

Information for doctor:
Most important symptoms and effects, both acute and delayed:
No further relevant information available.

Indication of any immediate medical attention and special treatment needed:
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Special hazards arising from the substance or mixture:
No further relevant information available.

Advice for firefighters
Protective equipment: No special measures required


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures:
Not required.

Environmental precautions:
No special measures required.

Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.


SECTION 7. HANDLING AND STORAGE

Handling:
Precautions for safe handling: No special precautions are necessary if used correctly.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities

Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep receptacle tightly sealed.
Specific end use(s) No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters:
Components with limit values that require monitoring at the workplace: Not required.
Additional information: The lists that were valid during the creation were used as basis.

Exposure controls:
Personal protective equipment:

General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

Protection of hands: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eye protection:
Tightly sealed goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Form: Liquid
Color: Red
Odor: Odorless
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range: no data °C
Boiling point/Boiling range: no data °C
Flash point: Not applicable.
Flammability (solid, gaseous): Not determined.
Ignition temperature:
Decomposition temperature: Not determined.
Auto igniting: Not determined.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: no data hPa
Density at 20 °C (68 °F): 1.256 g/cm³ (10.481 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl


SECTION 10. STABILITY AND REACTIVITY

Reactivity No further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.

Carcinogenic categories
IARC (International Agency for Research on Cancer):
Substance is not listed.

NTP (National Toxicology Program):
Substance is not listed.

OSHA-Ca (Occupational Safety & Health Administration):
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

Aquatic toxicity: No further relevant information available.

Persistence and degradability No further relevant information available.

Behavior in environmental systems:

Bioaccumulative potential No further relevant information available.

Mobility in soil No further relevant information available.

Additional ecological information:

General notes: Not known to be hazardous to water.

Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.

Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.

Uncleaned packagings:

Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number:
DOT, ADN, IMDG, IATA not regulated

UN proper shipping name:
DOT, ADN, IMDG, IATA not regulated

Transport hazard class(es):
DOT, ADN, IMDG, IATA
Class not regulated

Packing group
DOT, IMDG, IATA not regulated

Environmental hazards:
Marine pollutant: No

Special precautions for user Not applicable.

Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.

UN "Model Regulation": not regulated


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is not listed.

Section 313 (Specific toxic chemical listings):
Substance is not listed.

TSCA (Toxic Substances Control Act):
Substance is listed
Proposition 65

Chemicals known to cause cancer:
Substance is not listed.

Chemicals known to cause reproductive toxicity for females:
Substance is not listed.

Chemicals known to cause reproductive toxicity for males:
Substance is not listed.

Chemicals known to cause developmental toxicity:
Substance is not listed

Carcinogenic categories
EPA (Environmental Protection Agency)
Substance is not listed.

TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.

NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Ethylferrocene

Ethylferrocene is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Ethylferrocene Synonyms

Ethyl-ferrocene, Ethyl ferrocene, Iron(2+) 2, 4-cyclopentadienide 1-ethyl-2, 4-cyclopentadienide (1:1:1); cyclopenta-1, 3-diene; 5-ethylcyclopenta-1, 3-diene; iron(2+)

Chemical Identifiers

Linear Formula C12H14Fe
MDL Number MFCD00059071
EC No. 215-056-3
Pubchem CID 9288
IUPAC Name cyclopenta-1,3-diene; 5-ethylcyclopenta-1,3-diene; iron(2+)
SMILES CC[C-]1C=CC=C1.[CH-]1C=CC=C1.[Fe+2]
InchI Identifier InChI=1S/C7H9.C5H5.Fe/c1-2-7-5-3-4-6-7;1-2-4-5-3-1;/h3-6H,2H2,1H3;1-5H;/q2*-1;+2
InchI Key FCNXGBYXGSKCDG-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Iron

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.

Recent Research

TODAY'S TOP DISCOVERY!

November 24, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions