Boron-11 Oxide Isotope

CAS #:

Linear Formula:

11B2O3

MDL Number:

MFCD00198017

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Boron 11 Oxide
BO-OX-01-ISO.11
Pricing > SDS > Data Sheet >

Boron-11 Oxide Isotope Properties (Theoretical)

Compound Formula 11B2O3
Molecular Weight 70.02
Appearance White Powder or Granules
Melting Point 450 °C
Boiling Point N/A
Density 2.74 g/cm3 (25 °C)
Solubility in H2O N/A
Exact Mass 70.003355
Monoisotopic Mass 70.003355

Boron-11 Oxide Isotope Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319-H335-H360
Hazard Codes Xn
Precautionary Statements P201-P261-P305 + P351 + P338-P308 + P313
Risk Codes 36/37/38
Safety Statements 26-36
RTECS Number N/A
Transport Information NONH for all modes of transport
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/25/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Boron-11 Oxide Isotope

Product Number: All applicable American Elements product codes, e.g. BO-OX-01-ISO.11

CAS #: 77704-22-4

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Skin irritation (Category 2), H315
Eye irritation (Category 2A), H319
Reproductive toxicity (Category 1B), H360
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335

Exclamation Mark - GHS07 Health Hazard - GHS08

Signal word: Danger

Hazard statement(s):
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H360 May damage fertility or the unborn child.

Precautionary statement(s):
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P321 Specific treatment (see supplemental first aid instructions on this label).
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.

Hazards not otherwise classified (HNOC) or not covered by GHS - none


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Formula: 11B2O3
Molecular weight: 70.02 g/mol
CAS-No: 77704-22-4


SECTION 4. FIRST AID MEASURES

General advice:
Move out of dangerous area.Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled:
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact:
Wash off with soap and plenty of water. Consult a physician.

In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed:
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Most important symptoms and effects, both acute and delayed:
The most important known symptoms and effects are described in the labelling

Indication of any immediate medical attention and special treatment needed:
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Special hazards arising from the substance or mixture:
Borane/boron oxides

Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.

Further information:
No data available


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions:
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Methods and materials for containment and cleaning up:
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.


SECTION 7. HANDLING AND STORAGE

Precautions for safe handling:
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.

Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): 6.1D: Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects.

Specific end use(s):
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters
Components with workplace control parameters:
Contains no substances with occupational exposure limit values.

Exposure controls
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Personal protective equipment
Eye/face protection:
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection:
Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure:
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

nformation on basic physical and chemical properties
Appearance Form: solid
Odour No data available
Odour Threshold No data available
pH No data available
Melting point/freezing point
Melting point/range: 450 °C (842 °F) - lit.
Initial boiling point and boiling range:
No data available
Flash point Not applicable
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability or explosive limits
No data available
Vapour pressure No data available
Vapour density No data available
Relative density 2.474 g/mL at 25 °C (77 °F)
Water solubility No data available
Partition coefficient: noctanol/water: No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Viscosity No data available
Explosive properties No data available
Oxidizing properties No data available


SECTION 10. STABILITY AND REACTIVITY

Reactivity: No data available

Chemical stability:
Stable under recommended storage conditions.

Possibility of hazardous reactions:
No data available

Conditions to avoid:
Avoid moisture.

Incompatible materials: acids, Hydroxides

Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions. - Borane/boron oxides
Other decomposition products - No data available


SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity:
No data available

Dermal: No data available
No data available

Skin corrosion/irritation
No data available

Serious eye damage/eye irritation
No data available

Respiratory or skin sensitisation
No data available

Germ cell mutagenicity

Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is on OSHA’s
list of regulated carcinogens.

Reproductive toxicity:
May damage fertility. May damage the unborn child.
Presumed human reproductive toxicant

Specific target organ toxicity - single exposure:
Inhalation - May cause respiratory irritation.

Specific target organ toxicity - repeated exposure:
No data available

Aspiration hazard:
No data available

Additional Information:
RTECS: Not available


SECTION 12. ECOLOGICAL INFORMATION

Toxicity: No data available

Persistence and degradability:
No data available

Bioaccumulative potential:
No data available

Mobility in soil:
No data available(Boron-11B oxide)

Results of PBT and vPvB assessment:
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

Other adverse effects
No data available


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods:
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.

Contaminated packaging:
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods

This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.


SECTION 15. REGULATORY INFORMATION

SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards
Acute Health Hazard, Chronic Health Hazard
Massachusetts Right To Know Components
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components
Boron-11B oxide
CAS-No. 77704-22-4
New Jersey Right To Know Components
Boron-11B oxide
CAS-No. 77704-22-4
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Boron-11 Oxide Isotope

Boron 11 Oxide (Boron-11) is a stable (non-radioactive) isotope of Boron. It is both naturally occurring and produced by fission. Boron 11 Oxide is one of over 250 stable isotopes produced by American Elements for biological and biomedical labeling, as target materials and other applications. Boron Oxide is also available in ultra high purity and as nanoparticles. For the thin film applications it is available as rod, pellets, pieces, granules and sputtering targets and as either an ingot or powder. Boron Oxide 11 isotopic material is generally immediately available. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Boron-11 Oxide Isotope Synonyms

Boron-11B oxide; Boron-11 Oxide; oxo(oxoboranyloxy)borane; Dioxo(11B2)diboroxane; (11-B)2O3, 99 atom % 11B

Chemical Identifiers

Linear Formula 11B2O3
MDL Number MFCD00198017
EC No. N/A
Beilstein/Reaxys No. N/A
Pubchem CID 16212771
IUPAC Name oxo(oxoboranyloxy)borane
SMILES [11B](=O)O[11B]=O
InchI Identifier InChI=1S/B2O3/c3-1-5-2-4/i1+0,2+0
InchI Key JKWMSGQKBLHBQQ-ZCWHFVSRSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Boron

See more Boron products. Boron Bohr ModelBoron (atomic symbol: B, atomic number: 5) is a Block P, Group 13, Period 2 element with an atomic weight of 10.81. The number of electrons in each of boron's shells is 2, 3 and its electron configuration is [He] 2s2 2p1. The boron atom has a radius of 90 pm and a Van der Waals radius of 192 pm. Boron was discovered by Joseph Louis Gay-Lussac and Louis Jacques Thénard in 1808 and was first isolated by Humphry Davy later that year. Boron is classified as a metalloid is not found naturally on earth. Elemental BoronAlong with carbon and nitrogen, boron is one of the few elements in the periodic table known to form stable compounds featuring triple bonds. Boron has an energy band gap of 1.50 to 1.56 eV, which is higher than that of either silicon or germanium. The name Boron originates from a combination of carbon and the Arabic word buraqu meaning borax.

TODAY'S TOP DISCOVERY!

November 25, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions