Tungsten(V) Ethoxide

CAS #:

Linear Formula:

W(C2H5O)5

MDL Number:

MFCD00078041

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Tungsten(V) Ethoxide
W5-ETOX-01-LIQ
Pricing > SDS > Data Sheet >

Tungsten(V) Ethoxide Properties (Theoretical)

Compound Formula C10H25O5W
Molecular Weight 409.14
Appearance Dark red liquid
Melting Point N/A
Boiling Point 110-115°C
Density N/A
Solubility in H2O Insoluble
Exact Mass 409.121094
Monoisotopic Mass 409.121094

Tungsten(V) Ethoxide Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319
Hazard Codes Xi
Precautionary Statements P280g-P305+P351+P338
Flash Point >110 °C
Risk Codes 36/38
Safety Statements 26-37
RTECS Number N/A
Transport Information NONH for all modes of transport
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/18/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Tungsten(V) Ethoxide

Product Number: All applicable American Elements product codes, e.g. W5-ETOX-01-LIQ

CAS #: 26143-11-3

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
H315 Skin Irrit. 2 R38, R36/38, R36/37/38, R37/38
H319 Eye Irrit. 2 R36, R36/37, R36/38, R36/37/38
H335 STOT SE 3a R37, R36/37, R36/37/38, R37/38
Label elements

Exclamation Mark - GHS07

Signal Word Warning
Hazard Statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary Phrases
P264 Wash hands thoroughly after handling.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
Other Hazards
Additional precautionary phrases are located throughout the safety data sheet


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
Tungsten(v)ethoxide, 95%
Assay:100%
CAS Number: 26143-11-3


SECTION 4. FIRST AID MEASURES

Description of first aid measures
Skin Contact
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P332 + P313: If skin irritation occurs: Get medical advice/attention.
Eye Contact
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313: If eye irritation persists: Get medical advice/attention.
Ingestion - Wash out mouth with water.
Inhalation - P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Most important symptoms and effects: No symptoms.
Indication of any immediate medical attention
P312: Call a POISON CENTER or doctor/physician if you feel unwell. No additional measures required


SECTION 5. FIREFIGHTING MEASURES

Extinguishing Media
Suitable: Carbon dioxide. Dry chemical powder. Water.
Unsuitable: Do not use water with a full water jet
Special Hazards arising from the substance or mixture
In combustion toxic fumes may form.
Advice for Fire Fighters
Wear protective clothing to prevent contact with skin and eyes.
Wear self-contained breathing apparatus.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personnal Precautions
Refer to section 8 of SDS for personal protection details.
Environmental Precautions
Do not discharge into drains or rivers.
Methods & Materials
Mix with sand or vermiculite.
Transfer to a suitable container.
Preventing the occurence of secondary hazards.
No Special Measures Required


SECTION 7. HANDLING AND STORAGE

Personnal Precautions
Safe Handling
Handle in fume hood.
Wash hands immediately after contamination.
P264: Wash hands thoroughly after handling.
Protection against explosions and fires
P362: Take off contaminated clothing and wash before reuse. normal measures for preventive fire protection
Conditions for safe storage, including any incompatibilities
Managing Storage Risks
Keep container tightly closed. Store in cool, well ventilated area.
Storage Controls: No special requirements
Maintaining Integrity: Keep in tightly closed container in cool area away from direct sunlight or heat sources.
Other advice:
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
Specific End Uses
The end use(s) have not been fully determined. The substance is supplied for Research and Development purposes by professionals only.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control Parameters
No Data Available
Exposure Controls
General protective and hydgiene measures
P280: Wear protective gloves/protective clothing/eye protection/face protection. The standard precautionary measures should be adhered to when handling Wash hands during breaks and at the end of handling the material Immediately remove any contaminated clothing.
Engineering measures: P271: Use only outdoors or in a well-ventilated area. Ensure there is sufficient ventilation of the area.
Eye / Face Protection: Safety Glasses.
Hand protection: Protective gloves.
Respiratory protection: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. Respiratory protection not required
Skin protection: Protective clothing.
Other personal protection advice: no data


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Physical and Chemical Properties
Appearance: Purple-black liquid
Odor: Characteristic
Odor threshold: No Data Available
PH: No Data Available
Melting point / Freezing point: <20°C
Initial boiling point and boiling range: 110-115°C @ 1mm
Flash point: >110°C
Evaporation rate: No Data Available
Flammability(solid,gas): No Data Available
Upper/lower flammability or explosive limits: No Data Available
Vapor pressure: 20°: <0.1mm
Vapor density: No Data Available
Relative density: No Data Available
Solubility(ies): No Data Available
Partition coefficient: n-octanol/water: No Data Available
Auto-ignition temperature: No Data Available
Decomposition temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidising properties: No Data Available
Other Information
No additional information available


SECTION 10. STABILITY AND REACTIVITY

Reactivity
Reacts with water.
Stability
Stable under normal conditions.
Possibility of Hazardous Reactions
Material decomposes slowly in contact with moist air or with water liberating ethanol; TLV(TWA) = 1000ppm
Conditions to Avoid
no specific conditions to avoid
Incompatible Materials
Strong oxidizing agents.
Hazardous Decomposition Products
In combustion emits toxic fumes.
In combustion emits toxic fumes of ethanol
In combustion emits toxic fumes of organic acid vapors
In combustion emits toxic fumes of tungsten oxide.


SECTION 11. TOXICOLOGICAL INFORMATION

Information
Acute Toxicity: no data
Skin corrosion/irritation: irritant for skin and mucous membranes
Serious eye Damage/irritation: irritant effect
Respiratory or skin sensitisation: No sensitizing effect known
Germ Cell mutagenicity: not known
Carcinogenicity: not known
Reproductive toxicity: not known
STOT-single exposure: not known
STOT-repeated exposure: not known
Aspiration hazard: not known
Additional
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
No classification data on carcinogenic properties of this material is available from the EPA, IARC,NTP,OSHA or ACGIH


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
not known
Persistance and degradability
not known
Bio-Accumulative Potential
not known
Mobility and Soil
not known
Results of PBT & vPvB assessment
not known
Other adverse effects
not known


SECTION 13. DISPOSAL CONSIDERATIONS

Waste Treatment Methods
Disposal Operations:
Consult official regulations for proper disposal. Hand over to authorised disposal company as hazardous waste.
Disposal of Packaging:
Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

Air (ICAO)
None Hazardous
Road (ADR)
None Hazardous
Sea (IMDG)
None Hazardous


SECTION 15. REGULATORY INFORMATION

Safety, health, environmental and national regulations:
product is not subject to any additional regulations or provisions
Safety Assessment
No Chemical Safety Assessment


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Tungsten(V) Ethoxide

Tungsten(V) Ethoxide is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Tungsten(V) Ethoxide Synonyms

Tungsten(5+) pentaethanolate, tungsten pentaethoxide, ethanol, tungsten(5+) salt (5:1), Pentaethoxywolfram(V), WO(OEt)4

Chemical Identifiers

Linear Formula W(C2H5O)5
MDL Number MFCD00078041
EC No. N/A
Beilstein/Reaxys No. N/A
Pubchem CID 57357833
IUPAC Name ethanolate; tungsten
SMILES CC[O-].CC[O-].CC[O-].CC[O-].CC[O-].[W+5]
InchI Identifier InChI=1S/5C2H5O.W/c5*1-2-3;/h5*2H2,1H3;/q5*-1;+5
InchI Key RBZKAYBXYBXUCL-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Tungsten

See more Tungsten products. Tungsten (atomic symbol: W, atomic number: 74) is a Block D, Group 6, Period 6 element with an atomic weight of 183.84. The number of electrons in each of tungsten's shells is [2, 8, 18, 32, 12, 2] and its electron configuration is [Xe] 4f14 5d4 6s2. Tungsten Bohr ModelThe tungsten atom has a radius of 139 pm and a Van der Waals radius of 210 pm. Tungsten was discovered by Torbern Bergman in 1781 and first isolated by Juan José Elhuyar and Fausto Elhuyar in 1783. In its elemental form, tungsten has a grayish white, lustrous appearance. Elemental TungstenTungsten has the highest melting point of all the metallic elements and a density comparable to that or uranium or gold and about 1.7 times that of lead. Tungsten alloys are often used to make filaments and targets of x-ray tubes. It is found in the minerals scheelite (CaWO4) and wolframite [(Fe,Mn)WO4]. In reference to its density, Tungsten gets its name from the Swedish words tung and sten, meaning heavy stone.

TODAY'S TOP DISCOVERY!

November 18, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions