Stainless Steel Powder

CAS #:

Linear Formula:

Fe/Cr/Ni

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Stainless Steel Powder
SS-ALLY-01-P
Pricing > SDS > Data Sheet >

Stainless Steel Powder Properties (Theoretical)

Appearance Powder
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A

Stainless Steel Powder Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/21/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Stainless Steel Powder

Product Number: All applicable American Elements product codes, e.g. SS-ALLY-01-P

CAS #: 65997-19-5

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

· Classification of the substance or mixture
GHS02 Flame
Flam. Sol. 2 H228 Flammable solid.
· Label elements
· GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).

Flame - GHS02

· Hazard pictograms
GHS02
· Signal word Warning
· Hazard statements
H228 Flammable solid.
· Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· Classification system:
· NFPA ratings (scale 0 - 4)



Health = 0
Fire = 0
Reactivity = 0
· HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY



Health = 0
Fire = 0
Reactivity = 0
· Other hazards
· Results of PBT and vPvB assessment:
· PBT: N/A.
· vPvB: N/A.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

· Substances
· CAS No. Description
7439-89-6 iron
· Identification number(s)
· EC number: 231-096-4


SECTION 4. FIRST AID MEASURES

· Description of first aid measures
· If inhaled: Supply fresh air; consult doctor in case of complaints.
· In case of skin contact: Immediately rinse with water.
· In case of eye contact: Rinse opened eye for several minutes under running water. Consult a physician.
· If swallowed: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed No information available.
· Indication of any immediate medical attention and special treatment needed
No information available.


SECTION 5. FIREFIGHTING MEASURES

· Extinguishing media
· Suitable extinguishing media:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Special hazards arising from the substance or mixture No information available.
· Advice for firefighters
· Protective equipment: No special measures required.


SECTION 6. ACCIDENTAL RELEASE MEASURES

· Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
· Environmental precautions: No special measures required.
· Methods and material for containment and cleanup:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

· Handling:
· Precautions for safe handling No special precautions are necessary if used correctly.
· Information about protection against explosions and fires: Keep ignition sources away - Do not smoke.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Keep receptacle tightly sealed.
· Specific end use(s) No information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

· Additional information about design of technical systems: No further data; see item 7.
· Control parameters
· Components with limit values that require monitoring at the workplace: Not required.
· Additional information: The lists that were valid during the creation were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures: Wash hands before breaks and at the end of work.
· Breathing equipment: Not required.
· Protection of hands:
SProtective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Safety glasses


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

· Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Powder
Color: gray
· Odor: Odorless
· Odor threshold: No data available.
· pH: N/A.
· Melting point/range: 1535 °C (2795 °F)
Boiling point/range: 3000 °C (5432 °F)
· Flash point: N/A.
· Flammability (solid, gas): Product is not flammable.
· Ignition temperature:
Decomposition temperature: No data available.
· Auto igniting: No data available.
· Danger of explosion: No data available.
· Explosion limits:
Lower: No data available.
Upper: No data available.
· Vapor pressure: 1mm (1787 hPa (1mm (1340 mm Hg)
· Density at 20 °C (68 °F): 7.86 g/cm³ (65.592 lbs/gal)
· Bulk density at 20 °C (68 °F): 2900 kg/m³
· Relative density No data available.
· Vapor density N/A.
· Evaporation rate N/A.
· Solubility in / Miscibility with
Water: Insoluble.
· Partition coefficient (n-octanol/water): No data available.
· Viscosity:
Dynamic: N/A.
Kinematic: N/A.
· Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Solids content: 100.0 %
· Other information No information available.


SECTION 10. STABILITY AND REACTIVITY

· Reactivity No information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid No information available.
· Incompatible materials: No information available.
· Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

· Information on toxicological effects
· Acute toxicity:
· Primary irritant effect:
· on the skin: No irritant effect.
· on the eye: No irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
Substance is not listed.
· NTP (National Toxicology Program)
Substance is not listed.
· OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

· Toxicity
· Aquatic toxicity: No information available.
· Persistence and degradability: No information available.
· Behavior in environmental systems:
· Bioaccumulative potential: No information available.
· Mobility in soil: No information available.
· Additional ecological information:
· General notes: Not known to be hazardous to water.
· Results of PBT and vPvB assessment:
· PBT: N/A.
· vPvB: N/A.
· Other adverse effects No information available.


SECTION 13. DISPOSAL CONSIDERATIONS

· Waste treatment methods
· Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

· UN-Number
· DOT, ADN, IMDG, IATA not regulated
· UN proper shipping name
· DOT, ADN, IMDG, IATA not regulated
· Transport hazard class(es)
· DOT, ADN, IMDG, IATA
· Class not regulated
· Packing group
· DOT, IMDG, IATA not regulated
· Environmental hazards:
· Marine pollutant: No
· Special precautions for user N/A.
· Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code N/A.
· UN "Model Regulation": not regulated


SECTION 15. REGULATORY INFORMATION

· Safety, health and environmental regulations/legislation specific for the substance or mixture
· Sara
· Section 355 (extremely hazardous substances):
Substance is not listed.
· Section 313 (Specific toxic chemical listings):
Substance is not listed.
· TSCA (Toxic Substances Control Act):
Substance is listed.
· Proposition 65
· Chemicals known to cause cancer:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
· Chemicals known to cause developmental toxicity:
Substance is not listed.
· Carcinogenic categories
· EPA (Environmental Protection Agency)
Substance is not listed.
· TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
· NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
· GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
· Hazard pictograms
GHS02
· Signal word Warning
· Hazard statements
H228 Flammable solid.
· Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Stainless Steel Powder

Ultra High Purity Metal PowdersAmerican Elements specializes in producing Stainless Steel Powder in various grain sizes ranging from very fine to very coarse. All stainless steels are alloys composed primarily of iron, a small amount of carbon and a minimum of 10.5% chromium, in addition to varying amounts of other elements such as nickel, manganese, niobium, titanium, and molybdenum. Our standard powder particle sizes average in the range of- 325 mesh,- 100 mesh, 1-50 microns and submicron (< 1 micron). We can also provide many materials in the nanoscale range. American Elements can produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and new proprietary technologies. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional research, technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Stainless Steel Powder Synonyms

201, 301, 301 Full Hard, 302, 304, 304L, 304-L, DQ, DDQ, EDDQ, 305, 310/310S, 316, SS316, 316L, 316-L, 316LVM, 321, 347, 18/8, Cold 100, 409 L, 409 AL, UF, 410 L, 430 L, 434 L, 439, 441, PH1, 40-45 HRC, 15-5, 17-4, Greek Ascoloy 418, MS 5616, 17-4 Precipitation Hardening, 17-4 PH, Type 630, Cr-Ni-Mo-Fe-Mn Alloy, Cr17-Ni14-Mo2-Fe65-Mn1.5, inox steel, inox, Austenite, austenitic steel, Martensitic steel, ferritic stainless steel, Ludlum alloy AL-6XN, 254SMO, duplex stainless steel , CAS 12597-68-1

Chemical Identifiers

Linear Formula Fe/Cr/Ni
MDL Number N/A
EC No. N/A

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Chromium

See more Chromium products. Chromium (atomic symbol: Cr, atomic number: 24) is a Block D, Group 6, Period 4 element with an atomic weight of 51.9961. Chromium Bohr ModelThe number of electrons in each of Chromium's shells is 2, 8, 13, 1 and its electron configuration is [Ar] 3d5 4s1. Louis Nicolas Vauquelin first discovered chromium in 1797 and first isolated it the following year. The chromium atom has a radius of 128 pm and a Van der Waals radius of 189 pm. In its elemental form, chromium has a lustrous steel-gray appearance. Elemental ChromiumChromium is the hardest metallic element in the periodic table and the only element that exhibits antiferromagnetic ordering at room temperature, above which it transforms into a paramagnetic solid. The most common source of chromium is chromite ore (FeCr2O4). Due to its various colorful compounds, Chromium was named after the Greek word 'chroma.' meaning color.

Iron

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.

Nickel

See more Nickel products. Nickel (atomic symbol: Ni, atomic number: 28) is a Block D, Group 4, Period 4 element with an atomic weight of 58.6934. Nickel Bohr ModelThe number of electrons in each of nickel's shells is [2, 8, 16, 2] and its electron configuration is [Ar]3d8 4s2. Nickel was first discovered by Alex Constedt in 1751. The nickel atom has a radius of 124 pm and a Van der Waals radius of 184 pm. In its elemental form, nickel has a lustrous metallic silver appearance. Nickel is a hard and ductile transition metal that is considered corrosion-resistant because of its slow rate of oxidation. Elemental NickelIt is one of four elements that are ferromagnetic and is used in the production of various type of magnets for commercial use. Nickel is sometimes found free in nature but is more commonly found in ores. The bulk of mined nickel comes from laterite and magmatic sulfide ores. The name originates from the German word kupfernickel, which means "false copper" from the illusory copper color of the ore.

TODAY'S TOP DISCOVERY!

December 21, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks

Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks