Indium Phosphate

CAS #:

Linear Formula:

InPO4

MDL Number:

MFCD00016154

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Indium Phosphate
IN-PAT-02
Pricing > SDS > Data Sheet >
(3N) 99.9% Indium Phosphate
IN-PAT-03
Pricing > SDS > Data Sheet >
(4N) 99.99% Indium Phosphate
IN-PAT-04
Pricing > SDS > Data Sheet >
(5N) 99.999% Indium Phosphate
IN-PAT-05
Pricing > SDS > Data Sheet >

Indium Phosphate Properties (Theoretical)

Compound Formula InO4P
Molecular Weight 209.79
Appearance Powder
Melting Point N/A
Boiling Point 158 °C
Density 4.9 g/cm3
Solubility in H2O N/A
Exact Mass 209.857298
Monoisotopic Mass 209.8573

Indium Phosphate Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319
Hazard Codes Xi
Precautionary Statements P264-P280-P302+P352-P305+P351+P338-P321-P332+P313-P337+P313-P362
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/24/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Indium Phosphate

Product Number: All applicable American Elements product codes, e.g. IN-PAT-02 , IN-PAT-03 , IN-PAT-04 , IN-PAT-05

CAS #: 14693-82-4

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Skin Corrosion/Irritation Category 2
Serious Eye Damage/Eye Irritation Category 2
Specific target organ toxicity (single exposure) Target Organs - Respiratory system. Category 3
Label Elements
Signal Word
Warning
Hazard Statements
Causes skin irritation
Causes serious eye irritation
May cause respiratory irritation

Exclamation Mark - GHS07

Precautionary Statements
Prevention
Wash face, hands and any exposed skin thoroughly after handling
Wear protective gloves/protective clothing/eye protection/face protection
Avoid breathing dust/fume/gas/mist/vapors/spray
Use only outdoors or in a well-ventilated area
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Call a POISON CENTER or doctor/physician if you feel unwell
Skin
IF ON SKIN: Wash with plenty of soap and water
If skin irritation occurs: Get medical advice/attention
Take off contaminated clothing and wash before reuse
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
If eye irritation persists: Get medical advice/attention
Storage
Store in a well-ventilated place. Keep container tightly closed
Store locked up
Disposal
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC)
None identified


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Component / CAS-No / Weight %:
Indium(III) phosphate / 14693-82-4 / <=100


SECTION 4. FIRST AID MEASURES

General Advice
If symptoms persist, call a physician.
Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Skin Contact
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Ingestion
Clean mouth with water and drink afterwards plenty of water. Get medical attention if
symptoms occur.
Most important symptoms and effects
None reasonably foreseeable.
Notes to Physician
Treat symptomatically


SECTION 5. FIREFIGHTING MEASURES

Unsuitable Extinguishing Media No information available
Flash Point No information available
Method - No information available
Autoignition Temperature No information available
Explosion Limits
Upper No data available
Lower No data available
Sensitivity to Mechanical Impact No information available
Sensitivity to Static Discharge No information available
Specific Hazards Arising from the Chemical
Keep product and empty container away from heat and sources of ignition. Hazardous Combustion Products
None known.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
NFPA:
Health
2
Flammability
0
Instability
0
Physical hazards
-


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Precautions
Ensure adequate ventilation. Use personal protective equipment as required. Avoid dust formation.
Environmental Precautions
Should not be released into the environment. See Section 12 for additional Ecological Information.
Methods for Containment and Clean Up
Sweep up and shovel into suitable containers for disposal. Keep in suitable, closed
containers for disposal.


SECTION 7. HANDLING AND STORAGE

Handling
Wear personal protective equipment/face protection. Ensure adequate ventilation. Do not
get in eyes, on skin, or on clothing. Avoid ingestion and inhalation. Avoid dust formation.
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Guidelines
This product does not contain any hazardous materials with occupational exposure
limits established by the region specific regulatory bodies.
Engineering Measures
Ensure that eyewash stations and safety showers are close to the workstation location.
Personal Protective Equipment
Eye/face Protection Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin and body protection
Wear appropriate protective gloves and clothing to prevent skin exposure.
Respiratory Protection
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard
EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Physical State Solid Crystalline
Appearance White
Odor No information available
Odor Threshold No information available
pH No information available
Melting Point/Range No data available
Boiling Point/Range No information available
Flash Point No information available
Evaporation Rate Not applicable
Flammability (solid,gas) No information available
Flammability or explosive limits
Upper No data available
Lower No data available
Vapor Pressure No information available
Vapor Density Not applicable
Specific Gravity 4.9 g/cm3
Solubility No information available
Partition coefficient; n-octanol/water No data available
Autoignition Temperature No information available
Decomposition Temperature No information available
Viscosity Not applicable
Molecular Formula InPO4
Molecular Weight 209.79


SECTION 10. STABILITY AND REACTIVITY

Reactive Hazard
None known, based on information available
Stability
Stable under normal conditions. Conditions to Avoid Incompatible products.
Incompatible Materials
Strong oxidizing agents
Hazardous Decomposition Products
None under normal use conditions
Hazardous Polymerization
Hazardous polymerization does not occur. Hazardous Reactions None under normal processing.


SECTION 11. TOXICOLOGICAL INFORMATION

Acute Toxicity
Product Information
Component Information
Toxicologically Synergistic
Products
No information available
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Irritation No information available
Sensitization No information available
Mutagenic Effects No information available
Reproductive Effects No information available. Developmental Effects No information available. Teratogenicity No information available. STOT - single exposure Respiratory system
STOT - repeated exposure None known
Aspiration hazard No information available
Symptoms / effects,both acute and
delayed
No information available
Endocrine Disruptor Information No information available
Other Adverse Effects The toxicological properties have not been fully investigated.


SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity
Do not empty into drains.
Persistence and Degradability Insoluble in water
Bioaccumulation/ Accumulation No information available.
Mobility Is not likely mobile in the environment due its low water solubility.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste Disposal Methods
Chemical waste generators must determine whether a discarded chemical is classified as a
hazardous waste. Chemical waste generators must also consult local, regional, and
national hazardous waste regulations to ensure complete and accurate classification.


SECTION 14. TRANSPORT INFORMATION

DOT Not regulated
TDG Not regulated
IATA Not regulated
IMDG/IMO Not regulated


SECTION 15. REGULATORY INFORMATION

U.S. Federal Regulations
SARA 313 Not applicable
SARA 311/312 Hazard Categories See section 2 for more information
CWA (Clean Water Act) Not applicable
Clean Air Act Not applicable
OSHA - Occupational Safety and
Health Administration
Not applicable
CERCLA Not applicable
California Proposition 65 This product does not contain any Proposition 65 chemicals. U.S. State Right-to-Know
Regulations
Not applicable
U.S. Department of Transportation
Reportable Quantity (RQ): N
DOT Marine Pollutant N
DOT Severe Marine Pollutant N
U.S. Department of Homeland
Security
This product does not contain any DHS chemicals. Other International Regulations
Mexico - Grade No information available


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Indium Phosphate

High purity Indium PhosphateIndium Phosphate is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Indium Phosphate Synonyms

Indium(III) Phosphate

Chemical Identifiers

Linear Formula InPO4
MDL Number MFCD00016154
EC No. N/A
Beilstein/Reaxys No. N/A
Pubchem CID 9815692
IUPAC Name indium(3+); phosphate
SMILES [In+3].[O-]P([O-])([O-])=O
InchI Identifier InChI=1S/In.H3O4P/c;1-5(2,3)4/h;(H3,1,2,3,4)/q+3;/p-3
InchI Key UJXZVRRCKFUQKG-UHFFFAOYSA-K

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Indium

See more Indium products. Indium (atomic symbol: In, atomic number: 49) is a Block P, Group 13, Period 5 element with an atomic weight of 114.818. The number of electrons in each of indium's shells is [2, 8, 18, 18, 3] and its electron configuration is [Kr] 4d10 5s2 5p1. The indium atom has a radius of 162.6 pm and a Van der Waals radius of 193 pm. Indium was discovered by Ferdinand Reich and Hieronymous Theodor Richter in 1863. Indium Bohr ModelIt is a relatively rare, extremely soft metal is a lustrous silvery gray and is both malleable and easily fusible. It has similar chemical properties to Elemental Indiumgallium such as a low melting point and the ability to wet glass. Fields such as optics and microelectronics that utilize semiconductor technology have wide uses for indium, especially in the form of Indiun Tin Oxide (ITO). Thin films of Copper Indium Gallium Selenide (CIGS) are used in high-performing solar cells. Indium's name is derived from the Latin word indicum, meaning violet.

Phosphorus

Phosphorus Bohr ModelSee more Phosphorus products. Phosphorus (atomic symbol: P, atomic number: 15) is a Block P, Group 15, Period 3 element. The number of electrons in each of Phosphorus's shells is 2, 8, 5 and its electronic configuration is [Ne] 3s2 3p3. The phosphorus atom has a radius of 110.5.pm and its Van der Waals radius is 180.pm. Phosphorus is a highly-reactive non-metallic element (sometimes considered a metalloid) with two primary allotropes, white phosphorus and red phosphorus its black flaky appearance is similar to graphitic carbon. Compound forms of phosphorus include phosphates and phosphides. Phosphorous was first recognized as an element by Hennig Brand in 1669 its name (phosphorus mirabilis, or "bearer of light") was inspired from the brilliant glow emitted by its distillation.

TODAY'S TOP DISCOVERY!

November 24, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions