Particle agglomeration of chitosan-magnesium aluminum silicate nanocomposites for direct compression tablets.

Title Particle agglomeration of chitosan-magnesium aluminum silicate nanocomposites for direct compression tablets.
Authors R. Khlibsuwan; T. Pongjanyakul
Journal Int J Pharm
DOI 10.1016/j.ijpharm.2017.11.030
Abstract

Exfoliated nanocomposites of chitosan-magnesium aluminum silicate (CS-MAS) particles are characterized by good compressibility but poor flowability. Thus, the aims of this study were to investigate agglomerates of CS-MAS nanocomposites prepared using the agglomerating agents water, ethanol, or polyvinylpyrrolidone (PVP) for flowability enhancement and to evaluate the agglomerates obtained as direct compression fillers for tablets. The results showed that the addition of agglomerating agents did not affect crystallinity, but slightly influenced thermal behavior of the CS-MAS nanocomposites. The agglomerates prepared using water were larger than those prepared using 95% ethanol because high swelling of the layer of chitosonium acetate occurred, allowing formation of solid bridges and capillary force between particles, leading to higher flowability and particle strength. Incorporation of PVP resulted in larger agglomerates with good flowability and high strength due to the binder hardening mechanism. The tablets prepared from agglomerates using water showed lower hardness, shorter disintegration times and faster drug release than those using 95% ethanol. In contrast, greater hardness and more prolonged drug release were obtained from the tablets prepared from agglomerates using PVP. Additionally, the agglomerates of CS-MAS nanocomposites showed good carrying capacity and provided desirable characteristics of direct compression tablets.

Citation R. Khlibsuwan; T. Pongjanyakul.Particle agglomeration of chitosan-magnesium aluminum silicate nanocomposites for direct compression tablets.. Int J Pharm. 2018;535(1-2):410419. doi:10.1016/j.ijpharm.2017.11.030

Related Elements

Aluminum

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

Magnesium

Magnesium Bohr ModelSee more Magnesium products. Magnesium (atomic symbol: Mg, atomic number: 12) is a Block S, Group 2, Period 3 element with an atomic mass of 24.3050. The number of electrons in each of Magnesium's shells is [2, 8, 2] and its electron configuration is [Ne] 3s2. The magnesium atom has a radius of 160 pm and a Van der Waals radius of 173 pm. Magnesium was discovered by Joseph Black in 1775 and first isolated by Sir Humphrey Davy in 1808. Magnesium is the eighth most abundant element in the earth's crust and the fourth most common element in the earth as a whole. Elemental MagnesiumIn its elemental form, magnesium has a shiny grey metallic appearance and is an extremely reactive. It is can be found in minerals such as brucite, carnallite, dolomite, magnesite, olivine and talc. Commercially, magnesium is primarily used in the creation of strong and lightweight aluminum-magnesium alloys, which have numerous advantages in industrial applications. The name "Magnesium" originates from a Greek district in Thessaly called Magnesia.

Silicon

See more Silicon products. Silicon (atomic symbol: Si, atomic number: 14) is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. Silicon Bohr MoleculeThe number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm. Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Elemental SiliconSilica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.

Related Forms & Applications