Physical Mechanism Behind Enhanced Photoelectrochemical and Photocatalytic Properties of Superhydrophilic Assemblies of 3D-TiO2 Microspheres with Arrays of Oriented, Single-Crystalline TiO2 Nanowires as Building Blocks Deposited on Fluorine-Doped Tin Oxid

Title Physical Mechanism Behind Enhanced Photoelectrochemical and Photocatalytic Properties of Superhydrophilic Assemblies of 3D-TiO2 Microspheres with Arrays of Oriented, Single-Crystalline TiO2 Nanowires as Building Blocks Deposited on Fluorine-Doped Tin Oxid
Authors S. Sadhu; P. Gupta; P. Poddar
Journal ACS Appl Mater Interfaces
DOI 10.1021/acsami.6b15420
Abstract

In comparison to the one-dimensional (1D) semiconductor nanostructures, the hierarchical, three-dimensional (3D) microstructures, composed of the arrays of 1D nanostructures as building blocks, show quite unique physicochemical properties due to efficient photon capture and enhanced surface to volume ratio, which aid in advancing the performance of various optoelectronic devices. In this contribution, we report the fabrication of surfactant-free, radially assembled, 3D titania (rutile-phase) microsphere arrays (3D-TMSAs) composed of bundles of single-crystalline titania nanowires (NWs) directly on fluorine-doped conducting oxide (FTO) substrates with tunable architecture. The effects of growth parameters on the morphology of the 3D-TMSAs have been studied thoroughly. The 3D-TMSAs grown on the FTO-substrate showed superior photon-harvesting owing to the increase in light-scattering. The photocatalytic and photon to electron conversion efficiency of dye-sensitized solar cells (DSSC), where the optimized 3D-TMSAs were used as an anode, showed around 44% increase in the photoconversion efficiency compared to that of Degussa P-25 as a result of the synergistic effect of higher surface area and enhanced photon scattering probability. The TMSA film showed superhydrophilicity without any prior UV irradiation. In addition, the presence of bundles of almost parallel NWs led to the formation of arrays of microcapacitors, which showed stable dielectric performance. The fabrication of single-crystalline, oriented, self-assembled TMSAs with bundles of titania nanowires as their building blocks deposited on transparent conducting oxide (TCO) substrates has vast potential in the area of photoelectrochemical research.

Citation S. Sadhu; P. Gupta; P. Poddar.Physical Mechanism Behind Enhanced Photoelectrochemical and Photocatalytic Properties of Superhydrophilic Assemblies of 3D-TiO2 Microspheres with Arrays of Oriented, Single-Crystalline TiO2 Nanowires as Building Blocks Deposited on Fluorine-Doped Tin Oxid. ACS Appl Mater Interfaces. 2017. doi:10.1021/acsami.6b15420

Related Elements

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

Titanium

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.

Fluorine

Fluorine is a Block P, Group 17, Period 2 element. Its electron configuration is [He]2s22p5. The fluorine atom has a covalent radius of 64 pm and its Van der Waals radius is 135 pm. In its elemental form, CAS 7782-41-4, fluorine gas has a pale yellow appearance. Fluorine was discovered by André-Marie Ampère in 1810. It was first isolated by Henri Moissan in 1886.

Related Forms & Applications