Facile fabrication of CuS/Carbon composites using lignosulfonate for efficient palladium recovery under strong acidic conditions.

Title Facile fabrication of CuS/Carbon composites using lignosulfonate for efficient palladium recovery under strong acidic conditions.
Authors H. Liu; Q. da An; J. Kim; L. Guo; Y.M. Zhao; Z.Y. Xiao; S.R. Zhai
Journal J Hazard Mater
DOI 10.1016/j.jhazmat.2020.122253
Abstract

The recovery of noble metals from aqueous systems is of great significance for constructing sustainable framework of modern industry yet remains challenging. Herein, CuS/Carbon composites with superior thermal stability and adsorption capacity were successfully synthesized via one-pot hydrothermal method using lignosulfonate as dual role of raw materials. The optimal synthesis conditions were investigated via tailoring the temperature and the mass ratio of reagents. The morphologies and physical properties of the composites were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The surface chemistry was analyzed by Zeta potential analysis, Brunauer-Emmet-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The Langmuir model and the pseudo-second-order model well described the adsorption of Pd(II) and Pd(IV) delivered by fabricated composites. The adsorption capacity obtained from Langmuir isotherm model towards Pd(IV) was 114?mg/g and Pd(II) was 101?mg/g, respectively. More importantly, the adsorbed palladium species could be desorbed with hydrochloric acid and thiourea, which suggested good durability and recycling performance of the typical composite. This work might provide a new guidance for the utilization of lignin or its derivatives and enriched the research in the field of noble metal recovery.

Citation H. Liu; Q. da An; J. Kim; L. Guo; Y.M. Zhao; Z.Y. Xiao; S.R. Zhai.Facile fabrication of CuS/Carbon composites using lignosulfonate for efficient palladium recovery under strong acidic conditions.. J Hazard Mater. 2020;391:122253. doi:10.1016/j.jhazmat.2020.122253

Related Elements

Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Palladium

Palladium Bohr ModelSee more Palladium products. Palladium (atomic symbol: Pd, atomic number: 46) is a Block D, Group 10, Period 5 element with an atomic weight of 106.42. The number of electrons in each of palladium's shells is 2, 8, 18, 18 and its electron configuration is [Kr] 4d10. The palladium atom has a radius of 137 pm and a Van der Waals radius of 202 pm. In its elemental form, palladium has a silvery white appearance. Palladium is a member of the platinum group of metals (along with platinum, rhodium, ruthenium, iridium and osmium). Elemental PalladiumPalladium has the lowest melting point and is the least dense of the group. Palladium can be found as a free metal and alloyed with other platinum-group metals. Nickel-copper deposits are the main commercial source of palladium. Palladium was discovered and first isolated by William Hyde Wollaston in 1803. Its name is derived from the asteroid Pallas.

Sulfur

See more Sulfur products. Sulfur (or Sulphur) (atomic symbol: S, atomic number: 16) is a Block P, Group 16, Period 3 element with an atomic radius of 32.066. Sulfur Bohr ModelThe number of electrons in each of Sulfur's shells is 2, 8, 6 and its electron configuration is [Ne] 3s2 3p4. In its elemental form, sulfur has a light yellow appearance. The sulfur atom has a covalent radius of 105 pm and a Van der Waals radius of 180 pm. In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, and epsom salts. Sulfur has been known since ancient times but was not accepted as an element until 1777, when Antoine Lavoisier helped to convince the scientific community that it was an element and not a compound.

Related Forms & Applications