View the history of American Elements on Wikipedia

Rubidium Oxide Pellets

CAS #:

18088-11-4

Linear Formula:

Rb₂O

MDL Number:

N/A

EC No.:

241-993-2

View the history of American Elements on Wikipedia

ORDER

PRODUCT	Product Code	ORDER	SAFETY DATA	TECHNICAL DATA
(2N) 99% Rubidium Oxide Pellets	RB-OX-02-PE	Pricing >	SDS >	Data Sheet >
(3N) 99.9% Rubidium Oxide Pellets	RB-OX-03-PE	Pricing >	SDS >	Data Sheet >
(4N) 99.99% Rubidium Oxide Pellets	RB-OX-04-PE	Pricing >	SDS >	Data Sheet >
(5N) 99.999% Rubidium Oxide Pellets	RB-OX-05-PE	Pricing >	SDS >	Data Sheet >

Question? Ask an American Elements Materials Science Engineer

Rubidium Oxide Pellets Properties (Theoretical)

Compound Formula	ORb₂
Molecular Weight	186.935
Appearance	Yellow to Yellow-Brown Crystalline Solid
Melting Point	>500 ?C (>932 ?F)
Boiling Point	N/A
Density	4.0 g/cm3
Solubility in H2O	N/A
Exact Mass	185.818494
Monoisotopic Mass	185.818494

Rubidium Oxide Pellets Health & Safety Information

Signal Word	Danger
Hazard Statements	H260-H314
Hazard Codes	N/A
Precautionary Statements	P223-P231 + P232-P280-P305 + P351 + P338-P370 + P378-P422
Flash Point	Not applicable
Risk Codes	N/A
Safety Statements	N/A
RTECS Number	N/A
Transport Information	UN 3131 8(4.3) / PGI
WGK Germany	3
GHS Pictograms	GHS05 Corrosive GHS02 Flame GHS07 Exclamation Point

View and Print SDS

Print to PDF

SAFETY DATA SHEET

Date Accessed: 11/22/2024

Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Rubidium Oxide Pellets

Product Number: All applicable American Elements product codes, e.g. RB-OX-02-PE , RB-OX-03-PE , RB-OX-04-PE , RB-OX-05-PE

CAS #: 18088-11-4

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887

SECTION 2. HAZARDS IDENTIFICATION

Statement of Hazard: Corrosive, Irritant, Respiratory irritant
Acute Health Hazard: Irritant to eyes, skin, mucous membranes and respiratory system.
May be harmful by ingestion, skin absorption and inhalation.
Chronic Health Hazard: Not Available
HMIS Rating: H: 2 F: 0 P: 0
NFPA Rating: H: 2 F: 0 P: 0

To the best of our knowledge, the toxicological properties of this chemical have not been
thoroughly investigated. Use appropriate procedures and precautions to prevent or minimize
exposure.

Pictogram:

GHS05 GHS07
Signal Word: Danger
Hazard Statement(s): H302 Harmful if swallowed.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
Precautionary Statement(s): P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P352 IF ON SKIN: wash with plenty of soap and water.
P304+P340 IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313 IF SKIN irritation occurs: Get medical advice/attention.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name: Rubidium oxide
CAS Number: 18088-11-4
MDL Number: MFCD00011189
EINECS Number: 241-993-2
Beilstein Registry Number: Not Available
Molecular Formula: Rb₂O
Molecular Weight: 186.93
Content: As specified in product name.

SECTION 4. FIRST AID MEASURES

Eye Contact: Flush eyes with large amounts of water for fifteen minutes. Separate eyelids with fingers. If irritation persists, seek medical attention.
Skin Contact: Wash skin with soap and water. If irritation persists, seek medical attention.
Ingestion: Do not induce vomiting. Seek medical attention.
Inhalation: Move to a fresh air environment. Contact a physician if breathing becomes difficult.

SECTION 5. FIREFIGHTING MEASURES

Flash Point (ºC): Not Available
Explosion Limits: Not Available
Autoignition (ºC): Not Available
Extinguishing Media: Carbon dioxide, dry chemical powder, alcohol-resistant foam, or water spray
Protective Equipment: Wear self-contained respirator and fully protective impervious suit.
Specific Hazards: May emit hazardous fumes under fire conditions.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Protection: Wear a self-contained breathing apparatus, rubber boots and gloves, and disposable coveralls. Dispose of coveralls after use. Remove from ignition sources if safe to do so. Follow emergency response plan and contact proper authorities if needed. Keep unprotected persons away.
Environmental Protection: Keep spills out of sewers and bodies of water. Dike and contain the spill with inert material. Absorb on sand, vermiculite or diatomite. Transfer material to a container for disposal or recovery. Ventilate area and wash spill site after material pickup is complete.

SECTION 7. HANDLING AND STORAGE

Handling and Storage: Avoid breathing dust, vapor, mist or gas. Avoid contact with skin and eyes. Avoid prolonged or repeated exposure. Use only in a chemical fume hood. Open and handle container with care. Keep ignition sources away.
Store in a tightly closed container in a dry, well-ventilated place.
Sensitivities: Not Available
Storage Temperature (ºC): 15 to 30

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Controls: Use product in a well ventilated area or under a fume hood. Use proper lab equipment while handling this product. Keep away from incompatible materials for possible risk of hazardous reaction.
Eye Protection: Wear appropriate protective eyeglass or chemical safety goggles. Make sure that there is an eyewash station in your vicinity.
Skin Protection: Wear impervious gloves and protective clothing.
Respiratory Protection: Use a NIOSH approved respirator when exposure limits are exceeded or if irritation or other symptoms are experienced.
Exposure Limits:
Country / Source / Type: Value
USA / ACGIH / TWA: Not Available
USA / OSHA / STEL: Not Available
USA / OSHA / PEL: Not Available

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Crystalline powder or solid
Odor: Not Available
Odor Threshold: Not Available
Flash Point (ºC): Not Available
Autoignition (ºC): Not Available
UEL % by Volume: Not Available
LEL % by Volume: Not Available
Melting Point (ºC): 400
Boiling Point (ºC): Not Available
Evaporation Rate: Not Available
pH Value: Not Available
Density (g/cm³): 3.72
Refractive Index (n²ºD): Not Available
Viscosity: Not Available
Solubility in Water: Not Available
Solubility in Other: Not Available
Vapor Pressure (mmHg): Not Available
Vapor Density (Air=1): Not Available

SECTION 10. STABILITY AND REACTIVITY

Stability: Stable under normal temperatures and pressures.
Incompatibility: Strong oxidizing agents
Reactivity: Product may react with incompatible materials to release other hazardous substances.
Conditions to Avoid: Heat, flame, sparks, other ignition sources.
Hazardous Decomposition Products: Rubidium oxides

SECTION 11. TOXICOLOGICAL INFORMATION

RTECS Reference: Not Available
Target Organs: Not Available
Toxicity Data: Not Available
Carcinogenicity:
National Toxicology Program (NTP) listed: Not Available
International Agency for Research on Cancer (IARC) listed: Not Available
Potential Symptoms: Not Available

SECTION 12. ECOLOGICAL INFORMATION

Toxicity: Not Available

SECTION 13. DISPOSAL CONSIDERATIONS

Contact a licensed professional waste disposal service. Dispose in a manner consistent with federal, state and local environmental regulations.

SECTION 14. TRANSPORT INFORMATION

DOT Shipping Name: Corrosive Solid, N.O.S.
DOT UN Number: UN1759
DOT Hazard Class: Class 8
DOT Packing Group: PGII
IMDG Shipping Name: Corrosive Solid, N.O.S.
IMDG UN Number: UN1759
IMDG Hazard Class: Class 8
IMDG Packing Group: PGII
Marine Pollutant: No
IATA Shipping Name: Corrosive Solid, N.O.S.
IATA UN Number: UN1759
IATA Hazard Class: Class 8
IATA Packing Group: PGII

SECTION 15. REGULATORY INFORMATION

United States
Toxic Substance Control Act (TSCA) listed: Yes
Superfund Amendments and Reauthorization Act (SARA 302) listed: No
Superfund Amendments and Reauthorization Act (SARA 311/312) listed: No
Superfund Amendments and Reauthorization Act (SARA 313) listed: No
European Union
European Inventory of Existing Chemical Substances (EINECS): 241-993-2
Canada
Canadian Domestic Substances List (DSL) listed: Yes
Canadian Non-Domestic Substances List (NDSL) listed: No

SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

Print this page

About Rubidium Oxide Pellets

American Elements specializes in producing high purity uniform shaped Rubidium Oxide Pellets with the highest possible density 99.9+% Ultra High Purity Metallic Pellets

99.9+% Ultra High Purity Metallic Pellets

and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Pellet sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Pellets outside this range for ultra high purity thin film applications, such as fuel cells and solar energy layers. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes. We also produce Rubidium Oxide as pieces, tablets, powder, and sputtering target. Oxide compounds are not conductive to electricity. However, certain perovskite structured oxides are electronically conductive finding application in the cathode of solid oxide fuel cells and oxygen generation systems. Other shapes are available by request.

Rubidium Oxide Pellets Synonyms

Dirubidium oxide; Rubidium(I) oxide; Dirubidium monoxide

Chemical Identifiers

Linear Formula	Rb₂O
MDL Number	N/A
EC No.	241-993-2
Beilstein/Reaxys No.	N/A
Pubchem CID	10154361
IUPAC Name	oxygen(2-); rubidium(1+)
SMILES	[O-2].[Rb+].[Rb+]
InchI Identifier	InChI=1S/O.2Rb/q-2;2*+1
InchI Key	YIONJVUULJNSMK-UHFFFAOYSA-N

Customers For Rubidium Oxide Pellets Have Also Viewed

Rubidium Oxide Nanoparticle Dispersion	Rubidium Oxide Tablets	Rubidium Oxide Powder
Rubidium Oxide Nanoparticles / Nanopowder	Rubidium Oxide Particles	Rubidium Oxide Pieces
Rubidium Oxide	Rubidium Oxide Sputtering Target	Rubidium Oxide Shot

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Rubidium

37 Rb 85.467800000 Rubidium

See more Rubidium products. Rubidium (atomic symbol: Rb, atomic number: 37) is a Block S, Group 1, Period 5 element with an atomic weight of 5.4678. The number of electrons in each of Rubidium's shells is [2, 8, 18, 8, 1] and its electron configuration is [Kr] 5s¹. The rubidium atom has a radius of 248 pm and a Van der Waals radius of 303 pm. Rubidium Bohr Model Rubidium is highly reactive, with properties similar to other Group 1 alkali metals, e.g., rapid oxidation in air. In its elemental form, rubidium has a gray white appearance. Rubidium is found in the minerals lepidolite, leucite, pollucite, carnallite, and zinnwaldite as well as some potassium minerals. Rubidium was discovered by Robert Bunsen and Gustav Kirchhoff in 1861 and was first isolated by George de Hevesy. The name Rubidium, originates from the Latin word rubidus, meaning "dark or deepest red."