Cesium Oxide Sputtering Target

CAS #:

Linear Formula:

Cs2O

MDL Number:

N/A

EC No.:

243-679-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(3N) 99.9% Cesium Oxide Sputtering Target
CS-OX-03-ST
Pricing > SDS > Data Sheet >
(4N) 99.99% Cesium Oxide Sputtering Target
CS-OX-04-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Cesium Oxide Sputtering Target
CS-OX-05-ST
Pricing > SDS > Data Sheet >

Cesium Oxide Sputtering Target Properties (Theoretical)

Compound Formula Cs2O
Molecular Weight 281.81
Appearance Yellow to Orange Crystalline Solid
Melting Point 490° C (914° F)
Boiling Point 400 °C (decomposes)
Density 4650 kg/m-3
Solubility in H2O N/A
Exact Mass 282.814 g/mol
Monoisotopic Mass 282.814 g/mol
Charge 1

Cesium Oxide Sputtering Target Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/24/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Cesium Oxide Sputtering Target

Product Number: All applicable American Elements product codes, e.g. CS-OX-03-ST , CS-OX-04-ST , CS-OX-05-ST

CAS #: 20281-00-9

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:
May cause skin irritation and/or dermatitis
Principle routes of exposure:
Skin
Inhalation:
May cause irritation of respiratory tract
Ingestion:
May be harmful if swallowed.
Skin contact:
May cause allergic skin reaction
Eye contact:
Avoid contact with eyes
Statements of hazard
MAY CAUSE ALLERGIC SKIN REACTION.
Statement of Spill or Leak - ANSI Label
Eliminate all ignition sources. Absorb and/or contain spill with inert materials (e.g., sand, vermiculite). Then place in appropriate container. For large spills, use water spray to disperse vapors, flush spill area. Prevent runoff from entering waterways or sewers.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Components
CESIUM OXIDE
CAS Number
20881-00-9
OSHA Exposure Limits:
None


SECTION 4. FIRST AID MEASURES

General advice:
In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Inhalation:
Move to fresh air. Call a physician immediately.
Skin contact:
Rinse immediately with plenty of water and seek medical advice
Ingestion:
Do not induce vomiting without medical advice.
Eye contact:
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Protection of first-aiders:
No data available
Medical conditions aggravated by exposure:
None known


SECTION 5. FIREFIGHTING MEASURES

Suitable extinguishing media:
Use dry chemical, CO2, water spray or "alcohol" foam
Specific hazards:
Burning produces irritant fumes.
Unusual hazards:
None known
Special protective equipment for firefighters:
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear
Specific methods:
Water mist may be used to cool closed containers.
Flash point: No data available
Autoignition temperature: No data available
NFPA rating:
NFPA Health: 1
NFPA Flammability: 1
NFPA Reactivity: 0


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions:
Use personal protective equipment.
Environmental precautions:
Prevent product from entering drains.
Methods for cleaning up:
Sweep up and shovel into suitable containers for disposal.


SECTION 7. HANDLING AND STORAGE

Storage:
ROOM TEMPERATURE
Handling:
Use only in area provided with appropriate exhaust ventilation.
Safe handling advice:
Wear personal protective equipment.
Incompatible products:
Oxidising and spontaneously flammable products


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering measures:
Ensure adequate ventilation.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection:
Breathing apparatus only if aerosol or dust is formed.
Hand protection:
Pvc or other plastic material gloves
Skin and body protection:
Usual safety precautions while handling the product will provide adequate protection against
this potential effect.
Eye protection:
Safety glasses with side-shields
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Formula: Cs2O
Molecular weight: 281.8102
Melting point/range: No data available at this time.
Boiling point/range: No Data available at this time.
Density: No data available
Vapor pressure: No data available
Evaporation rate: No data available
Vapor density: No data available
Solubility (in water): No data available
Flash point: No data available
Autoignition temperature: No data available


SECTION 10. STABILITY AND REACTIVITY

Stability:
Stable under recommended storage conditions.
Polymerization:
None under normal processing.
Hazardous decomposition products:
Thermal decomposition can lead to release of irritating gases and Vapors such as carbon oxides.
Materials to avoid:
Strong oxidising agents
Conditions to avoid:
Exposure to air or moisture over prolonged periods.


SECTION 11. TOXICOLOGICAL INFORMATION

Product Information
Acute toxicity
Components
CESIUM OXIDE
RTECS Number: Not Available
Selected LD50s and LC50s: No data available
Chronic toxicity:
Chronic exposure may cause nausea and vomiting, higher exposure causes unconsciousness.
Local effects:
Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.
Specific effects:
May include moderate to severe erythema (redness) and moderate edema (raised skin), nausea, vomiting, headache.
Primary irritation:
No data is available on the product itself.
Carcinogenic effects:
No data is available on the product itself.
Mutagenic effects:
No data is available on the product itself.
Reproductive toxicity:
No data is available on the product itself.


SECTION 12. ECOLOGICAL INFORMATION

Mobility: No data available
Bioaccumulation: No data available
Ecotoxicity effects: No data available
Aquatic toxicity: May cause long-term adverse effects in the aquatic environment.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste from residues / unused products:
Waste disposal must be in accordance with appropriate
Federal, State, and local regulations. This product, if unaltered by use, may be disposed of by treatment at a permitted facility or as advised by your local hazardous waste regulatory authority. Residue from fires extinguished with this material may be hazardous.
Contaminated packaging:
Do not re-use empty containers


SECTION 14. TRANSPORT INFORMATION

DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods


SECTION 15. REGULATORY INFORMATION

SARA 313 Notification:
The above is your notification as to the SARA 313 listing for this product(s) pursuant to Section 313 of Title III of the Superfund Ammendments and Reauthorization Act of
1986 and 40 CFR Part 372. If you are unsure if you are subject to the reporting requirements of Section 313, or need more information, please call the EPA Emergency Planning and Community
Right-To-Know Information Hotline: (800) 535-0202 or (202) 479-2499 (in Washington, DC or Alaska).
State Notification:
The above information is your notice as to the Right-to-Know listings of the stated product(s). Individual states will list chemicals for a variety of reasons including, but not limited to, the compounds toxicity; carcinogenic, tumorigenic and/or reproductive hazards; and the compounds environmental impact if accidentally released.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Cesium Oxide Sputtering Target

Oxide IonAmerican Elements specializes in producing high purity Cesium Oxide Sputtering Targets with the highest possible density High Purity (99.99%) Cesium Oxide Sputtering Targetand smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. We offer all shapes and configurations of targets compatible with all standard guns including circular, rectangular, annular, oval, "dog-bone," rotatable (rotary), multi-tiled and others in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Cesium Oxide as rods, powder and plates. Oxide compounds are not conductive to electricity. However, certain perovskite structured oxides are electronically conductive finding application in the cathode of solid oxide fuel cells and oxygen generation systems. Other shapes are available by request.

Cesium Oxide Sputtering Target Synonyms

Dicesium oxygen(-2) anion, Dicesium oxide

Chemical Identifiers

Linear Formula Cs2O
MDL Number N/A
EC No. 243-679-0
Beilstein/Reaxys No. N/A
Pubchem CID 88456
IUPAC Name Dicesiumoxide
SMILES [Cs+].[Cs+].[O-2]
InchI Identifier InChI=1S/2Cs.O/q2*+1;-2
InchI Key KOPBYBDAPCDYFK-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

Cesium

See more Cesium products. Cesium (or Caesium) (atomic symbol: Ce, atomic number: 55) is a Block S, Group 1, Period 6 element with an atomic weight of 132.9054519. The number of electrons in each of Cesium's shells is 2, 8, 18, 18, 8, 1 and its electron configuration is [Xe]6s1. Cesium Bohr ModelThe cesium atom has a radius of 265 pm and a Van der Waals radius of 343 pm. Cesium is a member of the alkali group of metals. It is one of three metals that occur as a liquid at room temperature, the others being mercury and gallium. Elemental CesiumCesium's main commercial source is pollucite ore; however, it is also found in beryl, avogadrite, pezzottaite, and londonite. Cesium was discovered by Robert Bunsen and Gustav Kirchhoff in 1860 and first isolated by Carl Setterberg in 1882. In its elemental form, cesium has a silvery gold appearance. The word Cesium originates from the Latin word "caesius," meaning "sky blue," which refers to the vibrant blue lines in its spectrum.

TODAY'S TOP DISCOVERY!

November 24, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions