View the history of American Elements on Wikipedia

Copper(II) Telluride Sputtering Target

CAS #:

12019-23-7

Linear Formula:

CuTe

MDL Number:

MFCD00049813

EC No.:

234-644-0

View the history of American Elements on Wikipedia

ORDER

PRODUCT	Product Code	ORDER	SAFETY DATA	TECHNICAL DATA
(2N) 99% Copper(II) Telluride Sputtering Target	CU2-TE-02-ST	Pricing >	SDS >	Data Sheet >
(2N5) 99.5% Copper(II) Telluride Sputtering Target	CU2-TE-025-ST	Pricing >	SDS >	Data Sheet >
(3N) 99.9% Copper(II) Telluride Sputtering Target	CU2-TE-03-ST	Pricing >	SDS >	Data Sheet >
(3N5) 99.95% Copper(II) Telluride Sputtering Target	CU2-TE-035-ST	Pricing >	SDS >	Data Sheet >
(4N) 99.99% Copper(II) Telluride Sputtering Target	CU2-TE-04-ST	Pricing >	SDS >	Data Sheet >
(5N) 99.999% Copper(II) Telluride Sputtering Target	CU2-TE-05-ST	Pricing >	SDS >	Data Sheet >

Question? Ask an American Elements Materials Science Engineer

Copper(II) Telluride Sputtering Target Properties (Theoretical)

Compound Formula	CuTe
Molecular Weight	191.15
Appearance	Crystalline
Melting Point	1125 °C (607 °F)
Boiling Point	N/A
Density	7.1 g/cm³
Solubility in H2O	N/A
Exact Mass	192.836
Monoisotopic Mass	192.836

Copper(II) Telluride Sputtering Target Health & Safety Information

Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

View and Print SDS

Print to PDF

SAFETY DATA SHEET

Date Accessed: 12/21/2024

Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Copper(II) Telluride Sputtering Target

Product Number: All applicable American Elements product codes, e.g. CU2-TE-02-ST , CU2-TE-025-ST , CU2-TE-03-ST , CU2-TE-035-ST , CU2-TE-04-ST , CU2-TE-05-ST

CAS #: 12019-23-7

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887

SECTION 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
Not a hazardous substance or mixture.
2.2 GHS Label elements, including precautionary statements
Not a hazardous substance or mixture.
2.3 Hazards not otherwise classified (HNOC) or not covered by GHS - none

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances
Formula : CuTe
Molecular weight : 191.15 g/mol
CAS-No. : 12019-23-7
EC-No. : 234-644-0
Hazardous components
Component Classification Concentration
Copper telluride
<= 100 %

SECTION 4. FIRST AID MEASURES

4.1 Description of first aid measures
General advice
Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available

SECTION 5. FIREFIGHTING MEASURES

5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Tellurium oxides, Copper oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available

SECTION 6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing Vapors, mist or gas.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.

SECTION 7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters
Components with workplace control parameters
8.1 Control parameters
Components with workplace control parameters

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
a) Appearance Form: crystalline
Colour: yellow
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available
9.1 Information on basic physical and chemical properties
a) Appearance Form: crystalline
Colour: yellow
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available

SECTION 10. STABILITY AND REACTIVITY

10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5

SECTION 11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects
Acute toxicity
No data available
Inhalation: No data available
Dermal: No data available
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity
No data available
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
Nausea, Weakness, To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Stomach - Irregularities - Based on Human Evidence
Stomach - Irregularities - Based on Human Evidence

SECTION 12. ECOLOGICAL INFORMATION

12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
No data available

SECTION 13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14. TRANSPORT INFORMATION

DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods

SECTION 15. REGULATORY INFORMATION

SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
The following components are subject to reporting levels established by SARA Title III, Section 313:
Copper telluride
CAS-No.
12019-23-7
Revision Date
2007-07-01
SARA 311/312 Hazards
Chronic Health Hazard
Massachusetts Right To Know Components
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components
Copper telluride
CAS-No.
12019-23-7
Revision Date
2007-07-01
New Jersey Right To Know Components
Copper telluride
CAS-No.
12019-23-7
Revision Date
2007-07-01
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other
reproductive harm.

SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

Print this page

About Copper(II) Telluride Sputtering Target

American Elements specializes in producing high purity Copper Telluride Sputtering targets with the highest possible density

High Purity (99.99%) Copper Telluride Sputtering Target

and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. We offer all shapes and configurations of targets compatible with all standard guns including circular, rectangular, annular, oval, "dog-bone," rotatable (rotary), multi-tiled and others in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes. We also produce Copper as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.

Copper(II) Telluride Sputtering Target Synonyms

Copper monotelluride, Cupric telluride, Telluroxocopper, Copper(2+) telluride

Chemical Identifiers

Linear Formula	CuTe
MDL Number	MFCD00049813
EC No.	234-644-0
Beilstein/Reaxys No.	N/A
Pubchem CID	82801
IUPAC Name	tellanylidenecopper
SMILES	[Cu]=[Te]
InchI Identifier	InChI=1S/Cu.Te
InchI Key	QZCHKAUWIRYEGK-UHFFFAOYSA-N

Customers For Copper(II) Telluride Sputtering Target Have Also Viewed

Copper(I) Telluride Sputtering Target	Copper(II) Telluride	Germanium Arsenide Selenide Telluride Sputtering Target
Copper Telluride Cu4Te3	Lead Telluride-Silver Antimony Telluride Sputtering Target	Germanium Copper Telluride Sputtering Target
Silver Bismuth Telluride Sputtering Target	Zinc Bismuth Telluride Sputtering Target	Germanium Antimony Selenide Telluride Sputtering Target

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

Copper

29 Cu 63.546000000 Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d¹⁰ 4s¹. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copper has a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Tellurium

52 Te 127.600000000 Tellurium

See more Tellurium products. Tellurium (atomic symbol: Te, atomic number: 52) is a Block P, Group 16, Period 5 element with an atomic radius of 127.60. Tellurium Bohr Model The number of electrons in each of tellurium's shells is 2, 8, 18, 18, 6 and its electron configuration is [Kr] 4d¹⁰ 5s² 5p⁴. Tellurium was discovered by Franz Muller von Reichenstein in 1782 and first isolated by Martin Heinrich Klaproth in 1798. In its elemental form, tellurium has a silvery lustrous gray appearance. The tellurium atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Elemental Tellurium Tellurium is most commonly sourced from the anode sludges produced as a byproduct of copper refining. The name Tellurium originates from the Greek word Tellus, meaning Earth.