Indium(III) Telluride

CAS #:

Linear Formula:

In2Te3

MDL Number:

MFCD00016148

EC No.:

215-194-4

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(5N) 99.999% Indium Telluride Ingot
IN-TE-05-I
Pricing > SDS > Data Sheet >
(5N) 99.999% Indium Telluride Lump
IN-TE-05-L
Pricing > SDS > Data Sheet >
(5N) 99.999% Indium Telluride Powder
IN-TE-05-P
Pricing > SDS > Data Sheet >
(5N) 99.999% Indium Telluride Sputtering Target
IN-TE-05-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Indium Telluride Wafer
IN-TE-05-WF
Pricing > SDS > Data Sheet >

Indium(III) Telluride Properties (Theoretical)

Compound Formula In2Te3
Molecular Weight 612.44
Appearance Blue to black crystals, powder, or solid in various forms
Melting Point 667 °C (1233 °F)
Boiling Point N/A
Density 5.8 g/cm3
Solubility in H2O N/A
Crystal Phase / Structure Cubic
Thermal Conductivity 6.90 W/m-K
Exact Mass 613.52175 g/mol
Monoisotopic Mass 619.526426 g/mol
Charge N/A

Indium(III) Telluride Health & Safety Information

Signal Word Warning
Hazard Statements H302+H312+H332-H315-H319-H335
Hazard Codes Xi
Precautionary Statements P261-P264-P270-P271-P280-P301+P312+P302+P352-P304+P340-P305+P351+P338-P403+P233
Risk Codes 20/21/22-36/37/38
Safety Statements 26-36
RTECS Number N/A
Transport Information NONH for all modes of transport
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/21/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Indium(III) Telluride

Product Number: All applicable American Elements product codes, e.g. IN-TE-05-I , IN-TE-05-L , IN-TE-05-P , IN-TE-05-ST , IN-TE-05-WF

CAS #: 1312-45-4

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

CLASSIFICATION OF SUBSTANCE OR MIXTURE
Pictogram

Exclamation Mark - GHS07

Signal Word Warning
Hazard Statements
H302+H312+H332 Harmful if swallowed, in contact with skin, or if inhaled.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary Phrases
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink, or smoke, when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/eye protection/face protection.
P301+P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
HMIS CLASSIFICATION:
Health: 2 Fire: 0 Reactivity Hazard: 0
NFPA RATING:
Health: 2 Flammability: 0 Reactivity Hazard: 0
EYE CONTACT: Causes serious eye irritation.
SKIN CONTACT: Causes skin irritation.
INHALATION: May cause respiratory irritation.
INGESTION: Harmful if swallowed.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Formula: In2Te3
Molecular Weight: 612.44
CHEMICAL NAME CAS# %
Indium (III) Telluride 1312-45-4 100


SECTION 4. FIRST AID MEASURES

EYE EXPOSURE: In case of eye contact, flush the eye with plenty of water for at least 15 minutes and seek medical attention.
SKIN EXPOSURE: Immediately wash with plenty soap and water. Get medical attention.
INHALATION: Remove to fresh air and keep at rest. If breathing is difficult, give oxygen. If not breathing, give artificial
respiration. Get medical attention.
INGESTION: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If conscious, wash out mouth
with water. Get medical attention.


SECTION 5. FIREFIGHTING MEASURES

FLASH POINT: Product is not flammable
Autoignition: Not available
EXPLOSION LIMITS: Not available
EXTINGUISHING MEDIUM: Use fire fighting measures that suit the surrounding fire.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained, approved breathing apparatus and full protective clothing,
including eye protection and boots.
HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Tellurium oxides and indium oxides


SECTION 6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Wear all appropriate equipment when using this material. Ensure adequate ventilation. Avoid dust
formation. Avoid breathing dust.
ENVIRONMENTAL PRECAUTIONS: Prevent spillage from entering drains or allowing to be released into the environment.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Sweep up and place in tightly sealed container for proper
disposal.


SECTION 7. HANDLING AND STORAGE

PRECAUTIONS FOR SAFE HANDLING: Wear appropriate personal protective equipment. Ensure adequate ventilation. Avoid contact
with skin and eyes.
CONDITIONS FOR SAFE STORAGE: Store in cool, dry, and well-ventilated area.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

EXPOSURE CONTROLS:
Component Exposure Limits Basis Entity
Indium (III) Telluride 0.1 mg/m3 TWA OSHA
0.1 mg/m3 TLV ACGIH
0.1 mg/m3 TWA NIOSH
TLV: Threshold Limit Value over 8 hours of work. TWA: Time Weighted Average over 8 hours of work.
EYE PROTECTION: Wear chemical safety glasses or goggles and face shield.
SKIN PROTECTION: Wear nitrile or rubber gloves, and a complete suit protecting against chemicals.
VENTILATION: Provide local exhaust, preferably mechanical.
RESPIRATOR: Use an approved respirator.
ADDITIONAL PROTECTION: Provide eyewash stations, quick-drench showers and washing facilities accessible to areas of use and
handling.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

COLOR AND FORM: Black solid
ODOR: None
MOLECULAR WEIGHT: 612.44
BOILING POINT: No data available
MELTING POINT: 667° C
SPECIFIC GRAVITY: 5.8 gm/ml
VAPOR DENSITY: No data available
SOLUBILITY: Insoluble


SECTION 10. STABILITY AND REACTIVITY

STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID: None
INCOMPATIBILITY: Strong oxidizing agents, sulfur compounds, and strong acids.
DECOMPOSITION PRODUCTS: Tellurium oxides and indium oxides


SECTION 11. TOXICOLOGICAL INFORMATION

ACUTE TOXICITY: Not available
CARCINOGENIC EFFECTS: No components of this product are identified as being a human carcinogen.
MUTAGENIC EFFECTS: Not available
TETRATOGENIC EFFECTS: Not available
CHRONIC TOXICITY: Not available
RTECS: No data
To the best of our knowledge the toxicological effects of this compound have not been fully investigated.


SECTION 12. ECOLOGICAL INFORMATION

No data available


SECTION 13. DISPOSAL CONSIDERATIONS

Dispose of in according to local, state, and federal regulations


SECTION 14. TRANSPORT INFORMATION

Not a dangerous good


SECTION 15. REGULATORY INFORMATION

SARA 302/304: Not Listed
SARA 311/312: Acute Health Hazard
SARA (TITLE 313): Not listed
CALIFORNIA PROP. 65: Not Listed
MASSACHUSETTS RIGHT TO KNOW COMPONENTS: No components are subject to the Massachusetts Right to Know Act.
NEW JERSEY RIGHT TO KNOW COMPONENTS: Indium (III) Telluride
PENNSYLVANIA RIGHT TO KNOW COMPONENTS: Indium (III) Telluride


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Indium(III) Telluride

Telluride IonIndium Telluride is a crystalline solid used as a semiconductor and in photo optic applications. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Indium(III) Telluride Synonyms

Indium(3+) tritelluride; telluroxoindium; In2Te, InTe3

Chemical Identifiers

Linear Formula In2Te3
MDL Number MFCD00016148
EC No. 215-194-4
Beilstein/Reaxys No. N/A
Pubchem CID 6383318
IUPAC Name tellanylideneindium; tellurium
SMILES [In]=[Te].[In]=[Te].[Te]
InchI Identifier InChI=1S/2In.3Te
InchI Key TWZRXWXUSGBTAD-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Indium

See more Indium products. Indium (atomic symbol: In, atomic number: 49) is a Block P, Group 13, Period 5 element with an atomic weight of 114.818. The number of electrons in each of indium's shells is [2, 8, 18, 18, 3] and its electron configuration is [Kr] 4d10 5s2 5p1. The indium atom has a radius of 162.6 pm and a Van der Waals radius of 193 pm. Indium was discovered by Ferdinand Reich and Hieronymous Theodor Richter in 1863. Indium Bohr ModelIt is a relatively rare, extremely soft metal is a lustrous silvery gray and is both malleable and easily fusible. It has similar chemical properties to Elemental Indiumgallium such as a low melting point and the ability to wet glass. Fields such as optics and microelectronics that utilize semiconductor technology have wide uses for indium, especially in the form of Indiun Tin Oxide (ITO). Thin films of Copper Indium Gallium Selenide (CIGS) are used in high-performing solar cells. Indium's name is derived from the Latin word indicum, meaning violet.

Tellurium

See more Tellurium products. Tellurium (atomic symbol: Te, atomic number: 52) is a Block P, Group 16, Period 5 element with an atomic radius of 127.60. Tellurium Bohr ModelThe number of electrons in each of tellurium's shells is 2, 8, 18, 18, 6 and its electron configuration is [Kr] 4d10 5s2 5p4. Tellurium was discovered by Franz Muller von Reichenstein in 1782 and first isolated by Martin Heinrich Klaproth in 1798. In its elemental form, tellurium has a silvery lustrous gray appearance. The tellurium atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Elemental TelluriumTellurium is most commonly sourced from the anode sludges produced as a byproduct of copper refining. The name Tellurium originates from the Greek word Tellus, meaning Earth.

TODAY'S TOP DISCOVERY!

November 21, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions