Lithium Selenide

CAS #:

Linear Formula:

Li2Se

MDL Number:

N/A

EC No.:

235-230-2

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(5N) 99.999% Lithium Selenide Ingot
LI-SE-05-I
Pricing > SDS > Data Sheet >
(5N) 99.999% Lithium Selenide Lump
LI-SE-05-L
Pricing > SDS > Data Sheet >
(5N) 99.999% Lithium Selenide Powder
LI-SE-05-P
Pricing > SDS > Data Sheet >
(5N) 99.999% Lithium Selenide Sputtering Target
LI-SE-05-ST
Pricing > SDS > Data Sheet >

Lithium Selenide Properties (Theoretical)

Compound Formula Li2Se
Molecular Weight 92.842
Appearance solid
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 93.94853
Monoisotopic Mass 93.948532 Da

Lithium Selenide Health & Safety Information

Signal Word Danger
Hazard Statements H261-H301+H331-H373-H410
Hazard Codes F, T, N
Precautionary Statements P223-P231+P232-P260-P264-P270-P271-P273-P280-P301+P310-P304+P340-P314
Risk Codes N/A
Safety Statements N/A
Transport Information UN 3134 4.3(6.1)/ PG II
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/21/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Lithium Selenide

Product Number: All applicable American Elements product codes, e.g. LI-SE-05-I , LI-SE-05-L , LI-SE-05-P , LI-SE-05-ST

CAS #: 12136-60-6

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Signal Word: Danger

Flame - GHS02 Skull and Crossbones - GHS06 Health Hazard - GHS08 Environment - GHS09

Hazard Statements: H261 In contact with water releases flammable gases
H301 + H331 Toxic if swallowed or if inhaled
H373 May cause damage to organs through prolonged or repeated exposure
H410 Very toxic to aquatic life with long lasting effects
Precautionary Statements: P223 Keep away from any possible contact with water, because of violent reaction and possible flash fire.
P231 + P232 Handle under inert gas. Protect from moisture
P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P314 Get medical advice/ attention if you feel unwell


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Family: Ceramic
Additional Names: Dilithium Selenide, Lithium selenidolithium
Lithium Selenide (Li2Se):
Percentage: 100 wt%
CAS #: 12136-60-6
EC #: 235-230-2


SECTION 4. FIRST AID MEASURES

General Treatment: Seek medical attention if symptoms persist.
Special Treatment: None
Important Symptoms: None
Inhalation: Remove victim to fresh air. Supply oxygen if breathing is difficult.
Ingestion: Never induce vomiting or give anything by mouth to an unconscious person.
Skin: Wash affected area with mild soap and water. Remove any contaminated clothing. Seek immediate medical attention.
Eyes: Flush eyes with water, blinking often for several minutes. Remove contact lenses if present and easy to do. Continue rinsing


SECTION 5. FIREFIGHTING MEASURES

Flammability: Flammable in contact with water
Extinguishing Media: Do not use water – use CO2, sand, extinguishing powder.
Spec. Fire Fighting Procedure: Use full-face, self-contained breathing apparatus with full protective clothing to prevent contact with skin and eyes. See section 10 for decomposition products.


SECTION 6. ACCIDENTAL RELEASE MEASURES

If Material Is Released/Spilled: Wear appropriate respiratory and protective equipment specified in special protection information. Isolate spill area and provide ventilation. Vacuum up spill using a high efficiency particulate absolute (HEPA) air filter and place in a closed container for disposal. Take care not to raise dust.
Environmental Precautions: Isolate runoff to prevent environmental pollution.


SECTION 7. HANDLING AND STORAGE

Handling Conditions: Wash thoroughly after handling.
Storage Conditions: Store in a cool dry place in a tightly sealed container. Store apart from materials and conditions listed in section 10.
Work/Hygienic Maintenance: Do not use tobacco or food in work area. Wash thoroughly before eating and smoking. Do not blow dust off clothing or skin with compressed air.
Ventilation: Provide sufficient ventilation to maintain concentration at or below threshold limit.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Permissible Exposure Limits: 0.2 mg/m3 as Li2Se, long-term value
Threshold Limit Value: 0.2 mg/m3 as Li2Se, long-term value
Special Equipment: None
Respiratory Protection: Use a respirator with type P100 (USA) or P3 (EN143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.
Protective Gloves: Rubber gloves
Eye Protection: Safety glasses or goggles, Full face protection
Body Protection: Protective work clothing. Wear close-toed shoes and long sleeves/pants.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Color Brown
Form: Powder, Granules, Pellets, Sputtering target, Custom parts
Odor: N/A
Water Solubility: N/A
Boiling Point: N/A
Melting Point: N/A
Flash Point: N/A
Autoignition Temperature: N/A
Density: N/A
Molecular weight: 92.842 g/mol


SECTION 10. STABILITY AND REACTIVITY

Stability: Stable under recommended storage conditions
Reacts With: Water, Oxidizing agents
Incompatible Conditions: Moisture
Hazardous Decomposition Products: Metal oxide fume


SECTION 11. TOXICOLOGICAL INFORMATION

Potential Health Effects:
Eyes: Causes irritation
Skin: Causes irritation
Ingestion: Toxic
Inhalation: Toxic
Chronic: May cause damage to organs through prolonged or repeated exposure
Signs & Symptoms: N/A
Aggravated Medical Conditions: N/A
Median Lethal Dose: N/A
Carcinogen: N/A


SECTION 12. ECOLOGICAL INFORMATION

Aquatic Toxicity: High
Persistent Bioaccumulation Toxicity: No
Very Persistent, Very Bioaccumulative: No
Notes: Very toxic for aquatic organism.
May cause long lasting harmful effect on aquatic life.
Do not allow material to be released to the environment without proper governmental permits.
Do not allow product to reach any water sources.
Danger to drinking water if even extremely small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Do not allow undiluted product or large quantities to reach ground water, water course or sewage system.
Avoid transfer into the environment.
Toxic to aquatic life.


SECTION 13. DISPOSAL CONSIDERATIONS

Dispose of in accordance with local, state, national, and international regulations.


SECTION 14. TRANSPORT INFORMATION

Hazard Class: 4.3 Substances which, in contact with water, emit flammable gases
Secondary Class: 6.1 Toxic substances
Packing Group: PG II
UN Number: UN3134
Proper Shipping Name: Water-reactive solid, toxic, n.o.s. (Lithium Selenide)


SECTION 15. REGULATORY INFORMATION

Sec 302 Extremely Hazardous: No
Sec 304 Reportable Quantities: N/A
Sec 313 Toxic Chemicals: Yes


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Lithium Selenide

Lithium Selenide (LiSe) is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Lithium Selenide Synonyms

Dilithium selenide; lithium selenidolithium

Chemical Identifiers

Linear Formula Li2Se
MDL Number N/A
EC No. 235-230-2
Beilstein/Reaxys No. N/A
Pubchem CID 82935
IUPAC Name lithium selenidolithium
SMILES [Li][Se][Li]
InchI Identifier InChI=1S/2Li.Se
InchI Key PEXNRZDEKZDXPZ-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Lithium

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.

Selenium

Selenium Bohr ModelSee more Selenium products. Selenium (atomic symbol: Se, atomic number: 34) is a Block P, Group 16, Period 4 element with an atomic radius of 78.96. The number of electrons in each of Selenium's shells is 2, 8, 18, 6 and its electron configuration is [Ar] 3d10 4s2 4p4. The selenium atom has a radius of 120 pm and a Van der Waals radius of 190 pm. Selenium is a non-metal with several allotropes: a black, vitreous form with an irregular crystal structure three red-colored forms with monoclinic crystal structures and a gray form with a hexagonal crystal structure, the most stable and dense form of the element. Elemental SeleniumOne of the most common uses for selenium is in glass production the red tint that it lends to glass neutralizes green or yellow tints from impurities in the glass materials. Selenium was discovered and first isolated by Jöns Jakob Berzelius and Johann Gottlieb Gahn in 1817. The origin of the name Selenium comes from the Greek word "Selênê," meaning moon.

TODAY'S TOP DISCOVERY!

November 21, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions