Dibutyltin Dilaurate

DBTDL

CAS #:

Linear Formula:

(C4H9)2Sn(OOCC11H23)2

MDL Number:

MFCD00008963

EC No.:

201-039-8

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Dibutyltin Dilaurate
DBSN-LAT2-01-LIQ
Pricing > SDS > Data Sheet >

Dibutyltin Dilaurate Properties (Theoretical)

Compound Formula C32H64O4Sn
Molecular Weight 631.56
Appearance Yellow liquid
Melting Point 22-24 °C
Boiling Point 205 °C
Density 1.066 g/mL
Solubility in H2O N/A
Exact Mass 632.382655
Monoisotopic Mass 632.382655

Dibutyltin Dilaurate Health & Safety Information

Signal Word Danger
Hazard Statements H301+H331-H315-H319-H361-H335
Hazard Codes T+
Precautionary Statements P280-P261-P301+P310-P305+P351+P338-P403+P233-P501
Risk Codes 25-26-36/38-43-50/53
Safety Statements 26-28-36/37-45-60-61
RTECS Number WH7000000
Transport Information UN 2788 6.1 / PGII
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/27/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Dibutyltin Dilaurate

Product Number: All applicable American Elements product codes, e.g. DBSN-LAT2-01-LIQ

CAS #: 77-58-7

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

· Classification of the substance or mixture
GHS06 Skull and crossbones
Acute Tox. 3 H301 Toxic if swallowed.
Acute Tox. 3 H331 Toxic if inhaled.
GHS08 Health hazard
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.
· Label elements
· GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
· Hazard pictograms

Skull and Crossbones - GHS06 Exclamation Mark - GHS07 Health Hazard - GHS08

· Signal word Danger
· Hazard-determining components of labeling:
dibutyltin dilaurate
· Hazard statements
H301+H331 Toxic if swallowed or if inhaled.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H361 Suspected of damaging fertility or the unborn child.
H335 May cause respiratory irritation.
· Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

· Chemical characterization: Substances
· CAS No. Description
77-58-7 dibutyltin dilaurate
· Identification number(s)
· EC number: 201-039-8


SECTION 4. FIRST AID MEASURES

· Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
Remove breathing apparatus only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
· After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: Do not induce vomiting; immediately call for medical help.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed No further relevant information available.
· Indication of any immediate medical attention and special treatment needed
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

· Extinguishing media
· Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: Mouth respiratory protective device.


SECTION 6. ACCIDENTAL RELEASE MEASURES

· Personal precautions, protective equipment and emergency procedures Not required.
· Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

· Handling:
· Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
· Information about protection against explosions and fires: Keep respiratory protective device available.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Keep receptacle tightly sealed.
· Specific end use(s) No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
· Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
· Protection of hands:
Gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection:
Tightly sealed goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Liquid
Color: Yellow
· Odor: Odorless
· Odor threshold: Not determined.
· pH-value: Not determined.
· Change in condition
Melting point/Melting range: 24 °C (75 °F)
Boiling point/Boiling range: no data °C
· Flash point: Not applicable.
· Flammability (solid, gaseous): Not determined.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto igniting: Not determined.
· Danger of explosion: Product does not present an explosion hazard.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapor pressure: no data hPa
· Density at 20 °C (68 °F): 1.066 g/cm³ (8.896 lbs/gal)
· Relative density Not determined.
· Vapor density Not determined.
· Evaporation rate Not determined.
· Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
· Other information No further relevant information available.


SECTION 10. STABILITY AND REACTIVITY

· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid No further relevant information available.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
Oral LD50 175 mg/kg (rat)
77-58-7 dibutyltin dilaurate
Oral LD50 175 mg/kg (rat)
· Primary irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
Substance is not listed.
· NTP (National Toxicology Program)
Substance is not listed.
· OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes: Not known to be hazardous to water.
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

· Waste treatment methods
· Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

· UN-Number
· DOT, IMDG, IATA UN2788
· UN proper shipping name
· DOT, IATA Organotin compounds, liquid, n.o.s.
· IMDG ORGANOTIN COMPOUND, LIQUID, N.O.S.
· Transport hazard class(es)
· DOT
· Class 6.1 Toxic substances
· Label 6.1
· IMDG, IATA
· Class 6.1 Toxic substances
· Label 6.1
· Packing group
· DOT, IMDG, IATA III
· Environmental hazards:
· Marine pollutant: No
· Special precautions for user Not applicable.
· Danger code (Kemler): 60
· EMS Number: F-A,S-A
· Stowage Category A
· Stowage Code SW2 Clear of living quarters.
· Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
· Transport/Additional information:
· DOT
· Quantity limitations On passenger aircraft/rail: 60 L
On cargo aircraft only: 220 L
· IMDG
· Limited quantities (LQ) 5L
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN "Model Regulation": UN 2788 ORGANOTIN COMPOUNDS, LIQUID, N.O.S., 6.1, III


SECTION 15. REGULATORY INFORMATION

· Safety, health and environmental regulations/legislation specific for the substance or mixture
· Sara
· Section 355 (extremely hazardous substances):
Substance is not listed.
· Section 313 (Specific toxic chemical listings):
Substance is not listed.
· TSCA (Toxic Substances Control Act):
Substance is listed.
· Proposition 65
· Chemicals known to cause cancer:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
· Chemicals known to cause developmental toxicity:
Substance is not listed.
· Carcinogenic categories
· EPA (Environmental Protection Agency)
Substance is not listed.
· TLV (Threshold Limit Value established by ACGIH)
77-58-7 dibutyltin dilaurate A4
· NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Dibutyltin Dilaurate

Dibutyltin Dilaurate iis one of numerous organo-metallic compounds sold by American Elements under the trade name AE Organo-Metallics™ for usessuch as catalysis. American Elements can produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and new proprietary technologies. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional research, technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Dibutyltin Dilaurate Synonyms

DBTL , DBTDL, di-n-butyldilauryltin, Dibutyltin laurate, T 12 (catalyst), Dibutylbis(laurato)tin, Dibutyltin didodecanoate, Dibutyltin n-dodecanoate Dibutylbis(lauroyloxy)tin, Dibutylstannylene dilaurate, Bis(lauroyloxy)di(n-butyl)stannane, FASCAT 4202

Chemical Identifiers

Linear Formula (C4H9)2Sn(OOCC11H23)2
MDL Number MFCD00008963
EC No. 201-039-8
Beilstein/Reaxys No. 4156980
Pubchem CID 16682738
IUPAC Name [dibutyl(dodecanoyloxy)stannyl] dodecanoate
SMILES CCCCCCCCCCCC(=O)O[Sn](CCCC)(CCCC)OC(=O)CCCCCCCCCCC
InchI Identifier InChI=1S/2C12H24O2.2C4H9.Sn/c2*1-2-3-4-5-6-7-8-9-10-11-12(13)14;2*1-3-4-2;/h2*2-11H2,1H3,(H,13,14);2*1,3-4H2,2H3;/q;;;;+2/p-2
InchI Key UKLDJPRMSDWDSL-UHFFFAOYSA-L

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

TODAY'S TOP DISCOVERY!

November 27, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions