Lead tin sulfide (Pb1-xSnxS) nanocrystals: A potential solar absorber material.

Title Lead tin sulfide (Pb1-xSnxS) nanocrystals: A potential solar absorber material.
Authors Y.C. Zeng; S.F. Sie; N. Suriyawong; B.Asefa Aragaw; J. Bin Shi; M.W. Lee
Journal J Colloid Interface Sci
DOI 10.1016/j.jcis.2016.11.005
Abstract

We present a new ternary semiconductor absorber material - Pb1-xSnxS - for solar cells. Pb1-xSnxS nanocrystals (NCs) were synthesized using the successive ionic layer adsorption reaction (SILAR) process. Energy-dispersive X-ray spectroscopy revealed the Sn ratio for a sample prepared with five SILAR cycles to be x=0.55 (i.e. non-stoichiometric formula Pb0.45Sn0.55S). The optical spectra revealed that the energy gap Eg of the Pb1-xSnxS NCs decreased with an increasing number of SILAR cycles n, with Eg=1.67eV for the sample with n=5. Liquid-junction Pb1-xSnxS quantum dot-sensitized solar cells were fabricated using the polysulfide electrolyte. The best cell yielded a short-circuit current density Jsc of 10.1mA/cm(2), an open circuit voltage of 0.43V, a fill factor FF of 50% and an efficiency of 2.17% under 1 sun. The external quantum efficiency spectrum (EQE) covered a spectral range of 300-800nm with a maximum EQE of ?67% at ?=650nm. At the reduced light of 0.1 sun, the efficiency increased to 3.31% (with a normalized Jsc=17.7mA/cm(2)) - a respectable efficiency for a new sensitizer. This work demonstrates that Pb1-xSnxS shows potential as a solar cell absorber.

Citation Y.C. Zeng; S.F. Sie; N. Suriyawong; B.Asefa Aragaw; J. Bin Shi; M.W. Lee.Lead tin sulfide (Pb1-xSnxS) nanocrystals: A potential solar absorber material.. J Colloid Interface Sci. 2017;488:246250. doi:10.1016/j.jcis.2016.11.005

Related Elements

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

Lead

Lead Bohr ModelSee more Lead products. Lead (atomic symbol: Pb, atomic number: 82) is a Block P, Group 14, Period 6 element with an atomic radius of 207.2. The number of electrons in each of Lead's shells is [2, 8, 18, 32, 18, 4] and its electron configuration is [Xe] 4f14 5d10 6s2 6p2. The lead atom has a radius of 175 pm and a Van der Waals radius of 202 pm. In its elemental form, lead has a metallic gray appearance. Lead occurs naturally as a mixture of four stable isotopes: 204Pb (1.48%), 206Pb (23.6%), 207Pb (22.6%), and 208Pb (52.3%). Elemental LeadLead is obtained mainly from galena (PbS) by a roasting process. Anglesite, cerussite, and minim are other common lead containing minerals. Lead does occur as a free element in nature, but it is rare. It is a dense, soft metal that is very resistant to corrosion and poorly conductive compared to other metals. Its density and low melting point make it useful in applications such as electrolysis and industrial materials.

Sulfur

See more Sulfur products. Sulfur (or Sulphur) (atomic symbol: S, atomic number: 16) is a Block P, Group 16, Period 3 element with an atomic radius of 32.066. Sulfur Bohr ModelThe number of electrons in each of Sulfur's shells is 2, 8, 6 and its electron configuration is [Ne] 3s2 3p4. In its elemental form, sulfur has a light yellow appearance. The sulfur atom has a covalent radius of 105 pm and a Van der Waals radius of 180 pm. In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, and epsom salts. Sulfur has been known since ancient times but was not accepted as an element until 1777, when Antoine Lavoisier helped to convince the scientific community that it was an element and not a compound.

Related Forms & Applications