Sorption of iodide (I(-)) from aqueous solution using Mg/Al layered double hydroxides.

Title Sorption of iodide (I(-)) from aqueous solution using Mg/Al layered double hydroxides.
Authors F.L. Theiss; G.A. Ayoko; R.L. Frost
Journal Mater Sci Eng C Mater Biol Appl
DOI 10.1016/j.msec.2017.03.284
Abstract

In this article, the authors report the adsorption of iodide by Mg/Al LDHs and thermally activated LDH materials in laboratory scale batch experiments. The optimal Mg/Al cation ratio was 3:1while the percentage iodide uptake increased with increasing adsorbent dose up to 1g/20mL of solution. The effect of initial iodide concentration was investigated using the Langmuir and Freundlich adsorption isotherm models, while the pseudo second order kinetic model appeared to provide the best fit for the experimental data. High iodide uptake of over 80% could be achieved without completely eliminating dissolved or atmospheric carbonate and leaching of (131)I from LDHs did not appear to be a significant problem over the period of 28days investigated. These results demonstrate that LDHs, which are already commercially available in large quantities, are a technology that shows considerable promise for the removal of radioiodine from aqueous solution.

Citation F.L. Theiss; G.A. Ayoko; R.L. Frost.Sorption of iodide (I(-)) from aqueous solution using Mg/Al layered double hydroxides.. Mater Sci Eng C Mater Biol Appl. 2017;77:12281234. doi:10.1016/j.msec.2017.03.284

Related Elements

Aluminum

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

Iodine

See more Iodine products. Iodine (atomic symbol: I, atomic number: 53) is a Block P, Group 17, Period 5 element with an atomic radius of 126.90447. The number of electrons in each of Iodine's shells is 2, 8, 18, 18, 7 and its electron configuration is [Kr] 4d10 5s2 5p5. The iodine atom has a radius of 140 pm and a Van der Waals radius of 198 pm. In its elemental form, iodine has a lustrous metallic gray appearance as a solid and a violet appearance as a gas or liquid solution. Elemental IodineIodine forms compounds with many elements, but is less active than the other halogens. It dissolves readily in chloroform, carbon tetrachloride, or carbon disulfide. Iodine compounds are important in organic chemistry and very useful in the field of medicine. Iodine was discovered and first isolated by Bernard Courtois in 1811. The name Iodine is derived from the Greek word "iodes" meaning violet.

Magnesium

Magnesium Bohr ModelSee more Magnesium products. Magnesium (atomic symbol: Mg, atomic number: 12) is a Block S, Group 2, Period 3 element with an atomic mass of 24.3050. The number of electrons in each of Magnesium's shells is [2, 8, 2] and its electron configuration is [Ne] 3s2. The magnesium atom has a radius of 160 pm and a Van der Waals radius of 173 pm. Magnesium was discovered by Joseph Black in 1775 and first isolated by Sir Humphrey Davy in 1808. Magnesium is the eighth most abundant element in the earth's crust and the fourth most common element in the earth as a whole. Elemental MagnesiumIn its elemental form, magnesium has a shiny grey metallic appearance and is an extremely reactive. It is can be found in minerals such as brucite, carnallite, dolomite, magnesite, olivine and talc. Commercially, magnesium is primarily used in the creation of strong and lightweight aluminum-magnesium alloys, which have numerous advantages in industrial applications. The name "Magnesium" originates from a Greek district in Thessaly called Magnesia.

Related Forms & Applications