View the history of American Elements on Wikipedia

Gallium(II) Sulfide Sputtering Target

CAS #:

12024-10-1

Linear Formula:

GaS

MDL Number:

N/A

EC No.:

234-688-0

View the history of American Elements on Wikipedia

ORDER

PRODUCT	Product Code	ORDER	SAFETY DATA	TECHNICAL DATA
(2N) 99% Gallium(II) Sulfide Sputtering Target	GA2-S-02-ST	Pricing >	SDS >	Data Sheet >
(2N5) 99.5% Gallium(II) Sulfide Sputtering Target	GA2-S-025-ST	Pricing >	SDS >	Data Sheet >
(3N) 99.9% Gallium(II) Sulfide Sputtering Target	GA2-S-03-ST	Pricing >	SDS >	Data Sheet >
(3N5) 99.95% Gallium(II) Sulfide Sputtering Target	GA2-S-035-ST	Pricing >	SDS >	Data Sheet >
(4N) 99.99% Gallium(II) Sulfide Sputtering Target	GA2-S-04-ST	Pricing >	SDS >	Data Sheet >
(5N) 99.999% Gallium(II) Sulfide Sputtering Target	GA2-S-05-ST	Pricing >	SDS >	Data Sheet >

Question? Ask an American Elements Materials Science Engineer

Gallium(II) Sulfide Sputtering Target Properties (Theoretical)

Compound Formula	GaS
Molecular Weight	101.79
Appearance	Yellow crystals
Melting Point	965 °C, 1238 K, 1769 °F
Boiling Point	N/A
Density	3.86 g/cm³
Solubility in H2O	N/A
Exact Mass	N/A
Monoisotopic Mass	N/A

Gallium(II) Sulfide Sputtering Target Health & Safety Information

Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

View and Print SDS

Print to PDF

SAFETY DATA SHEET

Date Accessed: 12/30/2024

Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Gallium(II) Sulfide Sputtering Target

Product Number: All applicable American Elements product codes, e.g. GA2-S-02-ST , GA2-S-025-ST , GA2-S-03-ST , GA2-S-035-ST , GA2-S-04-ST , GA2-S-05-ST

CAS #: 12024-10-1

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887

SECTION 2. HAZARDS IDENTIFICATION

Signal Word: Danger

Hazard Statements:
H314: Causes severe skin burns and eye damage
Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
P405: Store locked up
P501: Dispose of contents/container in accordance with
local/regional/national/international regulations
HMIS
Health Ratings (0-4):
Health: 3
Flammability: 0
Physical: 1

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Family:Ceramic
Additional Names:
Gallium(II) sulfide, Gallium monosulfide
Gallium sulfide(GaS):
Percentage: 100 wt%
CAS#: 12024-10-1
EC #: 234-688-0

SECTION 4. FIRST AID MEASURES

General Treatment:
Seek medical attention if symptoms persist.
Special Treatment: None
Important Symptoms:
Causes severe skin burns.
Causes serious eye damage.
Inhalation:
Remove victim to fresh air. Supply oxygen if breathing is difficult.
Ingestion:
Give one to two glasses of water and induce vomiting.
Never induce vomiting or give anything by mouth to an unconscious person.
Skin:
Wash affected area with mild soap and water. Remove any contaminated clothing.
Eyes:
Flush eyes with water, blinking often for several minutes.
Remove contact lenses if present and easy to do. Continue rinsing

SECTION 5. FIREFIGHTING MEASURES

Flammability:
Non-flammable
Extinguishing Media:
Do not use water. Use extinguishing powder.
Spec. Fire Fighting Procedure:
Use full-face, self-contained breathing apparatus with full protective clothing to prevent contact with skin and eyes.
See section 10 for decomposition products.

SECTION 6. ACCIDENTAL RELEASE MEASURES

If Material Is Released/
Spilled:
Wear appropriate respiratory and protective equipment specified in special protection information. Isolate spill area and provide ventilation. Vacuum up spill using a high efficiency particulate absolute (HEPA) air filter and place in a closed container for disposal.
Take care not to raise dust.
Environmental Precautions:
Isolate runoff to prevent environmental pollution.

SECTION 7. HANDLING AND STORAGE

Handling Conditions:
Handle under protective gas.
Wash thoroughly after handling.
Storage Conditions:
Store in a cool dry place in a tightly sealed container.
Store under dry inert gas.
Store apart from materials and conditions listed in section 10.
Work/Hygienic
Maintenance:
Do not use tobacco or food in work area. Wash thoroughly before eating and smoking. Do not blow dust off clothing or skin with compressed air.
Ventilation:
Provide sufficient ventilation to maintain concentration at or below threshold limit.

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Permissible Exposure Limits: N/A
Threshold Limit Value: N/A
SpecialEquipment: None
Respiratory Protection: Dust Respirator
Protective Gloves: Rubber gloves
Eye Protection:
Safety glasses or goggles, full face protection
Body Protection:
Protective work clothing. Wear close-toed shoes and long sleeves/pants.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Color: Yellow
Form: Powder
Odor: Odorless
Water Solubility: Reacts
Boiling Point: N/A
Melting Point: 965°C
Flash Point: N/A
Autoignition Temperature: N/A
Density: 3.87 g/cc
Molecular weight: 101.78 g/mol

SECTION 10. STABILITY AND REACTIVITY

Stability:
Stable under recommended storage conditions
Reacts With:
Acids, Water/moisture,
Oxidizing agents
Incompatible Conditions:
Water/moisture
Hazardous
Decomposition
Products:
Sulfur dioxide, Hydrogen sulfide, Sulfur oxides,
Metal oxide fume

SECTION 11. TOXICOLOGICAL INFORMATION

Potential Health Effects:
Eyes: Causes severe eye damage.
Skin: Causes severe skin burns.
Ingestion:
a strong corrosive effect on mouth and throat to the danger of perforation of esophagus and stomach.
Inhalation: May cause irritation
Chronic:
Gallium and gallium compo9unds may cause metallic taste, dermatitis and depression of the bone marrow function. Large doses may cause hemorrhagic nephritis.
Signs & Symptoms: N/A
Aggravated Medical Conditions: N/A
Median Lethal Dose: N/A
Carcinogen: N/A

SECTION 12. ECOLOGICAL INFORMATION

Aquatic Toxicity: Low
Persistent Bioaccumulation Toxicity: No
Very Persistent, Very Bioaccumulative: No
Notes: N/A

SECTION 13. DISPOSAL CONSIDERATIONS

Dispose of in accordance with local, state, national, and international regulations.

SECTION 14. TRANSPORT INFORMATION

Hazardous:
Hazardous for transportation.
Hazard Class:
8 Corrosive substances.
Packing Group: II
UN Number: UN3260
Proper Shipping Name:
Corrosive solid, acidic, inorganic, n.o.s. (Gallium sulfide)

SECTION 15. REGULATORY INFORMATION

Sec 302 Extremely Hazardous: No
Sec 304 Reportable Quantities: N/A
Sec 313 Toxic Chemicals: No

SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

Print this page

About Gallium(II) Sulfide Sputtering Target

American Elements specializes in producing high purity Gallium(II) Sulfide Sputtering Targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation.

Gallium(II) Sulfide Sputtering Target Synonyms

N/A

Chemical Identifiers

Linear Formula	GaS
MDL Number	N/A
EC No.	234-688-0
Beilstein/Reaxys No.	N/A
Pubchem CID	25113419
IUPAC Name	gallium sulfide
SMILES	[Ga+3].[Ga+3].[S-2].[S-2].[S-2]
InchI Identifier	InChI=1S/2Ga.3S/q2+3;3-2
InchI Key	BVSHTEBQPBBCFT-UHFFFAOYSA-N

Customers For Gallium(II) Sulfide Sputtering Target Have Also Viewed

Silver Gallium Sulfide Sputtering Target	Gallium(II) Sulfide	Gallium(III) Sulfide Sputtering Target
Sulfur-doped Gallium Phosphide Sputtering Target	Gallium Sulfide Selenide GaSSe Crystal	Gallium Sulfide Telluride GaSTe Crystal
Thallium Gallium Sulfide TlGaS2 Crystal	GaPS4 Crystal	In2GaBi2S6 Crystal

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

Gallium

31 Ga 69.723000000 Gallium

See more Gallium products. Gallium (atomic symbol: Ga, atomic number: 31) is a Block P, Group 13, Period 4 element with an atomic weight of 69.723.The number of electrons in each of Gallium's shells is 2, 8, 18, 3 and its electron configuration is [Ar] 3d¹⁰ 4s² 4p¹. The gallium atom has a radius of 122.1 pm and a Van der Waals radius of 187 pm. Gallium Bohr Model Gallium was predicted by Dmitri Mendeleev in 1871. It was first discovered and isolated by Lecoq de Boisbaudran in 1875. In its elemental form, gallium has a silvery appearance. Elemental Gallium Gallium is one of three elements that occur naturally as a liquid at room temperature, the other two being mercury and cesium. Gallium does not exist as a free element in nature and is sourced commercially from bauxite and sphalerite. Currently, gallium is used in semiconductor devices for microelectronics and optics. The element name originates from the Latin word 'Gallia' referring to Gaul, the old name of France.

Sulfur

16 S 32.065000000 Sulfur

See more Sulfur products. Sulfur (or Sulphur) (atomic symbol: S, atomic number: 16) is a Block P, Group 16, Period 3 element with an atomic radius of 32.066. Sulfur Bohr Model The number of electrons in each of Sulfur's shells is 2, 8, 6 and its electron configuration is [Ne] 3s² 3p⁴. In its elemental form, sulfur has a light yellow appearance. The sulfur atom has a covalent radius of 105 pm and a Van der Waals radius of 180 pm. In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, and epsom salts. Sulfur has been known since ancient times but was not accepted as an element until 1777, when Antoine Lavoisier helped to convince the scientific community that it was an element and not a compound.