Tetrakis(diethylamino)zirconium

TDEAZ

CAS #:

Linear Formula:

Zr[N(CH2CH3)2]4

MDL Number:

MFCD00015649

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Tetrakis(diethylamino)zirconium
ZR-TDEA-02-LIQ
Pricing > SDS > Data Sheet >
(3N) 99.9% Tetrakis(diethylamino)zirconium
ZR-TDEA-03-LIQ
Pricing > SDS > Data Sheet >
(4N) 99.99% Tetrakis(diethylamino)zirconium
ZR-TDEA-04-LIQ
Pricing > SDS > Data Sheet >
(5N) 99.999% Tetrakis(diethylamino)zirconium
ZR-TDEA-05-LIQ
Pricing > SDS > Data Sheet >

Tetrakis(diethylamino)zirconium Properties (Theoretical)

Compound Formula C16H40N4Zr
Molecular Weight 379.74
Appearance Yellow liquid
Melting Point N/A
Boiling Point 112 °C
Density 1.026 g/mL
Solubility in H2O Reacts violently
Monoisotopic Mass 378.230002 g/mol

Tetrakis(diethylamino)zirconium Health & Safety Information

Signal Word Danger
Hazard Statements H225-H261-H314-H318
Hazard Codes N/A
Precautionary Statements P231+P232-P235-P303+P361+P353-P305+P351+P338-P422-P501
Risk Codes N/A
Safety Statements N/A
Transport Information UN3399 4.3/PG II
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/24/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Tetrakis(diethylamino)zirconium

Product Number: All applicable American Elements product codes, e.g. ZR-TDEA-02-LIQ , ZR-TDEA-04-LIQ , ZR-TDEA-03-LIQ , ZR-TDEA-05-LIQ

CAS #: 13801-49-5

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 2 H225 Highly flammable liquid and vapor.
Water-react. 2 H261 In contact with water releases flammable gas.
GHS05 Corrosion
Skin Corr. 1B H314 Causes severe skin burns and eye damage.
Eye Dam. 1 H318 Causes serious eye damage.
Label elements
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms

Flame - GHS02 Corrosion - GHS05

GHS02d GHS05
Signal word Danger
Hazard-determining components of labeling:
Tetrakis(diethylamino)zirconium, 99%
Hazard statements
H225 Highly flammable liquid and vapor.
H261 In contact with water releases flammable gas.
H314 Causes severe skin burns and eye damage.
Precautionary statements
P231+P232 Handle under inert gas. Protect from moisture.
P235 Keep cool.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/
shower.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Classification system:
NFPA ratings (scale 0 - 4)
Health = 3
Fire = 0
Reactivity = 2
The substance demonstrates unusual reactivity with water.
HMIS-ratings (scale 0 - 4)
Health = 3
Fire = 0
Reactivity = 2
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical characterization: Substances
CAS No. Description
13801-49-5 Tetrakis(diethylamino)zirconium, 99%


SECTION 4. FIRST AID MEASURES

Description of first aid measures
General information: Immediately remove any clothing soiled by the product.
After inhalation: In case of unconsciousness place patient stably in side position for transportation.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing agents:
Sand. Do not use water.
CO2, sand, extinguishing powder. Do not use water.
For safety reasons unsuitable extinguishing agents: Water with full jet
Special hazards arising from the substance or mixture No further relevant information available.
Advice for firefighters
Protective equipment: No special measures required.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions: Prevent seepage into sewage system, workpits and cellars.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Handling:
Precautions for safe handling Open and handle receptacle with care.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Conditions for safe storage, including any incompatibilities
Storage: Keep cool.
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Recommended storage temperature: Store at temperatures not exceeding -18 °C.
Specific end use(s) No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems: No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace: Not required.
Additional information: The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Breathing equipment: Not required.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Color: Yellow
Odor: Fish-like
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range: no data °C
Boiling point/Boiling range: 112 /0.1mm °C (234 /32mm °F)
Flash point: Not applicable.
Flammability (solid, gaseous): Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Auto igniting: Not determined.
Danger of explosion: Not determined.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: no data hPa
Density at 20 °C (68 °F): 1.026 g/cm³ (8.562 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Other information No further relevant information available.


SECTION 10. STABILITY AND REACTIVITY

Reactivity No further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin: Caustic effect on skin and mucous membranes.
on the eye:
Strong caustic effect.
Strong irritant with the danger of severe eye injury.
Sensitization: No sensitizing effects known.
Additional toxicological information:
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus
and stomach.
Carcinogenic categories
IARC (International Agency for Research on Cancer)
Substance is not listed.
NTP (National Toxicology Program)
Substance is not listed.
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Aquatic toxicity: No further relevant information available.
Persistence and degradability No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential No further relevant information available.
Mobility in soil No further relevant information available.
Additional ecological information:
General notes: Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
DOT, IMDG, IATA UN3399
UN proper shipping name
DOT, IATA Organometallic substance, liquid, water-reactive, flammable
IMDG ORGANOMETALLIC SUBSTANCE, LIQUID, WATER-REACTIVE,
FLAMMABLE
Transport hazard class(es)
DOT
Class 4.3 Substances which, in contact with water, emit flammable gases
Label 4.3, 3
IMDG
Class 4.3 Substances which, in contact with water, emit flammable gases
Label 4.3/3
IATA
Class 4.3 Substances which, in contact with water, emit flammable gases
Label 4.3 (3)
Packing group
DOT, IMDG, IATA II
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
EMS Number: F-G,S-N
Stowage Category D
Stowage Code SW2 Clear of living quarters.
Handling Code H1 Keep as dry as reasonably practicable
Segregation Code SG26 In addition: from goods of classes 2.1 and 3 when stowed on
deck of a containership a minimum distance of two container spaces
athwartship shall be maintained, when stowed on ro-ro ships a
distance of 6 m athwartship shall be maintained.
SG35 Stow "separated from" acids.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: 1 L
On cargo aircraft only: 5 L
IMDG
Limited quantities (LQ) 500 ml
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 500 ml
UN "Model Regulation": UN 3399 ORGANOMETALLIC SUBSTANCE, LIQUID, WATERREACTIVE,
FLAMMABLE, 4.3 (3), II


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is not listed.
Section 313 (Specific toxic chemical listings):
Substance is not listed.
TSCA (Toxic Substances Control Act):
Substance is not listed.
Proposition 65
Chemicals known to cause cancer:
Substance is not listed.
Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
Chemicals known to cause developmental toxicity:
Substance is not listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
Substance is not listed.
TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02 GHS05
Signal word Danger
Hazard-determining components of labeling:
Tetrakis(diethylamino)zirconium, 99%
Hazard statements
H225 Highly flammable liquid and vapor.
H261 In contact with water releases flammable gas.
H314 Causes severe skin burns and eye damage.
Precautionary statements
P231+P232 Handle under inert gas. Protect from moisture.
P235 Keep cool.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/
shower.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Tetrakis(diethylamino)zirconium

Tetrakis(diethylamino)zirconium is one of numerous organometallic compounds sold by American Elements under the trade name AE Organometallics™. Organometallics are useful reagent, catalyst, and precursor materials with applications in thin film deposition, industrial chemistry, pharmaceuticals, LED manufacturing, and others. American Elements supplies Tetrakis(diethylamino)zirconium in most volumes including bulk quantities and also can produce materials to customer specifications. Please request a quote above for more information on pricing and lead time.

Tetrakis(diethylamino)zirconium Synonyms

TDEAZ, Zirconium tetrakis(diethylamide); zirconium tetrakis(diethylamino); zirconium diethylamide; tetrakis(diethylamido)zirconium; Tetrakis(diethylamido)zirconium(IV); Zirconium tetra(diethyl amide)

Chemical Identifiers

Linear Formula Zr[N(CH2CH3)2]4
MDL Number MFCD00015649
EC No. N/A
Pubchem CID 139603
IUPAC Name diethylazanide; zirconium(4+)
SMILES CC[N-]CC.CC[N-]CC.CC[N-]CC.CC[N-]CC.[Zr+4]
InchI Identifier InChI=1S/4C4H10N.Zr/c4*1-3-5-4-2;/h4*3-4H2,1-2H3;/q4*-1;+4
InchI Key GOVWJRDDHRBJRW-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Nitrogen

See more Nitrogen products. Nitrogen is a Block P, Group 15, Period 2 element. Its electron configuration is [He]2s22p3. Nitrogen is an odorless, tasteless, colorless and mostly inert gas. It is the seventh most abundant element in the universe and it constitutes 78.09% (by volume) of Earth's atmosphere. Nitrogen was discovered by Daniel Rutherford in 1772.

Zirconium

See more Zirconium products. Zirconium (atomic symbol: Zr, atomic number: 40) is a Block D, Group 4, Period 5 element with an atomic weight of 91.224. Zirconium Bohr ModelThe number of electrons in each of Zirconium's shells is 2, 8, 18, 10, 2 and its electron configuration is [Kr]4d2 5s2. The zirconium atom has a radius of 160 pm and a Van der Waals radius of 186 pm. Zirconium was discovered by Martin Heinrich Klaproth in 1789 and first isolated by Jöns Jakob Berzelius in 1824. In its elemental form, zirconium has a silvery white appearance that is similar to titanium. Zirconium's principal mineral is zircon (zirconium silicate). Elemental ZirconiumZirconium is commercially produced as a byproduct of titanium and tin mining and has many applications as a opacifier and a refractory material. It is not found in nature as a free element. The name of zirconium comes from the mineral zircon, the most important source of zirconium, and from the Persian wordzargun, meaning gold-like.

TODAY'S TOP DISCOVERY!

November 24, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions