Parametric study on the stabilization of metal oxide nanoparticles in organic solvents: A case study with indium tin oxide (ITO) and heptane.

Title Parametric study on the stabilization of metal oxide nanoparticles in organic solvents: A case study with indium tin oxide (ITO) and heptane.
Authors Z. Almansoori; B. Khorshidi; B. Sadri; M. Sadrzadeh
Journal Ultrason Sonochem
DOI 10.1016/j.ultsonch.2017.09.012
Abstract

The tendency of nanoparticles (NPs) to form large aggregates has been a major limitation to their widespread applications where utilizing monodisperse and stable suspension of NPs is essential. The aggregation of NPs becomes more challenging when there is less affinity between the dispersed phase (NPs) and the continuous phase (solvent), such as, dispersion of hydrophilic metal oxide NPs into a nonpolar (organic) solvent. The objective of this study is to systematically investigate the synergistic effects of eight dispersion parameters on the size and stability of indium tin oxide (ITO) NPs in heptane. The matrix of experimentation was designed using an L18 Taguchi method. The analysis of variance (ANOVA) of the experimental results revealed that the most significant factors on the size and stability of NPs were the mass of ITO NPs and the volume of the dispersing agent. Taguchi signal-to-noise (SN) ratio analysis was used to determine the optimal factor levels for the preparation of well-dispersed and stable NP suspensions. Confirmation tests were carried out at the suggested levels of the ANOVA predictive model, and highly stable ITO NPs in heptane with the size distribution of 43.0-68.3nm were obtained. The results of the present parametric study can be used for a broad range of applications where effective stabilization of metal oxide NPs in organic solvents is desired.

Citation Z. Almansoori; B. Khorshidi; B. Sadri; M. Sadrzadeh.Parametric study on the stabilization of metal oxide nanoparticles in organic solvents: A case study with indium tin oxide (ITO) and heptane.. Ultrason Sonochem. 2018;40(Pt A):10031013. doi:10.1016/j.ultsonch.2017.09.012

Related Elements

Indium

See more Indium products. Indium (atomic symbol: In, atomic number: 49) is a Block P, Group 13, Period 5 element with an atomic weight of 114.818. The number of electrons in each of indium's shells is [2, 8, 18, 18, 3] and its electron configuration is [Kr] 4d10 5s2 5p1. The indium atom has a radius of 162.6 pm and a Van der Waals radius of 193 pm. Indium was discovered by Ferdinand Reich and Hieronymous Theodor Richter in 1863. Indium Bohr ModelIt is a relatively rare, extremely soft metal is a lustrous silvery gray and is both malleable and easily fusible. It has similar chemical properties to Elemental Indiumgallium such as a low melting point and the ability to wet glass. Fields such as optics and microelectronics that utilize semiconductor technology have wide uses for indium, especially in the form of Indiun Tin Oxide (ITO). Thin films of Copper Indium Gallium Selenide (CIGS) are used in high-performing solar cells. Indium's name is derived from the Latin word indicum, meaning violet.

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

Related Forms & Applications