Aluminum Copper Manganese Rotatable Sputtering Target

Linear Formula:

Al Mn Cu

MDL Number:

N/A

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Al-Cu-Mn Rotatable Sputtering Target
ALCU-MN-02-STR
Pricing > SDS > Data Sheet >
(2N5) 99.5% Al-Cu-Mn Rotatable Sputtering Target
ALCU-MN-025-STR
Pricing > SDS > Data Sheet >
(3N) 99.9% Al-Cu-Mn Rotatable Sputtering Target
ALCU-MN-03-STR
Pricing > SDS > Data Sheet >
(3N5) 99.95% Al-Cu-Mn Rotatable Sputtering Target
ALCU-MN-035-STR
Pricing > SDS > Data Sheet >
(4N) 99.99% Al-Cu-Mn Rotatable Sputtering Target
ALCU-MN-04-STR
Pricing > SDS > Data Sheet >
(5N) 99.999% Al-Cu-Mn Rotatable Sputtering Target
ALCU-MN-05-STR
Pricing > SDS > Data Sheet >

Aluminum Copper Manganese Rotatable Sputtering Target Properties (Theoretical)

Compound Formula AlMnCu
Appearance Metallic Target
Melting Point 643-654 °C
Boiling Point N/A
Density 2.73 g/cm3
Solubility in H2O N/A
Electrical Resistivity 0.00000349 ohm-cm
Poisson's Ratio 0.33
Specific Heat 0.893 J/g-°C
Tensile Strength 110 MPa (Ultimate)
Thermal Conductivity 193 W/m-K
Thermal Expansion 21.5 µm/m-°C (up to 20 °C)

Aluminum Copper Manganese Rotatable Sputtering Target Health & Safety Information

Signal Word Warning
Hazard Statements H319
Hazard Codes Xi
Risk Codes 36
Safety Statements 26-36
RTECS Number N/A
Transport Information N/A
WGK Germany 3
MSDS / SDS

About Aluminum Copper Manganese Rotatable Sputtering Target

Ultra High Purity Aluminum Copper Manganese Rotatable Sputtering TargetsAmerican Elements specializes in producing high purity Aluminum Copper Manganese Rotatable Sputtering Targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Rotatable Targets for large area thin film deposition are produced either by spray coating on a tubular substrate or casting of a solid tube. Rotary Targets (Cylindrical Targets) are available with dimensions and configurations up to 1,000 mm in length for large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes. Other shapes are available by request.

Aluminum Copper Manganese Rotatable Sputtering Target Synonyms

3003 Alloy, Aluminium 3003 alloy, 3.0517, A93003, AlMn, Al-Mn, Aluminum-manganese, Aluminum 3003-H18

Chemical Identifiers

Linear Formula Al Mn Cu
MDL Number N/A
EC No. N/A

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

Aluminum

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Manganese

See more Manganese products. Manganese (atomic symbol: Mn, atomic number: 25) is a Block D, Group 7, Period 4 element with an atomic weight of 54.938045. Manganese Bohr ModelThe number of electrons in each of Manganese's shells is [2, 8, 13, 2] and its electron configuration is [Ar] 3d5 4s2. The manganese atom has a radius of 127 pm and a Van der Waals radius of 197 pm. Manganese was first discovered by Torbern Olof Bergman in 1770 and first isolated by Johann Gottlieb Gahn in 1774. In its elemental form, manganese has a silvery metallic appearance. Elemental ManganeseIt is a paramagnetic metal that oxidizes easily in addition to being very hard and brittle. Manganese is found as a free element in nature and also in the minerals pyrolusite, braunite, psilomelane, and rhodochrosite. The name Manganese originates from the Latin word mangnes, meaning "magnet."

TODAY'S TOP DISCOVERY!

November 21, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions