Tetrabutyltin

CAS #:

Linear Formula:

(C4H12)4Sn

MDL Number:

MFCD00009422

EC No.:

215-960-8

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Tetrabutyltin
4BUT-SN-02
Pricing > SDS > Data Sheet >
(3N) 99.9% Tetrabutyltin
4BUT-SN-03
Pricing > SDS > Data Sheet >
(4N) 99.99% Tetrabutyltin
4BUT-SN-04
Pricing > SDS > Data Sheet >
(5N) 99.999% Tetrabutyltin
4BUT-SN-05
Pricing > SDS > Data Sheet >

Tetrabutyltin Properties (Theoretical)

Compound Formula C16H36Sn
Molecular Weight 347.17
Appearance Colorless Liquid
Melting Point −97 °C
Boiling Point 145 °C
Density 1.057 g/mL (25 °C)
Solubility in H2O N/A
Exact Mass 348.183896
Monoisotopic Mass 348.183896

Tetrabutyltin Health & Safety Information

Signal Word Danger
Hazard Statements H301-H312-H315-H319-H372-H410
Hazard Codes T,N
Risk Codes 21-25-36/38-48/23/25-50/53
Safety Statements 35-36/37/39-45-60-61
RTECS Number N/A
Transport Information UN 1760 8/PG 2
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/23/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Tetrabutyltin

Product Number: All applicable American Elements product codes, e.g. 4BUT-SN-02 , 4BUT-SN-03 , 4BUT-SN-04 , 4BUT-SN-05

CAS #: 1461-25-2

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Acute toxicity, Oral (Category 3), H301
Acute toxicity, Dermal (Category 4), H312
Skin irritation (Category 2), H315
Eye irritation (Category 2A), H319
Specific target organ toxicity - repeated exposure (Category 1), H372
Acute aquatic toxicity (Category 1), H400
Chronic aquatic toxicity (Category 1), H410

2.2 GHS Label elements, including precautionary statements

Skull and Crossbones - GHS06Health Hazard - GHS08Environment - GHS09

Pictogram
Signal word Danger
Hazard statement(s)
H301 Toxic if swallowed.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H372 Causes damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P260 Do not breathe dust/ fume/ gas/ mist/ Vapors/ spray.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280 Wear protective gloves/ eye protection/ face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P314 Get medical advice/ attention if you feel unwell.
P322 Specific measures (see supplemental first aid instructions on this label).
P330 Rinse mouth.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse.
P391 Collect spillage.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.
2.3 Hazards not otherwise classified (HNOC) or not covered by GHS - none


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances
Synonyms : Tin tetrabutyl
Formula : C16H36Sn
Molecular weight : 347.17 g/mol
CAS-No. : 1461-25-2
EC-No. : 215-960-8
Index-No. : 050-008-00-3
Hazardous components
Component Classification Concentration
Tetrabutyltin
Acute Tox. 3; Acute Tox. 4;
Skin Irrit. 2; Eye Irrit. 2A;
STOT RE 1; Aquatic Acute 1;
Aquatic Chronic 1; H301,
H312, H315, H319, H372,
H410
<= 100 %


SECTION 4. FIRST AID MEASURES

4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Nature of decomposition products not known.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available


SECTION 6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid breathing Vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel
to safe areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment
must be avoided.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for
disposal.
6.4 Reference to other sections
For disposal see section 13.


SECTION 7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of Vapor or mist.
Normal measures for preventive fire protection.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully
resealed and kept upright to prevent leakage.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters
Components with workplace control parameters
Component CAS-No. Value Control
parameters
Basis
Tetrabutyltin 1461-25-2 TWA 0.100000
mg/m3
USA. Occupational Exposure Limits
(OSHA) - Table Z-1 Limits for Air
Contaminants
TWA 0.100000
mg/m3
USA. ACGIH Threshold Limit Values
(TLV)
Remarks Not classifiable as a human carcinogen
Danger of cutaneous absorption
varies
STEL 0.200000
mg/m3
USA. ACGIH Threshold Limit Values
(TLV)
Not classifiable as a human carcinogen
Danger of cutaneous absorption
varies
TWA 0.100000
mg/m3
USA. NIOSH Recommended
Exposure Limits
Also see specific listing for Cyhexatin.
Potential for dermal absorption
TWA 0.1 mg/m3 USA. Occupational Exposure Limits
(OSHA) - Table Z-1 Limits for Air
Contaminants
TWA 0.1 mg/m3 USA. ACGIH Threshold Limit Values
(TLV)
Central nervous system
Immune effects
Upper Respiratory Tract irritation
Headache
Eye irritation
Nausea
Not classifiable as a human carcinogen
Danger of cutaneous absorption
varies
STEL 0.2 mg/m3 USA. ACGIH Threshold Limit Values
(TLV)
Central nervous system
Immune effects
Upper Respiratory Tract irritation
Headache
Eye irritation
Nausea
Not classifiable as a human carcinogen
Danger of cutaneous absorption
varies
TWA 0.1 mg/m3 USA. NIOSH Recommended
Exposure Limits
Also see specific listing for Cyhexatin.
Potential for dermal absorption
8.2 Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after
use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to
the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose
combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.
If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and
components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
a) Appearance Form: clear, liquid
Colour: colourless
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available
e) Melting point/freezing
point
Melting point/range: -97 °C (-143 °F)
f) Initial boiling point and
boiling range
245 - 247 °C (473 - 477 °F) at 1,013 hPa (760 mmHg)
127 - 145 °C (261 - 293 °F) at 13 hPa (10 mmHg)
g) Flash point 107 °C (225 °F) - closed cup
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower
flammability or
explosive limits
No data available
k) Vapor pressure No data available
l) Vapor density No data available
m) Relative density 1.054 g/cm3
n) Water solubility No data available
o) Partition coefficient: noctanol/
water
No data available
p) Auto-ignition
temperature
No data available
q) Decomposition
temperature
No data available
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
9.2 Other safety information
No data available


SECTION 10. STABILITY AND REACTIVITY

10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agentsStrong oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5


SECTION 11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 1,268 mg/kg
Remarks: Behavioral:Somnolence (general depressed activity). Diarrhoea Nutritional and Gross Metabolic:Weight loss
or decreased weight gain.
Inhalation: No data available
LD50 Intravenous - Mouse - 56 mg/kg
Skin corrosion/irritation
Serious eye damage/eye irritation
Eyes - Rabbit
Respiratory or skin sensitisation
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity
No data available
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard
No data available
Additional Information
RTECS: Not available
General signs of toxicity for overexposure to tetraalkyl tin compounds include muscular weakness and paralysis,
leading to respiratory failure, tremors, convulsive movements, closure of the eyelids, and photophobia. Histologically,
tetraalkyl tin compounds show a decrease in cytoplasmic basophilia of the liver, chromatolysis of the Purkinje cells of
the cerebellum, and increase in the water content of the brain and spinal cord., Material is extremely destructive to
tissue of the mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the
larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation, Cough,
wheezing, laryngitis, Shortness of breath, Headache


SECTION 12. ECOLOGICAL INFORMATION

12.1 Toxicity
Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 0.045 mg/l - 96.0 h
Toxicity to daphnia and
other aquatic
invertebrates
EC50 - Daphnia magna (Water flea) - 0.002 mg/l - 24 h
Toxicity to algae Growth inhibition EC50 - Skeletonema costatum - 0.017 mg/l - 72 h
12.2 Persistence and degradability
Biodegradability Biotic/Aerobic - Exposure time 28 d
Result: < 10 % - Not readily biodegradable.
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Very toxic to aquatic life with long lasting effects.


SECTION 13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Product
Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and
non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
UN number: 1760 Class: 8 Packing group: II
Proper shipping name: Corrosive liquids, n.o.s. (Tetrabutyltin)
Poison Inhalation Hazard: No
IMDG
UN number: 1760 Class: 8 Packing group: II EMS-No: F-A, S-B
Proper shipping name: CORROSIVE LIQUID, N.O.S. (Tetrabutyltin)
IATA
UN number: 1760 Class: 8 Packing group: II
Proper shipping name: Corrosive liquid, n.o.s. (Tetrabutyltin)


SECTION 15. REGULATORY INFORMATION

SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De
Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards
Acute Health Hazard
Massachusetts Right To Know Components
Tetrabutyltin
CAS-No.
1461-25-2
Revision Date
1993-04-24
Pennsylvania Right To Know Components
Tetrabutyltin
CAS-No.
1461-25-2
Revision Date
1993-04-24
New Jersey Right To Know Components
Tetrabutyltin
CAS-No.
1461-25-2
Revision Date
1993-04-24
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other
reproductive harm.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Tetrabutyltin

Tetrabutyltin is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Tetrabutyltin Synonyms

Tetra-n-butyltin; Tetrabutylstannane; Stannane, tetrabutyl-;

Chemical Identifiers

Linear Formula (C4H12)4Sn
MDL Number MFCD00009422
EC No. 215-960-8
Beilstein/Reaxys No. 3648237
Pubchem CID 15098
IUPAC Name tetrabutylstannane
SMILES CCCC[Sn](CCCC)(CCCC)CCCC
InchI Identifier InChI=1S/4C4H9.Sn/c4*1-3-4-2;/h4*1,3-4H2,2H3;
InchI Key AFCAKJKUYFLYFK-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

TODAY'S TOP DISCOVERY!

November 23, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions