Meldola’s Blue

8-Dimethylamino-2,3-benzophenoxazine Hemi(zinc Chloride) Salt

CAS #:

Linear Formula:

C18H15ClN2O•0.5Cl2Zn

MDL Number:

MFCD00012113

EC No.:

230-338-6

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
8-Dimethylamino-2,3-benzophenoxazine Hemi(zinc Chloride) Salt
ZN-OMX-01-P
Pricing > SDS > Data Sheet >

Meldola’s Blue Properties (Theoretical)

Compound Formula C18H15Cl3N2OZn
Molecular Weight 447.061
Appearance Dark green to black powder
Melting Point 320 °C
Boiling Point N/A
Density N/A
Solubility in H2O Soluble
Absorption λmax 570nm
Exact Mass 443.954 g/mol
Monoisotopic Mass 443.954 g/mol

Meldola’s Blue Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements S24/25
Transport Information NONH for all modes of transport
WGK Germany 3

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/26/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Meldola’s Blue

Product Number: All applicable American Elements product codes, e.g. ZN-OMX-01-P

CAS #: 7057-57-0

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
Classification under CLP
This product has no classification under CLP.
2.2 Label elements
Label elements under CLP
This product has no label elements.
2.3 Other hazards
PBT
This substance is not identified as a PBT substance.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
Product name : Meldola's blue
MW: 378.92
CAS number : 7057-57-0
MF : C18H15ClN2O · 0.5[Cl2Zn]
EINECS : 230-338-6


SECTION 4. FIRST AID MEASURES

4.1 Description of first aid measures
Skin contact
Wash immediately with plenty of soap and water.
Eye contact
Bathe the eye with running water for 15 minutes.
Ingestion
Wash out mouth with water.
Inhalation
Consult a doctor.
4.2 Most important symptoms and effects, both acute and delayed
Skin contact
There may be mild irritation at the site of contact.
Eye contact
There may be irritation and redness.
Ingestion
There may be irritation of the throat.
Inhalation
There may be irritation of the throat with a feeling of tightness in the chest.
Delayed / immediate effects
Immediate effects can be expected after short-term exposure.
4.3 Indication of any immediate medical attention and special treatment needed
Immediate / special treatment
Not applicable.


SECTION 5. FIREFIGHTING MEASURES

5.1 Extinguishing media
Suitable extinguishing media for the surrounding fire should be used.
5.2 Special hazards arising from the substance or mixture
Exposure hazards
In combustion emits toxic fumes.
5.3 Advice for fire-fighters
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.


SECTION 6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions
Refer to section 8 of SDS for personal protection details.
6.2 Environmental precautions
Do not discharge into drains or rivers.
6.3 Methods and material for containment and cleaning up
Clean-up procedures
Wash the spillage site with large amounts of water.
6.3 Reference to other sections
Refer to section 8 of SDS.


SECTION 7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Handling requirements
Avoid the formation or spread of dust in the air.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Store in cool, well ventilated area. Keep container tightly closed. Avoid contact with water or humidity.
7.3 Specific end use(s)
No data available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters
Workplace exposure limits
Not applicable.
8.2 Exposure controls
Engineering measures
Not applicable.
Respiratory protection
Respiratory protective device with particle filter.
Hand protection
Protective gloves.
Eye protection
Safety glasses. Ensure eye bath is to hand.
Skin protection
Protective clothing.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
Physical Form: Powder
Colour: Black
Melting Point: ³280 [°C]
9.2 Other information
Not applicable.
10.1 Reactivity
Stable under recommended transport or storage conditions.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions
Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to
conditions or materials listed below.
10.4 Conditions to avoid
Heat.
10.5 Incompatible materials
Materials to avoid
Strong acids. Strong oxidising agents.


SECTION 10. STABILITY AND REACTIVITY

10.1 Reactivity
Stable under recommended transport or storage conditions.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions
Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to
conditions or materials listed below.
10.4 Conditions to avoid
Heat.
10.5 Incompatible materials
Materials to avoid
Strong acids. Strong oxidising agents.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Toxicity values
Not applicable.
11.2 Information on toxicological effects
Skin contact
There may be mild irritation at the site of contact.
Eye contact
There may be irritation and redness.
Ingestion
There may be irritation of the throat.
Inhalation
There may be irritation of the throat with a feeling of tightness in the chest.
Delayed / immediate effects
Immediate effects can be expected after short-term exposure.
Other information


SECTION 12. ECOLOGICAL INFORMATION

12.1 Toxicity
Not applicable.
12.2 Persistence and degradability
Biodegradable.
12.3 Bioaccumulative potential
No bioaccumulation potential.
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
This substance is not identified as a PBT substance.
12.6 Other adverse effects
Negligible ecotoxicity.


SECTION 13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Disposal operations
Transfer to a suitable container and arrange for collection by specialised disposal company.
NB
The user's attention is drawn to the possible existence of regional or national regulations regarding disposal.


SECTION 14. TRANSPORT INFORMATION

This product does not require a classification for transport.


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
Not applicable.
Chemical Safety Assessment
A chemical safety assessment has not been carried out for the substance or the mixture by the supplier.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Meldola’s Blue

Meldola’s Blue (8-Dimethylamino-2,3-benzophenoxazine Hemi(zinc Chloride) Salt, or 9-(Dimethylamino)benzo[a]phenoxazin-7-ium chloride zinc chloride) is one of numerous organometallic dyes manufactured by American Elements under the trade name AE Organometallics™. Organometallics are useful reagents, catalysts, and precursor materials with applications in thin film deposition, industrial chemistry, pharmaceuticals, LED manufacturing, and others. American Elements supplies organometallic compounds in most volumes including bulk quantities and also can produce materials to customer specifications. Please request a quote above for more information on pricing and lead time.

Meldola’s Blue Synonyms

Meldola Blue, 8-Dimethylamino-2,3-benzophenoxazine Hemi(zinc Chloride) Salt, 9-(Dimethylamino)benzo[a]phenoxazin-7-ium chloride zinc chloride, 9-methylaminobenzo alpha-phenoxazonium chloride, 9-(dimethylamino)-benzophenoxazinium chloride cpd with zinc chloride, Phenylene Blue, Basic Blue 6, Fast blue 3R, Naphthol blue R, Meldola's Blue 97% Dye Content

Chemical Identifiers

Linear Formula C18H15ClN2O•0.5Cl2Zn
MDL Number MFCD00012113
EC No. 230-338-6
Pubchem CID 81506
IUPAC Name zinc; benzo[a]phenoxazin-9-ylidene(dimethyl)azanium; trichloride
SMILES C[N+](=C1C=CC2=NC3=C(C=CC4=CC=CC=C43)OC2=C1)C.[Cl-].[Cl-].[Cl-].[Zn+2]
InchI Identifier InChI=1S/C18H15N2O.3ClH.Zn/c1-20(2)13-8-9-15-17(11-13)21-16-10-7-12-5-3-4-6-14(12)18(16)19-15;;;;/h3-11H,1-2H3;3*1H;/q+1;;;;+2/p-3
InchI Key YTEJSAFVYHDCSN-UHFFFAOYSA-K

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Chlorine

Chlorine is a Block P, Group 17, Period 3 element. Its electron configuration is [Ne]3s23p5. The chlorine atom has a covalent radius of 102±4 pm and its Van der Waals radius is 175 pm. Chlorine ModelIn its elemental form, chlorine is a yellow-green gas. Chlorine is the second lightest halogen after fluorine. It has the third highest electronegativity and the highest electron affinity of all elements, making it a strong oxidizing agent. It is rarely found by itself in nature. Chlorine was discovered and first isolated by Carl Wilhelm Scheele in 1774. It was first recognized as an element by Humphry Davy in 1808.

Nitrogen

See more Nitrogen products. Nitrogen is a Block P, Group 15, Period 2 element. Its electron configuration is [He]2s22p3. Nitrogen is an odorless, tasteless, colorless and mostly inert gas. It is the seventh most abundant element in the universe and it constitutes 78.09% (by volume) of Earth's atmosphere. Nitrogen was discovered by Daniel Rutherford in 1772.

Zinc

See more Zinc products. Zinc (atomic symbol: Zn, atomic number: 30) is a Block D, Group 12, Period 4 element with an atomic weight of 65.38. The number of electrons in each of zinc's shells is 2, 8, 18, 2, and its electron configuration is [Ar] 3d10 4s2. Zinc Bohr ModelThe zinc atom has a radius of 134 pm and a Van der Waals radius of 210 pm. Zinc was discovered by Indian metallurgists prior to 1000 BC and first recognized as a unique element by Rasaratna Samuccaya in 800. Zinc was first isolated by Andreas Marggraf in 1746. In its elemental form, zinc has a silver-gray appearance. It is brittle at ordinary temperatures but malleable at 100 °C to 150 °C.Elemental Zinc It is a fair conductor of electricity, and burns in air at high red producing white clouds of the oxide. Zinc is mined from sulfidic ore deposits. It is the 24th most abundant element in the earth's crust and the fourth most common metal in use (after iron, aluminum, and copper). The name zinc originates from the German word "zin," meaning tin.

Recent Research

TODAY'S TOP DISCOVERY!

November 25, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions