Bis(dimethylamino-2-propoxy)copper(II)

Cu(dmap)2

CAS #:

Linear Formula:

Cu(C5H12NO)2

MDL Number:

MFCD17014025

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
≥97% Bis(dimethylamino-2-propoxy)copper(II)
CU2-OMX-017-C
Pricing > SDS > Data Sheet >

Bis(dimethylamino-2-propoxy)copper(II) Properties (Theoretical)

Compound Formula C10H24CuN2O2
Molecular Weight 267.86
Appearance Violet crystalline solid
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 267.113 g/mol
Monoisotopic Mass 267.113 g/mol

Bis(dimethylamino-2-propoxy)copper(II) Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319-H335
Hazard Codes Xi
Precautionary Statements P231-P222-P305+P351+P338-P403+P233-P422-P501
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/23/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Bis(dimethylamino-2-propoxy)copper(II)

Product Number: All applicable American Elements product codes, e.g. CU2-OMX-017-C

CAS #: 185827-91-2

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.
· Label elements
· GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
· Hazard pictograms

Exclamation Mark - GHS07

· Signal word Warning
· Hazard-determining components of labeling:
Bis(dimethylamino-2-propoxy)copper(II), min. 98% Cu(dmap)2
· Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
· Precautionary statements
P231 Handle under inert gas.
P222 Do not allow contact with air.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· Classification system:
· NFPA ratings (scale 0 - 4)
Health = 1
Fire = 0
Reactivity = 0
· HMIS-ratings (scale 0 - 4)
Health = 1
Fire = 0
Reactivity = 0
· Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

· Chemical characterization: Substances
· CAS No. Description
185827-91-2 Bis(dimethylamino-2-propoxy)copper(II), min. 98% Cu(dmap)2


SECTION 4. FIRST AID MEASURES

· Description of first aid measures
· After inhalation: In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed No further relevant information available.
· Indication of any immediate medical attention and special treatment needed
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

· Extinguishing media
· Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: No special measures required.


SECTION 6. ACCIDENTAL RELEASE MEASURES

· Personal precautions, protective equipment and emergency procedures Not required.
· Environmental precautions: No special measures required.
· Methods and material for containment and cleaning up:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

· Handling: Handle under inert gas.
· Precautions for safe handling Open and handle receptacle with care.
· Information about protection against explosions and fires: No special measures required.
· Conditions for safe storage, including any incompatibilities
· Storage: Store contents under inert gas.
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
· Specific end use(s) No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

· Additional information about design of technical systems: No further data; see item 7.
· Control parameters
· Components with limit values that require monitoring at the workplace: Not required.
· Additional information: The lists that were valid during the creation were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
· Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection:
Tightly sealed goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

· Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Crystalline
Color: Violet
· Odor: Odorless
· Odor threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/Melting range: no data °C
Boiling point/Boiling range: no data °C
· Flash point: Not applicable.
· Flammability (solid, gaseous): Not determined.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto igniting: Not determined.
· Danger of explosion: Product does not present an explosion hazard.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapor pressure: no data hPa
· Density: Not determined.
· Relative density Not determined.
· Vapor density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
Water: Insoluble.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
· Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Solids content: 100.0 %
· Other information No further relevant information available.


SECTION 10. STABILITY AND REACTIVITY

· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid No further relevant information available.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

· Information on toxicological effects
· Acute toxicity:
· Primary irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
Substance is not listed.
· NTP (National Toxicology Program)
Substance is not listed.
· OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes: Not known to be hazardous to water.
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

· Waste treatment methods
· Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

· UN-Number
· DOT, ADN, IMDG, IATA not regulated
· UN proper shipping name
· DOT, ADN, IMDG, IATA not regulated
· Transport hazard class(es)
· DOT, ADN, IMDG, IATA
· Class not regulated
· Packing group
· DOT, IMDG, IATA not regulated
· Environmental hazards:
· Marine pollutant: No
· Special precautions for user Not applicable.
· Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
· UN "Model Regulation": not regulated


SECTION 15. REGULATORY INFORMATION

· Safety, health and environmental regulations/legislation specific for the substance or mixture
· Sara
· Section 355 (extremely hazardous substances):
Substance is not listed.
· Section 313 (Specific toxic chemical listings):
Substance is not listed.
· TSCA (Toxic Substances Control Act):
Substance is not listed.
· Proposition 65
· Chemicals known to cause cancer:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
· Chemicals known to cause developmental toxicity:
Substance is not listed.
· Carcinogenic categories
· EPA (Environmental Protection Agency)
Substance is not listed.
· TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
· NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
· GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labeling:
Bis(dimethylamino-2-propoxy)copper(II), min. 98% Cu(dmap)2
· Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
· Precautionary statements
P231 Handle under inert gas.
P222 Do not allow contact with air.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Bis(dimethylamino-2-propoxy)copper(II)

Bis(dimethylamino-2-propoxy)copper(II) (Cu(dmap)2) is one of numerous organometallic compounds manufactured by American Elements under the trade name AE Organometallics™. Organometallics are useful reagents, catalysts, and precursor materials with applications in thin film deposition, industrial chemistry, pharmaceuticals, LED manufacturing, and others. American Elements supplies organometallic compounds in most volumes including bulk quantities and also can produce materials to customer specifications. Please request a quote above for more information on pricing and lead time.

Bis(dimethylamino-2-propoxy)copper(II) Synonyms

Cu(dmap)2, Bis[1-(dimethylamino)-2-propanolato]copper

Chemical Identifiers

Linear Formula Cu(C5H12NO)2
MDL Number MFCD17014025
EC No. N/A
Pubchem CID 121234236
IUPAC Name copper; 1-(dimethylamino)propan-1-olate
SMILES CCC(N(C)C)[O-].CCC(N(C)C)[O-].[Cu+2]
InchI Identifier InChI=1S/2C5H12NO.Cu/c2*1-4-5(7)6(2)3;/h2*5H,4H2,1-3H3;/q2*-1;+2
InchI Key AZOFWQDMTKZNMJ-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Nitrogen

See more Nitrogen products. Nitrogen is a Block P, Group 15, Period 2 element. Its electron configuration is [He]2s22p3. Nitrogen is an odorless, tasteless, colorless and mostly inert gas. It is the seventh most abundant element in the universe and it constitutes 78.09% (by volume) of Earth's atmosphere. Nitrogen was discovered by Daniel Rutherford in 1772.

TODAY'S TOP DISCOVERY!

November 23, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions