Vanadium Telluride Sputtering Target

CAS #:

Linear Formula:

VTe2

MDL Number:

N/A

EC No.:

252-605-6

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Vanadium Telluride Sputtering Target
V-TE-02-ST
Pricing > SDS > Data Sheet >
(2N5) 99.5% Vanadium Telluride Sputtering Target
V-TE-025-ST
Pricing > SDS > Data Sheet >
(3N) 99.9% Vanadium Telluride Sputtering Target
V-TE-03-ST
Pricing > SDS > Data Sheet >
(3N5) 99.95% Vanadium Telluride Sputtering Target
V-TE-035-ST
Pricing > SDS > Data Sheet >
(4N) 99.99% Vanadium Telluride Sputtering Target
V-TE-04-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Vanadium Telluride Sputtering Target
V-TE-05-ST
Pricing > SDS > Data Sheet >

Vanadium Telluride Sputtering Target Properties (Theoretical)

Compound Formula Te2V
Molecular Weight 306.14
Appearance solid
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 308.755 g/mol
Monoisotopic Mass 310.756409 Da

Vanadium Telluride Sputtering Target Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/24/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Vanadium Telluride Sputtering Target

Product Number: All applicable American Elements product codes, e.g. V-TE-02-ST , V-TE-025-ST , V-TE-03-ST , V-TE-035-ST , V-TE-04-ST , V-TE-05-ST

CAS #: 35515-91-4

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
GHS06 Skull and crossbones
Acute Tox. 3 H331 Toxic if inhaled.
GHS07
Acute Tox. 4 H302 Harmful if swallowed.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
Xn; Harmful
R20/22: Harmful by inhalation and if swallowed.
Xi; Irritant
R36/37: Irritating to eyes and respiratory system.
Information concerning particular hazards for human and environment:
N/A
Hazards not otherwise classified
No data available
Label elements
Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labeled according to the CLP regulation.
Hazard pictograms

Skull and Crossbones - GHS06

GHS06
Signal word
Danger
Hazard statements
H302 Harmful if swallowed.
H331 Toxic if inhaled.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/
national/international regulations.
WHMIS classification
D1B - Toxic material causing immediate and serious toxic effects
D2B - Toxic material causing other toxic effects
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH
FIRE
REACTIVITY
3


Health (acute effects) = 3
Flammability = 0
Physical Hazard = 0
Other hazards
Results of PBT and vPvB assessment
PBT:
N/A


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name: Vanadium Telluride
CAS Number: 35515-91-4
EC Number: 252-605-6
Molecular Weight: 306.14


SECTION 4. FIRST AID MEASURES

Eye Contact:
Flush eyes with large amounts of water for fifteen minutes. Separate eyelids with fingers. If irritation
persists, seek medical attention.
Skin Contact:
Wash skin with soap and water. If irritation persists, seek medical attention.
Ingestion:
Do not induce vomiting. Seek medical attention.
Inhalation:
Move to a fresh air environment. Contact a physician if breathing becomes difficult.


SECTION 5. FIREFIGHTING MEASURES

Flash Point:
Not Available
Explosion Limits:
Lower: Not Available
Upper: Not Available
Autoignition:
Not Available
Extinguishing Media:
Carbon dioxide, dry chemical powder, alcohol-resistant foam or water spray.
Protective Equipment:
Wear self-contained respirator and fully protective impervious suit.
Specific Hazards:
Emits hazardous fumes under fire conditions.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Protection:
Wear a self-contained breathing apparatus, rubber boots and gloves, and disposable coveralls. Dispose of coveralls after use.
Keep unprotected persons away.
Environmental Protection:
Keep spills out of sewers and bodies of water. Dike and contain the spill with inert material. Absorb on sand, vermiculite or diatomite. Transfer material to a container for disposal or recovery. Ventilate area and wash spill site after material pickup is complete.


SECTION 7. HANDLING AND STORAGE

Handling:
Avoid breathing dust, vapor, mist or gas. Avoid contact with skin and eyes. Avoid prolonged or
repeated exposure. Use only in a chemical fume hood. Open and handle container with care. Keep
ignition sources away.
Storage:
Store in a tightly closed container in a dry, well-ventilated place.
Storage Temperature:
15-30 ºC


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Eyes:
Wear appropriate protective eyeglass or chemical safety goggles. Eyewash facility in vicinity.
Skin:
Wear impervious gloves and protective clothing.
Respiratory:
Use a NIOSH approved respirator when exposure limits are exceeded or if irritation or other symptoms are experienced.
Exposure Limits:
Country-USA
Source-ACGIH
Type-TWA
Value-N/A

Country-USA
Source-OSHA
Type-PEL
Value-N/A


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance:
Solid
Odor:
Not Available
Melting Point:
Not Available
Boiling Point:
Not Available
Density:
Not Available
Refractive Index, n20D:
Not Available
Viscosity:
Not Available
Solubility in Water:
Insoluble


SECTION 10. STABILITY AND REACTIVITY

Stability:
Stable under normal temperatures and pressures.
Incompatibility:
Strong oxidizing agents.


SECTION 11. TOXICOLOGICAL INFORMATION

RTECS Reference:
Not Available
Target Organs:
Not Available
Toxicity Data:
Not Available


SECTION 12. ECOLOGICAL INFORMATION

Not Available


SECTION 13. DISPOSAL CONSIDERATIONS

Contact a licensed professional waste disposal service. Dispose in a manner consistent
with federal, state and local environmental regulations.


SECTION 14. TRANSPORT INFORMATION

DOT Shipping Name: Vanadium Compound N.O.S.
DOT UN Number: UN3285
DOT Hazard Class: 6.1
DOT Packing Group: II
IATA Shipping Name: Vanadium Compound N.O.S.
IATA UN Number: UN3285
IATA Hazard Class: 6.1
IATA Packing Group: II


SECTION 15. REGULATORY INFORMATION

United States:
Toxic Substance Control Act (TSCA): Listed
Superfund Amendments and Reauthorization Act (SARA 302): Not listed
Superfund Amendments and Reauthorization Act (SARA 313): Not listed
European Union:
European Inventory of Existing Chemical Substances (EINECS): No. 252-605-6
Hazard Codes: Not listed
Risk Statements: Not listed
Safety Statements: Not listed
Canada
Canadian Domestic Substances List (DSL): Not listed
Canadian Domestic Substances List (NDSL): Not listed


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Vanadium Telluride Sputtering Target

Telluride IonVanadium Telluride Sputtering Target (VTe2) is a crystal grown product generally immediately available in most volumes. Technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Chemical Identifiers

Linear Formula VTe2
MDL Number N/A
EC No. 252-605-6
Beilstein/Reaxys No. N/A
Pubchem CID 118836
IUPAC Name Ditellanylidenevanadium
SMILES [Te]=[V]=[Te]
InchI Identifier InChI=1S/2Te.V
InchI Key OOEISWVDKCZSMS-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Vanadium products. Vanadium (atomic symbol: V, atomic number: 23) is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. Vanadium Bohr ModelThe number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance. Elemental VanadiumIt is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.

See more Tellurium products. Tellurium (atomic symbol: Te, atomic number: 52) is a Block P, Group 16, Period 5 element with an atomic radius of 127.60. Tellurium Bohr ModelThe number of electrons in each of tellurium's shells is 2, 8, 18, 18, 6 and its electron configuration is [Kr] 4d10 5s2 5p4. Tellurium was discovered by Franz Muller von Reichenstein in 1782 and first isolated by Martin Heinrich Klaproth in 1798. In its elemental form, tellurium has a silvery lustrous gray appearance. The tellurium atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Elemental TelluriumTellurium is most commonly sourced from the anode sludges produced as a byproduct of copper refining. The name Tellurium originates from the Greek word Tellus, meaning Earth.

TODAY'S TOP DISCOVERY!

November 24, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions